2005 Jeep Liberty Diesel Sport Sport Utility 4-door 2.8l Turbo on 2040-cars

Auto blog

Watch a Jeep CJ get disassembled and reassembled in minutes

Movie buffs! Remember the scene in the James Bond film 007: The Living Daylights where Timothy Dalton's character slices the floorpan off a police Lada using a laser, and when the driver hits the brakes the Lada's body simply jumps off its axles? That scene was immediately brought to mind as I watched this clip of eight Canadian mechanics disassembling a slightly modified Jeep in a matter of seconds. Having driven the Jeep to a complete stop, the technicians start unbolting it until the body lifts off the frame and the engine can be hauled away. It only took half a minute to turn the Jeep into just a chassis on wheels. As repair manuals say, refitting is the reversal of removal. Apparently the technicians have now honed their mechanical choreography to the point that the Jeep can be disassembled and reassembled in two minutes and 39 seconds; while I expect a great number of bolts having been removed beforehand and the likelihood of the Jeep falling to pieces with a sharp braking being significant, it is definitely impressive. It also reminds me of someone driving an old, dodgy car, having learned all its kinks to be able to keep it running. According to a Reddit thread, the pre-modified "Jifty Jeep" has been built (and taken apart, and rebuilt) by the School of Royal Canadian Electrical and Mechanical Engineers (RCEME) for exactly this purpose. The team travels all around Canada to practice their show, trying to shave seconds off their record. There are worse hobbies.

Stellantis tells UK: Change Brexit deal or watch car plants close

LONDON - British car plants will close with the loss of thousands of jobs unless the Brexit deal is swiftly renegotiated, Stellantis has told the UK parliament, the latest in a series of warnings from the industry since the country left the European Union. The world's No. 3 carmaker by sales and owner of 14 brands including Vauxhall, Peugeot, Citroen and Fiat said that under the current deal it would face tariffs when exporting electric vans to Europe from next year, when tougher post-Brexit rules come into force. "If the cost of EV (electric vehicle) manufacturing in the UK becomes uncompetitive and unsustainable, operations will close," Stellantis said in a submission to a House of Commons committee examining the prospects for Britain's EV industry. Stellantis urged the government to reach an agreement with the European Union about extending the current rules on the sourcing of parts until 2027 instead of the planned 2024 change. In response, a government spokesperson said the business secretary had raised the issue with the EU. "Watch this space, because we are very focused on making sure that the UK gets EV and manufacturing capacity," Britain's finance minister Jeremy Hunt said on Wednesday at a British Chambers of Commerce event. The potentially existential problem facing Britain's car industry is closely tied to the shift to EVs. Under the trade deal agreed when Britain left the bloc, 45% of the value of an EV being sold in the European Union must come from Britain or the EU from 2024 to avoid tariffs. The problem is that a battery pack can account for up to half a new EV's cost. Batteries are also heavy and expensive to move long distances. Experts have been warning since Britain left the EU at the end of 2020 that the country would need a number of EV battery gigafactories or potentially lose a hefty chunk of its car industry. Only Japan's Nissan has a small EV battery plant in Sunderland, with a second one on the way. Cost of failure Britishvolt, a startup which received UK government support for an ambitious 3.8 billion pound ($4.80 billion) battery plant at a site in northern England, filed for administration in January after struggling to raise funds. The company was then bought by Australia's Recharge Industries, which has yet to unveil plans for the site.

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.