2014 Jeep Wrangler Unlimited on 2040-cars

Auto blog

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums

Completely uncovered 2018 Jeep Wrangler reveals evidence for folding windshield

After months of peering through heavy tarps and vinyl wraps, we finally get our very first look at a 2018 Wrangler without any camouflage at all. The photo comes from a user at JL Wrangler Forums, and it seems to show the truck rolling off the assembly line. Unfortunately, the angle isn't great, but it does give us a look at some of the detail changes to the body compared with the previous one. The most noticeable new detail is the vent that sits in a triangular scallop in the front fender. There's also a tumblehome character line running along the doors. Both of these styling features are consistent with leaked images and fan renderings also published by JL Wrangler Forums. The door handles have also changed, and appear to be more conventional pull-to-open pieces rather than the chunky pushbutton handles on the current Wrangler. It seems like the new Wrangler will still embrace open-air motoring, too. The doors retain exposed hinges that seem to be designed with easy removal in mind. Not only that, but we can see styled rubber pads on the hood. These have been featured on Wranglers all through the years to provide a cushion for when the windshield is folded down. So we would expect the windshield on the new Wrangler to be foldable, too. And, of course, this Wrangler has the traditional fabric folding top. We still expect to see the Wrangler make its official debut at the L.A. auto show, with sales beginning soon after. It will offer gasoline V6 and four-cylinder engines to start, with a diesel version coming later. The Wrangler also will likely gain new features including a hardtop with power sliding panels, and a full-time four-wheel-drive system. Related Video: News Source: JL Wrangler ForumsImage Credit: JL Wrangler Forums Spy Photos Jeep SUV Off-Road Vehicles jeep wrangler jl

164K Jeep Cherokees recalled to protect liftgate from moisture

FCA is recalling 164,003 examples of the 2014 and 2015 Jeep Cherokee because moisture can damage the power liftgate controls on models that are equipped with that feature. Regionally, this includes 99,436 of them in the US, 13,195 in Canada, 2,406 in Mexico, and 48,966 outside of NAFTA. The problem came to light after the automaker started investigating a fire in one of the SUVs. There were no injuries, though. According to FCA US' research, the power hatch's control module potentially can be exposed to water. This can cause a short circuit and possibly a fire, as in this case. Until the issue is repaired, the company is advising owners to keep the cargo area dry on Cherokees equipped with this feature. To fix things, dealers will install a shield around the controls to protect them from moisture and will replace any modules showing exposure to water. Statement: Water-Shield Installation June 24, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 99,436 SUVs in the U.S. to install shields that protect their power liftgate control modules, and related components, from moisture. FCA US LLC began an investigation after learning of a reported vehicle fire. The probe revealed power liftgate control modules in certain SUVs may be inadvertently exposed to water. This may cause a short-circuit, creating a fire hazard. However, the Company is unaware of any related injuries or accidents. The campaign affects model year 2014 and 2015 Jeep Cherokee SUVs, but is limited to vehicles equipped with power liftgates. An estimated 13,195 customers are affected in Canada, along with an estimated 2,406 customers in Mexico and 48,966 outside the NAFTA region. The estimated total recall population is 164,003. All affected customers will be advised when they may schedule service. If the modules show signs of water exposure, they will be replaced. All recall-related work will be performed free of charge. In the interim, the cargo areas of 2014-15 Cherokees equipped with power liftgates should be monitored and kept dry. Customers with questions may call the FCA US Customer Information Center at 1-800-853-1403.