2006 Jeep Liberty Sport Sport Utility 4-door 2.8l on 2040-cars

Auto blog

Jeep gives a trio of customs an encore showing at SEMA

While Jeep certainly had some new customs on display at this year's SEMA show, it wasn't afraid to recycle a few that people might have missed from earlier this year. The maker of many beloved off-roaders already displayed the Jeep Cherokee Dakar, Maximum Performance Wrangler and Wrangler Mojo at the 2014 Easter Safari, but they all made it to SEMA for an encore.
Based around the Trailhawk, the Cherokee Dakar (pictured above) imagines an even more off-road-capable version of the crossover. The concept wears a mix of Silver Steel Stain paint with Flame Red graphics and rides on 17-inch wheels wrapped in 33-inch BFGoodrich Mud Terrain tires. To back up the rugged look, the Dakar is fitted with rock rails and skid plates protecting the oil pan, front suspension, fuel tank and other underbody parts. It also sports prototype parts from Jeep Performance Parts, including a lift kit and fender flares.
The Wrangler is one of the paragons of off-roading, and as the name suggests, the Maximum Performance Wrangler concept is meant to be the ultimate example of what it can do. The custom features locking Dana 60 axles front and rear, a 4:1 Rock-Trac transfer case, prototype 4-inch lift kit and 37-inch Mud Terrain tires over beadlock wheels. To stay on the trails well into the night, a bar of LEDs is mounted above the windshield. And finally, the Mopar Blue exterior kind of makes the vehicle look like the world's toughest blueberry.

We test the latest Easter Jeep Safari off roaders in Moab

The Easter Jeep Safari began as a play for tourism: in 1967 the Moab Chamber of Commerce invited "the Jeeping community" to ride a single trail on the Saturday before Easter. The attendees were mostly members and friends of the Chamber of Commerce. Now, 52 years later, the nine-day Safari takes place on more than 40 trails and lures thousands of Jeepers, who put on one of the biggest and best modified Jeep shows in the world. Cue the designers at Jeep and Mopar, who mastermind new ideas every year for what a modified Jeep could look like, with inspiration from the experiences they have and the mods they see at the Safari. We flew to Moab to drive the seven newest concepts, and start the recap with the disappointments: The B-Ute and the 4-Speed, but only because we couldn't drive them. Before the day had properly begun, those two designer treats had tapped out. The Renegade – internally codenamed B Utility, hence the "B-Ute" name – always feels like The Little Engine that Could when placed next to its halo Wrangler brother. In addition to the cosmetic changes, designers put the arcane caption "Lt. Jenkins" above "FWD1337" (explanations of those two memes here and here). The B-Ute would have been nice to drive if for no other reason than shouting "Leeeroy Jenkins" all around the course. View 16 Photos We rued missing out on the 4-Speed. The blue wonder is the third of a conceptual trio called "The Lightweights," focused on nimble trail handling provided by weight savings. The first of the Lightweights, the 2011 Pork Chop concept, cut 900 pounds from a standard Wrangler Sport. The 2013 Stitch concept lopped 1,100 pounds. The 4 Speed omits 900 pounds. Jeep brought both earlier concepts, and they were revelations. The Stitch was a throwback to stripped-out Dukes-of-Hazard-style Jeep romping. Round vents at the edges of the instrument panel act as side mirrors, Fiat Abarth seats grip occupants, the lemon-hued bikini top sewn from a transparent welding curtain bathes the cockpit in yellow light. Daisy Duke drove a 1980 CJ-7 that had 87 horsepower to move 2,700 pounds. The Stitch weighs about 3,200 pounds, but gets 290 hp. The Stitch skimmed over rocks and floated over sand, so light on its feet that Jeep lead designer Mark Allen told us the 35-inch Mickey Thompson MTZ tires were inflated to a mere 3 psi. The 4-Speed concept's pretty close to the Stitch weight thanks to carbon bits and lighter four-cylinder engine.

Fiat Chrysler CEO says final merger talks with Peugeot going well

BRUSSELS — Fiat Chrysler's chief executive Michael Manley said on Wednesday that merger talks with Peugeot owner PSA  to create the world's No. 4 carmaker are progressing well and he hopes to have a deal within 12-14 months. Speaking to Reuters on the sidelines of an industry meeting, he said he doesn't expect any major obstacles that could delay a final agreement. "Talks are progressing really well," Manley said about negotiations with the French carmaker ahead of a briefing by the European automotive association (ACEA), of which he is president. His comments come a month after the two carmakers agreed to a binding deal worth about $50 billion to combine forces in response to a slowdown in global demand and mounting costs of making cleaner vehicles amid tighter emissions regulations. Manley's timeline for completing the deal by early 2021 is in line with a forecast made by the companies in December. Fiat and Peugeot are now getting into the details of how the merger will work, including choosing which vehicle platforms — the technological underpinnings of a vehicle — will fit which products in a combined company. Because customers in different locations still prefer vastly different cars, there is room for multiple platforms in a combined group, Manley said. "That global platform is an elusive beast," he added. "This concept of a massive global platform in my mind is almost a myth, but that doesnÂ’t mean to say weÂ’re not going to recruit significant volume." Related Video: