Sport 4x4 Manual Suv 3.6l Driver & Front Passenger Frontal Airbags Fog Lamps on 2040-cars

Auto blog

Jeep Wrangler-based Scrambler pickup will have open tops, longer frame

We'll probably have to wait until 2019 to see the Wrangler pickup fully revealed and on dealer lots, but it seems that the truck is already showing up in FCA's computer systems. Someone at Jeep Scrambler Forum did a little digging and found the truck's chassis code, "JT," listed with a number of parts. Among those parts were different tops, seemingly confirming that the Wrangler pickup will have a soft folding top and removable hardtops available, just like a normal Wrangler. These include the plain black soft top, a black hard top, or a body-color hard top. The hard tops are also listed as three-piece units like on a conventional Wrangler, so parts can be removed, or the entire top. The forum quotes sources as saying the pickup will be called the Jeep Scrambler. The company renewed the trademark on that model name in 2015. The forum discovered a few other mechanical details, too. The truck's code is listed under the diesel engine option, confirming that powertrain for the pickup, though no other engine or transmission info was found. The forum also found CAD models of the frame and axles. Jeep Scrambler Forum estimates the frame is about 33 inches longer than the upcoming Wrangler Unlimited four-door SUV. This isn't entirely surprising, as photos show that the Wrangler pickup prototypes are substantially longer than the four-door Unlimited models. And even AEV had to lengthen the Wrangler's frame to turn it into the Brute pickup. Finally, the forum noted that the axles are different from the current generation of Wrangler, and could possibly be stronger than normal for improved towing and payload. Related Video: Related Gallery 2019 Jeep Wrangler Pickup Spy Shots View 14 Photos News Source: Jeep Scrambler ForumImage Credit: Jeep Scrambler Forum Rumormill Jeep Truck Off-Road Vehicles jeep wrangler pickup

Buy this instead of a Wrangler | 2017 Jeep Grand Cherokee Trailhawk Review

In our first encounter with the 2017 Jeep Grand Cherokee Trailhawk at Fiat Chrysler's Chelsea Proving Grounds, we saluted the new model's impressive on-road demeanor. In its off-road mode, however, we couldn't ignore the pre-production throttle calibration – it was super sharp and difficult to modulate with the precision needed to navigate obstacles. We were told then that Jeep's engineers were aware of the problem and were fixing it for production models. So we recently set off for Bundy Hill Off-Road Park in Jerome, Michigan, in a production-spec Grand Cherokee Trailhawk to check their work and get a better idea of the overall package. We can report that the Trailhawk's throttle has been fixed for production, landing it properly in Goldilocks territory. In the off-road Mud setting, the throttle is soft and easy to modulate. You can balance this rig with the gas pedal, reaching just past tip-in to steadily prod forward. But the gas pedal doesn't delay when you really need power. Move beyond the initial tip-in, and the engine responds quickly, which is a good thing, as a sluggish throttle is almost as dangerous off-road as one that's too sharp. Rock mode promises even more precise control over the throttle, although our lack of a spotter and a desire to avoid damaging the 700-mile-young Trailhawk kept us from hitting Bundy Hill's rockier sections. The wet, non-snowy weather meant we didn't properly test Snow or Sand mode. This test model was equipped with FCA's popular 3.6-liter V6, but like the rest of the Grand Cherokee range, more power is available from the 3.0-liter EcoDiesel V6 and the 5.7-liter Hemi V8. You don't need them – the 3.6-liter and eight-speed automatic are perfectly fine on the trails. Faced with an incline, the transmission holds its gear without complaint – you don't even need to switch into manual mode. Despite the 4,800-rpm torque peak, the V6's 260 pound-feet arrive early enough that you don't need to strong-arm the throttle. So that's resolution for the pre-production issue. But our time at Bundy Hill exposed a different and ultimately much easier to fix problem for the production model. Late fall in Michigan is not always a good time to go off-road – sub-40-degree temperatures and a steady, depressing drizzle can turn a relatively simple trail into a slippery mess of wet clay. Conditions like these can easily overwhelm an on-road tire like the Goodyear All-Terrain Adventures the Trailhawk uses.

Jeep Liberty under investigation for door fires

The Jeep Liberty has already had plenty of attention for possible fires thanks to the first-gen model's fuel tank, but now the midsize Jeep is under the microscope of the National Highway Traffic Safety Administration for another fire-related concern. NHTSA has opened an investigation for the 2012 Liberty after receiving two reports of electrical fires in the driver's door.
According to the investigation summary, around 80,000 vehicles could potentially be affected by this problem. In both reported fires, the drivers noticed smoke and then flames from the master power window switch, and they had to pull to a stop and exit through the passenger side of the SUV. According to Autoguide, there was one injury to a motorist who suffered burned fingers while trying to open the driver's door.
Interestingly, the Dodge Nitro is not yet involved in this investigation, even though it was still around for the 2012 model year; the Nitro ended production in 2011 about a year before the final Liberty rolled off the line for the 2013 model year. Scroll down for the official NHTSA investigation summary.