2019 Jeep Wrangler Unlimited Rubicon on 2040-cars

Auto blog

Hellcat motor 'fits like a glove' in the Wrangler and Gladiator, says Jeep

Just like "technically correct" is the best kind of correct, "technically possible" is the best kind of possible. Specifically, it's technically possible to slot a Hellcat crate motor into the Jeep Wrangler and Gladiator, as confirmed by Jeep brand chief Tim Kuniskis. Speaking to Australian media last week, Kuniskis went on to say that "everybody" keeps asking him if the supercharged, 6.2-liter Hellcat V8 fits in the Wrangler and Gladiator, and that the answer is yes. "It fits like a glove," said Kuniskis. But — there is a but — the fitment is so close for comfort, it makes the combination one that Jeep can never produce. "There's no air space around the engine [...] so you have no crush space, you have nothing that can be used to absorb energy in a crash. It's not a problem to put it in — other than emissions and fuel economy — except it would never pass any crash tests, and that's a problem," as Kuniskis told Drive. However, since the Hellcat is now out of the bag, it's probably only a matter of time until hobbyists with access to these engines will start putting them into Wranglers and Gladiators. And with the time-honored piece of advice — just don't crash into anything — it'd be a combination worth seeing and hearing. Just to throw it out there, a "Hellcrate" engine costs less than $20,000 new. Kuniskis also said that Jeep is "gauging interest" for the J6 concept, one of the Easter Jeep Safari concepts that were just revealed. "[The J6] is just a concept at this stage. But that doesn't mean we're not going to gauge interest for it." However, he said justifying its production is apparently "tough."

Jeep and Ram diesel owners get $3,075 in lawsuit settlement

Owners of certain Ram 1500 and Jeep Grand Cherokees equipped with diesel engines will get up to $3,075 in compensation for repairs under a settlement of a class-action lawsuit against Fiat Chrysler over illegal emissions-cheating software. The roughly $800 million settlement was first announced in January and approved by a federal judge in California last week, according to Consumer Reports. The affected vehicles are 2014 to 2016 Ram 1500 pickup trucks and Jeep Grand Cherokee SUVs equipped with 3.0-liter EcoDiesel V6 engines. FCA will update the emissions control software, provide an extended warranty covering up to 10 years or 120,000 miles, and provide cash compensation. Eligible owners will get as much as $3,075, while eligible lessees, former lease holders and former owners will get up to $990, and partial owners will get up to $2,460. FCA has established an EcoDiesel Settlement website where affected owners can find more information on how to submit and track a claim and sign up for updates. Customers with questions can also call 833-280-4748. Vehicle owners will have 21 months to submit a claim, with a deadline of Feb. 3, 2021, and two years to complete the repair and receive compensation for it. Former owners and lease holders must submit claims by Aug. 1, 2019. The EPA in early 2017 issued a notice of violation to FCA after Jeep and Ram installed eight emissions control devices on diesel vehicles. FCA's settlement includes $311 million in total civil penalties to U.S. and California regulators, up to $280 million to resolve claims from diesel owners, $105 million in extended warranties, $72.5 million in state civil penalties and $33.5 million in payments to California for excess emissions and to resolve consumer claims. Auto supplier Robert Bosch GmbH, which provided emissions control software, is paying $27.5 million to resolve claims, plus $103.5 million to settle claims with 47 states. The federal court also approved consent decrees between FCA, the EPA and the California Air Resources Board, plus agreements with all 50 stats and the U.S. Customs and Border Protection. In a statement, FCA said, "The settlements contain no findings of wrongdoing, nor admission of any wrongdoing, by FCA US" and added that the software fixes will have no affect on average fuel economy, performance or other characteristics of the vehicles.

FCA inline-six rumored to be real, headed for Jeep Wagoneer

In September, Allpar reported that that clues being dropped at Fiat- Chrysler headquarters, in the carmaker's factories, and on engineer resumes pointed to the development of an inline six-cylinder engine. The site has just proclaimed the rumor is reality, writing that the straight-six, "turbocharged to meet or beat 5.7 Hemi power ratings, with a smoother torque curve, is on the way." The motor's first outing is expected to be either the next-generation Jeep Grand Cherokee, debuting perhaps next year, or the Jeep Wagoneer, debuting in 2020 or 2021. "Tornado" is the purported codename for the power plant said to be just under three liters in displacement, expanding the family begun with the Global Medium Engine 2.0-liter turbo codenamed Hurricane. Engine bay constraints and a long use horizon mean engineers won't simply add two more cylinders to the GME, however. Allpar says the brief is to keep the Tornado GME-T6 — the alphanumeric for "turbocharged six" — no more than three inches longer than the Tigershark 2.4-liter four-cylinder. That means "major design changes" that could include a space-saving head, more closely spaced cylinders, and no cylinder liners. An FCA division called Comau could be called on for its "SmartSpray" plasma lining technology. Allpar muses that the standard version of the engine for Chrysler, Dodge, Jeep, and Ram could get a single twin-scroll turbocharger. Performance trims for Alfa Romeo and Maserati could get different heads and maybe twin turbos, an SRT version might also get both those tweaks. History shows that the Italian versions would make changes to the block, as well. Even so, the Tornado would be less expensive than any Ferrari-supplied V6. A straight-six would put FCA in company with current adopters BMW and Mercedes-Benz, future users like Jaguar, and perhaps Aston Martin. The engine would span the widest range of use cases in the U.S. carmaker's portfolio, though. Potential applications include being a base engine for Ram trucks, serving double duty as a base engine and 5.7-liter Hemi replacement for the Dodge Charger and Challenger, working in the high-end Jeeps, and as a properly hot trim — with Ferrari-designed heads — in the luxury Italian sports cars. The Alfa Romeo Giulia begs for just such motivation to fill the gap between the 280-hp, $42,695 Ti Sport RWD and the 505-hp, $73,700 Giulia Quadrifoglio RWD. And a twin-turbo inline-six in a Maserati Alfieri would stack up nicely with the Germans.