2014 Jeep Wrangler Polar Edition Sport Utility 4-door on 2040-cars

Auto blog

Jeep Wrangler pickup's rear suspension is inspired by Ram

Although we've learned about all there is to know about the new Jeep Wrangler, there is still more to discover about its upcoming truck sibling, such as the rear suspension. We knew it would be coil-sprung, but these new spy shots also indicate that the suspension is more similar to what's under a Ram 1500 than the Wrangler SUV. In the gallery above, the first two images compare the rear suspension of a new-generation 2018 Wrangler (left) and the Wrangler pickup (right). Immediately obvious is that the shocks on the Wrangler SUV are mounted at the back of the axle, while the truck's shocks are mounted at the front. It's also possible to see that the anti-roll bar on the SUV is mounted quite high up, while the truck's bar sits much lower, near the base of the rear axle. The third image shows a Ram 1500 on the left and the Wrangler pickup on the right. Here we can see that the Ram shares the same sort of low-mounted anti-roll bars and forward-mounted shocks, along with a Panhard rod. The two aren't quite the same, though. For one thing, the Wrangler pickup's rear axle looks more like the Wrangler SUV's than the one on the Ram. It's possible that these suspension changes were made in an effort to boost the Wrangler truck's payload capabilities. It's also possible that there are some handling quirks to the long truck body style for which a Ram-style suspension was better suited. We'll look forward to learning more about the differences when the truck is revealed, likely in early 2019. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Marchionne: Midsize pickup still not in the cards; Ram 1500, Jeep Wrangler could use aluminum

During the Fiat-Chrysler briefings on Tuesday, Reid Bigland, head of Ram Trucks, outlined the new product plans for his brand, including confirmation that an all-new light-duty Ram 1500 will launch in 2017. From there, discussions spun off in two directions, with the main questions being: will Ram build a midsize pickup? And, following Ford's move to extensively use aluminum in its new 2015 F-150, will Chrysler be using this weight-saving material for the next round of its fullsize truck, as well?
"I think there is room for a Ram 1000," Fiat-Chrysler CEO Sergio Marchionne (pictured above) told members of the media, saying this is a conversation the automaker has been having internally for several years now. "We've tried this ... we've actually taken it to clinics," Marchionne stated, adding that the "response has been lukewarm."
"I have better use of aluminum in this house than a pickup truck." - Sergio Marchionne

Jeep Liberty under investigation for door fires

The Jeep Liberty has already had plenty of attention for possible fires thanks to the first-gen model's fuel tank, but now the midsize Jeep is under the microscope of the National Highway Traffic Safety Administration for another fire-related concern. NHTSA has opened an investigation for the 2012 Liberty after receiving two reports of electrical fires in the driver's door.
According to the investigation summary, around 80,000 vehicles could potentially be affected by this problem. In both reported fires, the drivers noticed smoke and then flames from the master power window switch, and they had to pull to a stop and exit through the passenger side of the SUV. According to Autoguide, there was one injury to a motorist who suffered burned fingers while trying to open the driver's door.
Interestingly, the Dodge Nitro is not yet involved in this investigation, even though it was still around for the 2012 model year; the Nitro ended production in 2011 about a year before the final Liberty rolled off the line for the 2013 model year. Scroll down for the official NHTSA investigation summary.