Grand Cherokee Overland 4wd 4x4, Nav, B/u Camera, Htd-a/c Seats, Clean!!!! on 2040-cars

Auto blog

FCA recalling 63k Jeeps, Vipers and Ram ProMaster City vans

Fiat Chrysler Automobiles has announced a pair of recalls cover nearly 63,000 vehicles. The bigger of the two actions covers manual-transmission-equipped vehicles from 2006, including the Jeep Liberty and Wrangler, as well as the Dodge Viper. FCA engineers uncovered that the clutch ignition interlock switches use a kind of wire that was part of a previous recall campaign. Because of this, the company said that affected vehicles may not start, although in rare cases, "if recommended starting procedures are not followed," the affected vehicles may lurch forward after turning the key. Those recommended starting procedures "include activating the parking brake, placing the shift lever in neutral and pressing the clutch pedal before turning the vehicle's ignition key." Recall number two affects the company's 2015 Ram ProMaster City cargo and passenger vans. Owners will need to report to dealers to have a piece of tape removed from the side-curtain airbags. The tape is added during assembly and in some cases, may not have been removed. That could prevent the airbags from deploying in the event of a crash. Just under 59,000 vehicles are included in the first recall, including 43,874 in the United States, 11,309 outside of North America, 2,944 in Canada and 706 in Mexico. The ProMaster City recall includes just over 3,900 vehicles. FCA claims it's unaware of any injuries, fatalities or accidents related to either recall and will perform repairs free of charge. Scroll down for the official press release on both campaigns. Related Video: Statement: Clutch Ignition Interlock Switch April 23, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary recall of an estimated 43,874 older-model U.S.-market cars and SUVs equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. The action follows an investigation by FCA US engineers that discovered these vehicles are equipped with switches that contain a certain type of wire implicated in a previous campaign. The wire, which was temporarily substituted by a supplier for the specified material, may break. As a result, the vehicles may not start, and in rare cases – if recommended starting procedures are not followed – a vehicle may exhibit unintended movement when its ignition key is turned. FCA US is unaware of aware of any related injuries or accidents involving this population of vehicles.

2018 Jeep Wrangler to get 8-speed auto

Remember when the Jeep Wrangler had a three-speed automatic? That wasn't that long ago – as recent as the 2007 redesign – but Chrysler is keen to leave those days behind on the dusty trail. The current model ushered in a four-speed, then a five-speed, but the latest intel indicates that an eight-speed automatic is in the cards. According to a report filed with the Securities and Exchange Commission, and cited by Automotive News, Jeep plans on fitting its eight-speed automatic transmission to the next-generation Wrangler. Chrysler already uses the ZF-sourced slushbox on the Jeep Grand Cherokee, Ram 1500, Chrysler 300, and versions of the Dodge Challenger, Charger and Durango. But according to the SEC filing, the Auburn Hills automaker intends "to use this transmission in all of our rear-wheel-drive vehicles, except for heavy-duty versions of the Ram pick-up truck and the SRT Viper." AN says that Chrysler wanted to slot the transmission straight into the current Wrangler, but it wouldn't fit. Between the transmission and shift to aluminum construction, the next-generation Wrangler promises to deliver a significant reduction in fuel consumption. In correspondence with Autoblog, however, company spokesmen declined to comment on the eight-speed's suitability towards either the current Wrangler or the upcoming one.

Jeep Wrangler plug-in hybrid confirmed for 2020

The Jeep Wrangler will get a plug-in hybrid electric model in 2020, brand head Mike Manley confirmed this week at the Los Angeles Auto Show in a move he says is "future proofing" the legendary off-roader. "A full plug-in electric Jeep Wrangler will be available in 2020, furthering our commitment to all those who value the responsible, sustainable enjoyment of the great outdoors and very importantly, future proofing this Wrangler for generations to come," he said after the reveal of the 2018 model. It was reminiscent of a Steve Jobs 'One More Thing' moment from an Apple event. Manley explained the details of the new Wrangler, codenamed JL, and then dropped the EV nugget near the end of the press conference in Los Angeles. He didn't offer up further details like range or power. The plug-in hybrid will join a now-expansive powertrain lineup for new generation of the Wrangler. Jeep will offer a mild hybrid next year with its 2.0-liter turbo four-cylinder engine. Called eTorque, the hybrid adds regeneration, stop-start and electric power assist. This system makes 270 horsepower and 295 pound-feet of torque. In 2019, the Wrangler will get a 3.0-liter V6 EcoDiesel engine rated at 260 hp and 442 lb-ft. The tried-and-true Pentastar V6 with 285 hp and 260 lb-ft also continues. In an exclusive interview with Autoblog in January, Manley previewed the Wrangler's electric plans at the Detroit Auto Show. "The hybridization could actually help Wrangler," he said, noting it could improve torque distribution, a critical element for four-wheel drive vehicles." He added, "Electrification, absolutely. I could see Wrangler being a form of electric." The 2018 Wrangler goes on sale in January featuring a raft of improvements. It is about 200 pounds lighter thanks to the use of aluminum. There are also new engines, updated styling features and a nicer interior. Related Video: Featured Gallery 2018 Jeep Wrangler Rubicon View 80 Photos Green LA Auto Show Jeep SUV Off-Road Vehicles confirmed 2017 LA Auto Show