1999 Jeep Wrangler Sport 4.0 Liter V-6 Hardtop Removable Air Conditioning 4wd on 2040-cars

Auto blog

2019 Jeep Renegade teased with taillight photo

We've seen a number of 2019 Jeep Renegade prototypes running around lately, and now we know when we'll finally see all the ways the little crossover SUV has been updated: June 6. It will make its debut at the Turin Motor Show. Before then, Jeep did reveal a couple of details, including the above shot of the new taillight design. Though the taillight is very similar to the current version, particularly in how it's still square with a distinct "X" motif in center, it has a few differences. The thick black surround of the current model is gone entirely. It makes way for dark-tinted red plastic to wrap all the way around, and it has indentations that echo the X in the center. That center X isn't all a reverse light anymore. It's now part of the taillight's internal design. Only a small white square in the middle is now for the reverse light. Aside from small styling changes on the lights, Jeep also announced powertrains for the European version of the Renegade. It will be available with at least three gasoline engine options. There will be a roughly 120-horsepower 1.0-liter three-cylinder, and two versions of a 1.3-liter four-cylinder making 150 horsepower or 180. Jeep didn't mention anything about a diesel or a hybrid, the latter of which we expect based on previous spy shots. In the U.S., the Renegade is available either with a 160-horsepower turbocharged 1.4-liter four-cylinder or a 184-horsepower 2.4-liter naturally aspirated four-cylinder. We would assume at least the 1.3-liter engine will make it to the U.S., considering its similar power output to current numbers. Related Video:

NHTSA upgrading Jeep Grand Cherokee, Dodge Durango headliner fire probe

The National Highway Traffic Safety Administration investigation into headliner fires experienced by a small number of Jeep Grand Cherokee and Dodge Durango owners has been upgraded to an engineering analysis, the step before the initiation of a recall. In August last year the investigation began with 146,000 Grand Cherokees from 2012 after three complaints were received, but a report on Edmunds says it has been expanded to include 593,299 vehicles covering the 2011-2013 model years for the Jeep and the Dodge Durango, which uses the same headliner assembly, because of possibly 52 incidents of fire.
In some of those incidents drivers have reported a burning odor, smoke or open flames that were contained to the headliner or migrated to another area of the passenger compartment. The culprit has apparently been found: NHTSA blaming an electrical short in the sun visor vanity light wiring, which is routed under the headliner and held in place by three screws. Chrysler began its own probe into the issue when it was first reported and is still looking into the situation while, "fully supporting the National Highway Traffic Safety Administration's investigation."

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.