2014 - Jeep Wrangler on 2040-cars

Auto blog

Build your own: 2017 Jeep Wrangler Willys Wheeler

While still three weeks from the start of summer, it arrived in practical terms with the Memorial Day weekend. And while the country will have worked through its collective hangover (from too much food, drink and shopping) and gotten back to work, it's worth remembering what – automotively – got us here, preserving both democracy and personal freedoms. The CJ-inspired Jeep Wrangler got us here, and in its Willys Wheeler guise the spirit of America rolls on. As the many spy pics have shown, FCA's Jeep division is working hard to replace its current Wrangler within the next few months. With that, we say goodbye to 10 model years of Wrangling with the current model. And that decade has been a good one for Jeep. Despite the economic downturn between 2008 and 2010, Jeep and Jeep Wrangler sales have been consistent bright spots for FCA, along with – of course – Ram trucks and, uh, Ram trucks. With a new Wrangler around the bend, it's worth taking a look at the existing model. And knowing an all-new example is coming, what would be the reason – if shopping – to consider what's on dealer lots now? Despite the numerous areas of improvement the new model will deliver (in efficiency, refinement and safety) , there's something to be said for a vehicle 10 years into its production cycle. While this is wholly anecdotal, for every step forward a manufacturer makes with a new vehicle, the added tech and necessary complexity seem to mandate two steps back. In an Audi A4, tech would seem a good thing, while in a Wrangler, this Jeep enthusiast would see it as a mixed blessing. Almost 80 years into its evolution (the initial Jeep concept came together in the summer of 1940) little has changed in the Jeep's essential mission. A body-on-frame architecture transports a driver and up to three passengers over paved and unpaved surfaces with credible confidence and a modicum of security. Live axles front and rear enhance the Wrangler's off-road capability, but compromise its on-road behavior. And while a significantly wider track mitigates rollovers, the Wrangler is decades removed from "state-of-the-art" when discussing safety or handling. Currently there's but one engine available in the States, a 3.6 liter normally-aspirated V6 producing 285 horsepower at a you'll-rarely-get-there 6,400 rpm. Connected to either a six-speed manual or ($1,400) five-speed automatic, the engine moves the 4,000-pound (loaded) Wrangler with measured confidence.

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.

Say goodbye to the Dodge Dart and Chrysler 200

Fiat-Chrysler CEO Sergio Marchionne outlined an update to the company's five-year business plan Wednesday, and among the changes, the Dodge Dart and Chrysler 200 sedans will soon be phased out. The company's presentation to investors states that the "market shift from cars to trucks and UVs [utility vehicles is] now seen as permanent shift in demand," and FCA wants to respond as quickly as possible. Killing the 200 and Dart will allow FCA to build more Jeep and Ram models at the Sterling Heights, MI, and Belvidere, IL, plants where the sedans were produced. We already knew FCA was planning to shift 200 and Dart production to Mexico, to free up the Sterling Heights facility for Ram 1500 production, and the Belivdere site for Jeep Cherokee output. The Cherokee will move from its current home in Toledo, OH, to allow for increased Wrangler production. It's no shock that FCA wants to shift its focus to crossovers and trucks. In December 2015, for example, combined sales of the Dodge Dart and Chrysler 200 were 15,310. The Jeep Cherokee, which uses the same platform as the Dart and 200, outsold both models combined, with 24,049 sales. Both the Dart and 200 had troubles from the beginning. Marchionne recently blamed designers for the 200 not receiving a Consumer Reports 'recommended' rating, and the Dart was one of the lowest-scoring cars in a CR reliability study. Featured Gallery 2013 Dodge Dart: Review View 27 Photos Related Gallery 2015 Chrysler 200 View 43 Photos Image Credit: Copyright 2016 Drew Phillips / AOL Chrysler Dodge Jeep RAM FCA confirmed