2021 Jeep Wrangler Willys Sport 4x4 on 2040-cars

Auto blog

FCA recalling 63k Jeeps, Vipers and Ram ProMaster City vans

Fiat Chrysler Automobiles has announced a pair of recalls cover nearly 63,000 vehicles. The bigger of the two actions covers manual-transmission-equipped vehicles from 2006, including the Jeep Liberty and Wrangler, as well as the Dodge Viper. FCA engineers uncovered that the clutch ignition interlock switches use a kind of wire that was part of a previous recall campaign. Because of this, the company said that affected vehicles may not start, although in rare cases, "if recommended starting procedures are not followed," the affected vehicles may lurch forward after turning the key. Those recommended starting procedures "include activating the parking brake, placing the shift lever in neutral and pressing the clutch pedal before turning the vehicle's ignition key." Recall number two affects the company's 2015 Ram ProMaster City cargo and passenger vans. Owners will need to report to dealers to have a piece of tape removed from the side-curtain airbags. The tape is added during assembly and in some cases, may not have been removed. That could prevent the airbags from deploying in the event of a crash. Just under 59,000 vehicles are included in the first recall, including 43,874 in the United States, 11,309 outside of North America, 2,944 in Canada and 706 in Mexico. The ProMaster City recall includes just over 3,900 vehicles. FCA claims it's unaware of any injuries, fatalities or accidents related to either recall and will perform repairs free of charge. Scroll down for the official press release on both campaigns. Related Video: Statement: Clutch Ignition Interlock Switch April 23, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary recall of an estimated 43,874 older-model U.S.-market cars and SUVs equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. The action follows an investigation by FCA US engineers that discovered these vehicles are equipped with switches that contain a certain type of wire implicated in a previous campaign. The wire, which was temporarily substituted by a supplier for the specified material, may break. As a result, the vehicles may not start, and in rare cases – if recommended starting procedures are not followed – a vehicle may exhibit unintended movement when its ignition key is turned. FCA US is unaware of aware of any related injuries or accidents involving this population of vehicles.

Build a Jeep Gladiator 392 next? The Hummer H3T Alpha blazed the trail

The 2021 Wrangler Rubicon 392 will combine the go-anywhere capability of a Jeep's iconic off-roader with the grunt of a V8 for the first time in decades. As cool as that is, we can't help but think Jeep is missing out on a huge opportunity to pair that 470-horsepower, 6.4-liter Hemi V8 with the Wrangler's pickup cousin, the Jeep Gladiator, in the form of a Mojave 392.  Autoblog took part in a media Q&A session with Jeep ahead of the Rubicon 392's announcement in which the company's product higher-ups said that there are currently no official plans to build a 392 variant of the Gladiator pickup. But whether or not Jeep has plans, it certainly has precedent, and from our perspective, a market.  Rewind to 2008, better known as one of the worst possible years to introduce a gas-guzzling, V8-powered pickup truck. Enter the 2009 Hummer H3T Alpha, the first variant of Hummer's midsize truck/SUV hybrid to be offered with a 5.3-liter V8. The 300-horsepower small-block was an upgrade to the sturdy but relatively uninspiring 3.7-liter inline-5 that the H3 lineup had inherited from its midsize pickup platform mates.  As our Jeremy Korzeniewski noted in the Rubicon 392's introductory piece, an open-top Jeep has not been offered with an optional V8 for as long as the "Wrangler" nameplate has existed. The last Jeep 4x4 to do so was still a CJ, or civilian Jeep, and the 304 cubic-inch engine came from American Motors Corporation. Incidentally, this generation of the Wrangler is also the first to be offered in a pickup variant. Cue the beard-stroking.  Now, frankly, it's not even remotely fair to compare the H3T's powertrain offerings to the decade-newer Gladiator's, but the Hummer actually boasts a few advantages over Jeep's modern pickup. While most of the Jeep's off-road specs give it an edge, the Gladiator doesn't come close to the H3T's 30.1-degree departure angle, for instance. And in more practical terms, the stubbier H3T has other maneuverability advantages. The Gladiator has 3" of wheelbase and 5" of overall length on the H3T, and a 22.4-foot turning radius to show for it. The Hummer's? Just 18.5'.

Fiat 500X poised for Paris catwalk

We've known for some time that the new, Fiat-based baby Jeep (which may or may not be called the Jeepster) is set to arrive at the 2014 Geneva Motor Show. What we weren't sure of was whether its platform mate, the so-called Fiat 500X, would be doing so alongside or at a later date. Well, according to Reuters, we'll get to see the first all-wheel-drive 500 later this year in the City of Lights.
Yes, we can expect the 500X to arrive at the 2014 Paris Motor Show, according to an official with an Italian trade union. The unnamed source cited retooling at Fiat's Melfi factory, in southern Italy, which currently produces the Grande Punto. It's expected that the newest member of the growing 500 family will replace the Suzuki SX4-based Fiat Sedici, although when the X will go on sale remains an open question.
According to Reuters, both the Jeepster and 500X will be built alongside each other in Italy. Whether the 500X will cross the pond with it's slat-grilled cousin, though, remains to be seen (we're leaning towards yes).