99 Jeep Grand Cherokee on 2040-cars

Auto blog

Chrysler recalling 31k SUVs and vans

Chrysler is issuing recalls covering roughly 31,700 vehicles worldwide due to two separate problems. In both cases the company believes that most of the affected vehicles are either still on, or in transit to, dealer lots.
One recall covers roughly 10,700 Dodge Durango, Jeep Cherokee, Grand Cherokee and Grand Cherokee SRT models from the 2014 model year built between January 16 and April 17, 2014. The SUVs need a software update for the cruise control. It's possible that when the cruise is on and the driver presses on the throttle, the acceleration could last a second after the pedal is released or two seconds for the SRT. Afterward, they return to the speed originally set by the driver.
Chrysler says it isn't aware of any accidents, injuries or even reported incidents of this happening in the real world. Also, in all cases, if the driver presses on the brake, the cruise shuts off. The automaker believes that there are about 6,100 affected SUVs in the US, 950 in Canada, 425 in Mexico and 3,200 outside of North America. The software upgrade will be ready shortly, the company says.

Jeep Grand One and Quicksand Concepts lead the charge to Moab

Jeep's past, present, and future all share equal billing at the 51st annual Easter Jeep Safari in Moab. We're suckers for vintage Jeeps, so the all-new Grand One Concept really stands out among the seven vehicles that make up Jeep's conceptual take on the off-road event. It's based on a 1993 Grand Cherokee in a slightly early celebration of the model's 25th anniversary. Exterior mods include custom fender flares for clearance over 18-inch wheels and 33-inch BFGoodrich Mud-Terrain KM2 tires, trimmed front and rear fascias and what FCA is calling a "subtle wood grain" splashed on the vehicle's bodysides. An extended wheelbase ought to offer a bit more room inside, and a two-inch suspension lift will help when the going gets tough. No alterations are mentioned to the vehicle's 5.2-liter V8 or 4-speed automatic transmission. The second most interesting concept for Moab is the Jeep Quicksand. It's clearly Wrangler-based, but instead of a traditional rock-climbing focus, this one's built for the sand dunes. Power comes from a worked-over Mopar 392 Crate HEMI engine topped with an eight-stack fuel injection system that peeks through the hood. A six-speed manual sends the ponies to all four wheels, but with a unique twist: 32-inch BFGs in the front and 37s in the rear in what Jeep says is its first application of staggered tire sizes on a concept vehicle. A Warn winch concealed in a vintage-style Moon tank at the front is the finishing touch. The Jeep Safari Concept is all about letting the outdoors in while keeping the elements out. A translucent hardtop and four aluminum and clear vinyl doors are the most obvious changes from stock, and two rear seats have been angled outward so that their occupants get a better view outside. Dana 44 axles and a two-inch suspension lift come from the Mopar parts catalog, but the roof-rack-mounted drone and dash-mounted iPad are custom one-off touches. Power comes from a stock 3.6-liter V6 and five-speed automatic transmission. Perhaps more intriguing than all the custom bits and baubles, though, are what appears to be next-gen Wrangler bodywork. Take a look at the kinked grille, the outer slats of which are pinched by the headlights, and the shape of the rocker panel between the front and rear door. No, this isn't exactly a 2018 Wrangler hiding in plain sight, but it's certainly a nod toward the future. Jeep's Switchback Concept looks to be a rolling Mopar parts catalog.

Your 2018 Jeep Wrangler can already be fitted with a Chevy LS V8

Over a long enough period of time, every car model on the planet will probably have at least one example receive a Chevrolet V8. And a large number of them will have an LS-series V8, commonly found in Corvettes and Camaros from the last 20 years (plus other GM vehicles in slightly different forms). Sometimes it doesn't take very long, as is the case with the 2018 Jeep Wrangler JL. The new Jeep has only been available for a couple of months, and already a company called Bruiser Conversions is offering to install LS engines under the hood. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Specifically, the company will install a GM Performance LS3 V8. Though Bruiser Conversions doesn't yet list exactly what specifications the engine has, it offers the LS3 in both 450- and 500-horsepower versions on the previous Wrangler JK generation. The new V8 will be fitted to the factory 8-speed automatic transmission, and the company says that the transmission will function exactly as it does with the original V6 or turbo inline-4. In addition, Bruiser Conversions says all factory gauges, cruise control, hill descent control and other electronic aids will work like they did from the factory. Pricing is currently not listed for the conversion, but the company is taking pre-orders for both in-shop installations and do-it-yourself kits. Going off the conversion costs for an older JK Wrangler, it will probably cost between $20,000 and $30,000 to have Bruiser Conversions do the installation. In the case of the JK kits, they're about $5,000 less than having Bruiser Conversions do the work. We've reached out to the company to see if we can get specific pricing and will update the post if and when we hear back. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Bruiser ConversionsImage Credit: Bruiser Conversions Aftermarket GM Jeep SUV Off-Road Vehicles Performance ls3