2005 Jeep Liberty Sport on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Marchionne defends FCA recalls, says Wrangler won't be all-aluminum

FCA CEO Sergio Marchionne recently received the 2015 Industry Leadership Award from the SAE Foundation. While speaking with the press after the event, the boss discussed his thoughts about some key issues regarding the company's future. One of the big regulatory issues facing FCA at the moment is the upcoming public hearing by the National Highway Traffic Safety into the automaker's handling of 20 recalls. Marchionne has no intention of testifying there, according to The Detroit News. The CEO also thinks that the government regulator is becoming much more aggressive in how it handles safety campaigns, but the Feds aren't necessarily doing a very good job of communicating that. "We need to work with the agency in a very cooperative and open way to make sure that we can meet their requirements for their new stance," he said, according to the newspaper. "We have no option but to comply with their requirements and we will. I have nothing to hide in this process. I just want clear rules." Marchionne also dropped the news that the company has changed its mind about making the next Jeep Wrangler totally from aluminum. "Because of the difference in cost, not just the new material but the actual assembly process, I think we can do almost as well without doing it all-aluminum," he said to The Detroit News. This seemingly opens the door for the model to remain in production in Toledo, OH, but only just a crack. Marchionne says that the new Wrangler would still use a large amount of aluminum, and there are "at least" two sites in contention for the assembly. The company doesn't have too long to make a decision because the model reportedly launches in 2017.

Ford reveals the Mustang Cobra Jet, we drive the Chevy Silverado | Autoblog Podcast #550

On this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor Jeremy Korzeniewski and Associate Editor Joel Stocksdale. We discuss the just revealed 2018 Ford Mustang Cobra Jet drag car, along with our driving impressions of the 2019 Chevy Silverado and the 2018 Subaru BRZ tS. We also have a long discussion about the Jeep Wrangler Scrambler, Ford Ranger and small trucks in general.Autoblog Podcast #550 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown 2018 Ford Mustang Cobra Jet reveal 2019 Chevy Silverado first drive 2018 Subaru BRZ tS drive impressions Jeep Wrangler Scrambler off-road spy shots 2019 Ford Ranger configurations and small truck discussion Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: Podcasts Chevrolet Ford Jeep Subaru jeep wrangler pickup jeep scrambler subaru brz ts jeep wrangler scrambler