on 2040-cars

Auto blog

Jeep Wrangler 4xe's hybrid powertrain: Could it be headed to other FCA products?

On its own, the 2021 Jeep Wrangler 4xe plug-in hybrid is a big deal for the brand and the model line. It's the most powerful and most efficient Wrangler by significant margins, and it doesn't give up the off-road capability that makes the Wrangler so special. But another great thing about this hybrid powertrain is its potential to be transplanted into other FCA vehicles. Just to recap, the layout of the Wrangler's hybrid powertrain, front to back, is as follows: engine, clutch, electric motor, clutch, transmission. The engine is the same 2.0-liter turbocharged four-cylinder that's a standalone engine for the Wrangler. The transmission and electric motor are sort of one unit, with the motor and clutch replacing the torque converter of the transmission. And the transmission itself is the ubiquitous eight-speed ZF automatic gearbox. Its transmission code name is 8HP75PH. The ZF eight-speed is available in every FCA product with a longitudinally-mounted engine and rear-wheel drive or four-wheel drive, with variations in the amount of power and torque it can handle. Not only that, but the Ram 1500 and 2500 and the Jeep Wrangler and Gladiator all have powertrains that utilize the non-hybrid version of the 8HP75 transmission specifically. Even the gear ratios for that transmission as well as the 8HP70 used in the Jeep Grand Cherokee, Dodge Durango, Dodge Charger and Chrysler 300 are nearly identical to those in the 8HP75PH. And a Fiat-Chrysler representative confirmed that the transmission portion of the hybrid drivetrain is basically carry-over from the regular 8HP75. So a transplant could be a relatively simple process. As for which of these models would be the most likely to receive the hybrid powertrain first, the Jeep Gladiator and Ram 1500 would seem like good bets, since they likely have the most similar transmissions, and the Gladiator in particular because of its closely-related underpinnings to the Wrangler. Both are also highly profitable trucks that sell well and could justify the development costs of adapting another powertrain. And in the case of the Ram, there's the impending F-150 hybrid to think about. Although Ram isn't going after a fully electric model, a PHEV could be a nice middle ground. A potential limiting factor would be whether the hybrid powertrain would be sufficiently robust to handle heavy payload and towing demands, particularly over longer periods.

Jeep readying 2018 and 2019 Wrangler recall for bad frame welds

According to documents posted to the JL Wrangler Forums, Jeep is readying a recall for an unknown number of 2018 and 2019 model-year Wrangler SUVs. The issue revolves around the track bar mount, which on some vehicles is shearing off where it is welded to the frame. Since some affected vehicles may be unsold on dealer lots, the automaker has issued a corresponding stop sale. A Jeep spokesperson confirmed to CNET that there have been no reported accidents related to the issue, and Jalopnik reports that Jeep will inspect roughly 18,000 vehicles for the defect, though it believes only around 720 will be affected. As of the time this story was published, the National Highway Traffic Safety Administration had not yet posted this recall to its website. There have been a total of five recalls for the 2018 Jeep Wrangler, including one for a steering shaft that could separate due to improper welding. One 2018 Jeep Wrangler owner in North Carolina posted a video to YouTube, seen above, showing track bar mounts that have completely sheared away from the vehicle's frame. These broken welds may cause severe steering degradation and "can cause a vehicle crash without prior warning," according to a dealer notice that was posted to the JL Wrangler Forum. That owner has said Jeep is replacing his Wrangler, but it's not clear if other vehicles are being replaced or repaired. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2019 Jeep Cherokee reveals a much more normal face

Since we started seeing redesigned Jeep Cherokee prototypes, we've suspected that the crossover would lose its controversial split headlights and pointy grille. Finally, we get a good look at a mostly uncovered test car, and it confirms that the new Cherokee will look quite conventional. The obvious change is the headlights. Instead of the slender daytime running lights at the top next to the grille, and the actual illuminating headlights lower in the bumper, all of the elements are integrated into single housings on either side. They're somewhat rectangular now, looking more like those on the Compass and the Grand Cherokee. But you can still see the same hockey-stick shaped LED running light design in the new lamps. The grille has changed, too. It looks much more blunt than the sharply creased, almost pointy grille of the current model. It also looks as though it may extend farther down than the current version. The rest of the Cherokee is very similar to the current model. The flanks are virtually unchanged, as is the interior, and the tail sees only minor changes. The most significant is the move of the license plate from the bumper to the hatch. The taillights' shape hasn't really changed, but the white section is now broken up by black lines, and the red element looks darker. We expect to see the Cherokee refresh soon, possibly by the end of the year. Related Video: