2019 Jeep Grand Cherokee Altitude on 2040-cars

Auto blog

2016 Jeep Wrangler recalled over impact sensor wiring

Fiat Chrysler just announced a pair of recalls totaling nearly 311,000 units. The bigger recall affects certain 2016 and 2017 model year Jeep Wranglers. Although, since FCA claims all of the affected 2017s are in the company's hands, really, only 2016 owners should pay attention here. The affected Wranglers suffer from an issue where wiring disconnects from impact sensors in certain types of crashes, potentially preventing the airbags and pretensioners from activating. FCA uncovered the problem in what its press release calls "a routine, in-house crash test" and claims "service availability is imminent." The affected Jeeps require a simple rewiring. The other recall, announced Tuesday, is more of a fleet issue, affecting 2007 to 2013 model-year Ram 2500 and 3500 pickups and 3500, 4500, and 5500 chassis cabs and 2011 to 2014 Dodge Charger Pursuit police vehicles. There's a problem with "premature diode wear" in alternators that are subject to "frequent load cycling, at or near maximum amperage, [or] in hot ambient temperatures." Affected alternators could short out, causing a vehicle to stall or potentially catch fire. FCA lists 182,743 affected Wranglers in the US, 18,011 in Canada, 3,087 in Mexico, and 20,948 in global markets. The Ram/ Charger Pursuit recall lists 74,833 vehicles in the US, 10,077 in Canada, 1,088 in Mexico, and 134 outside the NAFTA region. Of all those vehicles, the Jeep recall hasn't caused any injuries or fatalities, while FCA says it's aware of one "potentially related injury" and no accidents due to its fleet vehicle recall. FCA says it will notify owners/operators of affected vehicles when service appointments are available. As per usual, all the work is free of charge. Related Video:

Prosecutors indict three FCA employees in alleged emissions-cheating case

Federal prosecutors indicted three Fiat Chrysler Automobiles (FCA, now Stellantis) employees as part of an investigation into alleged emissions cheating. Charges unsealed on April 20, 2021, accuse the defendants of helping rig the emissions control system fitted to the 3.0-liter turbodiesel V6 used in some models during the 2010s. Prosecutors claim Emanuele Palma, Sergio Pasini, and Gianluca Sabbioni played a determining role in developing a defeat device that allowed the V6 to obtain certification from the Environmental Protection Agency (EPA) while polluting too much in normal driving conditions. Jeep and Ram began making the engine available in the Grand Cherokee and the 1500, respectively, in 2014, but the charges state plans to game the EPA started in 2011. Palma, Pasini, and Sabbioni knowingly mislead federal regulators, the charges claim; they called it "cycle beating," according to The Detroit News. While the three men were part of FCA's research and development department, they started the project while working for an Italian supplier named VM Motori, which FCA purchased in 2013. Pasini and Sabbioni are each charged with one count of conspiracy to defraud the United States and to violate the Clean Air Act, one count of conspiracy to commit wire fraud, and six counts of violating the Clean Air Act. They could spend several years behind bars if they're found guilty. Both are currently in their home country of Italy. Palma's legal troubles are more serious. He was charged with several counts in September 2019, though four wire fraud charges were dropped in November 2020. He lives in Bloomfield Hills, a city located on the far outskirts of Detroit. Prosecutors claim motorists spent over $4 billion on over 100,000 trucks and SUVs fitted with the non-compliant engine between January 2013 and September 2017. FCA has already agreed to pay $800 million to resolve civil claims from the Justice Department, state officials and customers, though it significantly has not admitted guilt. It stressed that "it did not engage in any deliberate scheme to install defeat devices to cheat emissions tests."

2018 Jeep Wrangler will keep classic hood style

One of our spy photographers caught some FCA employees poking around under the hood of a 2018 Jeep Wrangler prototype. They had the hood open wide, and because of that, we can catch a couple little details that tell us a bit more about the exterior styling of the Wrangler. Mainly that some of the Wrangler's signature hood details will remain for the new generation. The first details we caught were the bolt holes in the hood at the base near the hinges. These show that, as with the previous model of Wrangler, the 2018 model will feature chunky, rugged-looking external hood hinges. We can also infer that if these hinges remain, the doors will likely have matching ones, and those will hopefully still be removable. The second details we spotted were a bit more subtle. On the sides of the hood towards the leading edge, there are some indentations. Based on the positioning, and their small size, we believe these are the indentations for external tie-down latches for the hood, just like the old model. Actually, just like pretty much every Wrangler-style Jeep back to the military models used in World War II. Based on a report last week from JL Wrangler Forums, we are expecting to see the fully revealed 2018 Jeep Wrangler and its classic hood details at this year's LA auto show. It is then expected to arrive at dealers in December with both V6 and four-cylinder engine offerings. Related Video: Featured Gallery 2018 Jeep Wrangler Hood Spy Shots Image Credit: KGP Photography Spy Photos Jeep SUV Off-Road Vehicles