2008 Jeep Wrangler X Sport Utility 2-door 3.8l on 2040-cars

Auto blog

Chrysler axes old V6s, goes all-Pentastar

Old technology has a way of lingering on, particularly at Chrysler headquarters in Auburn Hills. So while the Pentastar V6 has replaced the older engine architecture in just about every application, it still soldiered on in some export markets. But the introduction of a new 3.0-liter Pentastar V6, produced in Michigan and meant only for the Chinese market, has put the final nail in the old engine's coffin.
Fitted into the 2014 Jeep Grand Cherokee and Jeep Wrangler just introduced to China at the Chengdu Motor Show, the downsized six uses the same architecture as the larger 3.6-liter Pentastar V6. But because of its 2,997cc capacity, it can be exported to China without the increased duty the 3.6-liter or even 3.2-liter Pentastar engines would incur. The 3.0-liter V6 develops 230 horsepower at 6,350 rpm and 210 pound-feet at 4,400 rpm.
Admittedly, it's unlikely, but even though the engine was said to be created solely to undercut tax thresholds in China and Europe, the 3.0-liter Pentastar has recently surfaced in rumors of an application here: as the boosted heart of a potential Cherokee SRT with anywhere from 375 to 410 hp.

FCA recalling 63k Jeeps, Vipers and Ram ProMaster City vans

Fiat Chrysler Automobiles has announced a pair of recalls cover nearly 63,000 vehicles. The bigger of the two actions covers manual-transmission-equipped vehicles from 2006, including the Jeep Liberty and Wrangler, as well as the Dodge Viper. FCA engineers uncovered that the clutch ignition interlock switches use a kind of wire that was part of a previous recall campaign. Because of this, the company said that affected vehicles may not start, although in rare cases, "if recommended starting procedures are not followed," the affected vehicles may lurch forward after turning the key. Those recommended starting procedures "include activating the parking brake, placing the shift lever in neutral and pressing the clutch pedal before turning the vehicle's ignition key." Recall number two affects the company's 2015 Ram ProMaster City cargo and passenger vans. Owners will need to report to dealers to have a piece of tape removed from the side-curtain airbags. The tape is added during assembly and in some cases, may not have been removed. That could prevent the airbags from deploying in the event of a crash. Just under 59,000 vehicles are included in the first recall, including 43,874 in the United States, 11,309 outside of North America, 2,944 in Canada and 706 in Mexico. The ProMaster City recall includes just over 3,900 vehicles. FCA claims it's unaware of any injuries, fatalities or accidents related to either recall and will perform repairs free of charge. Scroll down for the official press release on both campaigns. Related Video: Statement: Clutch Ignition Interlock Switch April 23, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary recall of an estimated 43,874 older-model U.S.-market cars and SUVs equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. The action follows an investigation by FCA US engineers that discovered these vehicles are equipped with switches that contain a certain type of wire implicated in a previous campaign. The wire, which was temporarily substituted by a supplier for the specified material, may break. As a result, the vehicles may not start, and in rare cases – if recommended starting procedures are not followed – a vehicle may exhibit unintended movement when its ignition key is turned. FCA US is unaware of aware of any related injuries or accidents involving this population of vehicles.

Jeep Wrangler pickup's rear suspension is inspired by Ram

Although we've learned about all there is to know about the new Jeep Wrangler, there is still more to discover about its upcoming truck sibling, such as the rear suspension. We knew it would be coil-sprung, but these new spy shots also indicate that the suspension is more similar to what's under a Ram 1500 than the Wrangler SUV. In the gallery above, the first two images compare the rear suspension of a new-generation 2018 Wrangler (left) and the Wrangler pickup (right). Immediately obvious is that the shocks on the Wrangler SUV are mounted at the back of the axle, while the truck's shocks are mounted at the front. It's also possible to see that the anti-roll bar on the SUV is mounted quite high up, while the truck's bar sits much lower, near the base of the rear axle. The third image shows a Ram 1500 on the left and the Wrangler pickup on the right. Here we can see that the Ram shares the same sort of low-mounted anti-roll bars and forward-mounted shocks, along with a Panhard rod. The two aren't quite the same, though. For one thing, the Wrangler pickup's rear axle looks more like the Wrangler SUV's than the one on the Ram. It's possible that these suspension changes were made in an effort to boost the Wrangler truck's payload capabilities. It's also possible that there are some handling quirks to the long truck body style for which a Ram-style suspension was better suited. We'll look forward to learning more about the differences when the truck is revealed, likely in early 2019. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.