1991 Jeep Grand Wagoneer, Rare Final Edition Woody, Low Miles, Carfax Certified on 2040-cars

Auto blog

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.

Jeep bringing Renegade Hard Steel with adorable matching trailer to Geneva

Trailers are hardly an uncommon site. They can, after all, be an effective way of adding cargo capacity when you need to haul more than you can fit in your car and truck. But there's something that just gets us about trailers made to match the vehicle behind which they're being towed. Like this one, attached to this unique Jeep Renegade. Set to be unveiled at the Geneva Motor Show mere days from now, the Renegade Hard Steel concept is a joint effort between various elements of the Fiat Chrysler Automobiles group, including Jeep, Mopar and the FCA Style Centre. It's based on the Trailhawk off-road model, but is distinguished by its unique metallic finish, offset by matte black trim and a full raft of available and custom Mopar accessories. Though Jeep has yet to show us what it looks like inside, it's said to have a specially coated leather finish. And of course there's that trailer. Designed to mimic the Renegade's rear-end styling, the appendage will be used on the floor of the Geneva Palexpo to showcase the vehicle's Uconnect Live infotainment system through an oversized pop-up touchscreen display that mirrors the new 5- or 6.5-inch display that'll soon be available on the littlest of Jeeps, offering streaming content including music, news, social media and traffic conditions. We have no indication that a similar trailer could be going into production (minus, of course, the infotainment stuff), but it's worth noting that Jeep has indeed done something similar before. Feel free to read more in the press release, below. Related Video: 27 February 2015 Renegade Hard Steel Jeep Showcar The Renegade Hard Steel Jeep showcar, which blends style, off-road vocation, and technology, will be making its debut and the 2015 Geneva International Motor Show. Created by the Jeep brand, in collaboration with the Mopar brand and backed by the FCA Style Centre, the showcar "explores" the potential of a model that provides countless customization options, while also providing an outlook for potential future Mopar accessories dedicated to the new Renegade. Based on the Trailhawk - the off-road version of the range - the prototype is not a simple customisation in aftermarket but a design project that, with due respect to the peculiarities of original models, has led us to the creation of a unique and fascinating article.

Jeep Compass, Patriot will stick around for 2017 model year

The Jeep Compass and Patriot may be getting a little long in the tooth, but Fiat Chrysler Automobiles isn't ready to put them to pasture. At least not yet. According to Automotive News, FCA plans to continue producing both models until the end of this calendar year. That will also take them both into the 2017 model year as the manufacturer prepares to introduce their shared successor. Jeep will likely build a stockpile of Patriots and Compasses to bridge the gap until the new compact Jeep arrives. The move is just one of many FCA is making to trim unprofitable car models and increase crossover production. The Jeep Cherokee is set to move from its current home in Toledo, OH, to the plant in Belvidere, IL, where the Compass and Patriot are built; the same plant was also home to the recently discontinued Dodge Dart. With Cherokee production gone, the Toledo plant in turn is being retooled to increase Wrangler output by 50 percent, including temporary parallel production of both the new model and the existing one. Meanwhile the replacement for the Compatriots, as they're colloquially known together, is expected to debut this summer in Brazil. Production is slated to take place, both in Brazil and in Mexico, starting January 30, 2017, with production of the Compass and Patriot reportedly to continue in Belvidere until December 23 of this year. By that point, the Compass and Patriot will be a full decade old, having been introduced in 2006 as 2007 models. Along with the Dodge Journey, they're the last FCA products still based on the PM/MK platform shared with Mitsubishi. The Japanese automaker still produces several models on the version it calls GS, including the Outlander, Outlander Sport, and Lancer. Related Video: