Srt8 6.1l Multi-function Steering Wheel Am/fm Radio Mp3 Player Multi Cd Player on 2040-cars

Auto blog

Watch a Jeep CJ get disassembled and reassembled in minutes

Movie buffs! Remember the scene in the James Bond film 007: The Living Daylights where Timothy Dalton's character slices the floorpan off a police Lada using a laser, and when the driver hits the brakes the Lada's body simply jumps off its axles? That scene was immediately brought to mind as I watched this clip of eight Canadian mechanics disassembling a slightly modified Jeep in a matter of seconds. Having driven the Jeep to a complete stop, the technicians start unbolting it until the body lifts off the frame and the engine can be hauled away. It only took half a minute to turn the Jeep into just a chassis on wheels. As repair manuals say, refitting is the reversal of removal. Apparently the technicians have now honed their mechanical choreography to the point that the Jeep can be disassembled and reassembled in two minutes and 39 seconds; while I expect a great number of bolts having been removed beforehand and the likelihood of the Jeep falling to pieces with a sharp braking being significant, it is definitely impressive. It also reminds me of someone driving an old, dodgy car, having learned all its kinks to be able to keep it running. According to a Reddit thread, the pre-modified "Jifty Jeep" has been built (and taken apart, and rebuilt) by the School of Royal Canadian Electrical and Mechanical Engineers (RCEME) for exactly this purpose. The team travels all around Canada to practice their show, trying to shave seconds off their record. There are worse hobbies.

FCA joining virtual CES with in-depth tours and Jeep Wrangler 4xe in AR

CES is sort of, technically happening, but it won’t be the CES weÂ’ve all become accustomed to over the years. Automakers will be doing their best to participate virtually, assuming they decide to join in the festivities at all. FCA is one that will have a little nugget of tech to share with us. A few main experiences will be made available to anybody with a computer. FCAÂ’s main draw is meant to be “highly detailed interactive product tours” where you can get to know a number of vehicles in a virtual world and hear from a “virtual brand ambassador” throughout the tour. You wonÂ’t be able to sit in and crawl through the cars like a normal auto show for the public, but FCA is promising a rather immersive experience online. The guided tour through the cars and technologies will be available in 12 FCA vehicles, two of those being the new Jeep Grand Wagoneer Concept and Alfa Romeo Stelvio Quadrifoglio. FCA plans to offer in-depth talks about how it tests vehicles, too. There are demonstrations planned for wind tunnels, the four-post shaker, an advanced drive simulator and general performance testing. Additionally, FCA plans on providing more insight into Uconnect 5 and vehicle electrification systems. WeÂ’re guessing the latter will offer up details on the Wrangler 4xe. The plug-in hybrid Wrangler will also be the star of FCAÂ’s AR play at CES. Everybody will be able to scan a QR code on FCAÂ’s site, then have access to a Wrangler 4xe on their phone. YouÂ’ll be able to “put it” in your driveway virtually, change the colors and get up close and personal with the interior.  All of this will launch on fcaces2021.com at 9 a.m. ET on January 11 (official first day of the virtual CES show), so surf on over there next week if you want to check it out. Related video:

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums