2012 Jeep Grand Cherokee Srt8 Sport Utility 4-door 6.4l on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Jeep bringing Renegade Hard Steel with adorable matching trailer to Geneva

Trailers are hardly an uncommon site. They can, after all, be an effective way of adding cargo capacity when you need to haul more than you can fit in your car and truck. But there's something that just gets us about trailers made to match the vehicle behind which they're being towed. Like this one, attached to this unique Jeep Renegade. Set to be unveiled at the Geneva Motor Show mere days from now, the Renegade Hard Steel concept is a joint effort between various elements of the Fiat Chrysler Automobiles group, including Jeep, Mopar and the FCA Style Centre. It's based on the Trailhawk off-road model, but is distinguished by its unique metallic finish, offset by matte black trim and a full raft of available and custom Mopar accessories. Though Jeep has yet to show us what it looks like inside, it's said to have a specially coated leather finish. And of course there's that trailer. Designed to mimic the Renegade's rear-end styling, the appendage will be used on the floor of the Geneva Palexpo to showcase the vehicle's Uconnect Live infotainment system through an oversized pop-up touchscreen display that mirrors the new 5- or 6.5-inch display that'll soon be available on the littlest of Jeeps, offering streaming content including music, news, social media and traffic conditions. We have no indication that a similar trailer could be going into production (minus, of course, the infotainment stuff), but it's worth noting that Jeep has indeed done something similar before. Feel free to read more in the press release, below. Related Video: 27 February 2015 Renegade Hard Steel Jeep Showcar The Renegade Hard Steel Jeep showcar, which blends style, off-road vocation, and technology, will be making its debut and the 2015 Geneva International Motor Show. Created by the Jeep brand, in collaboration with the Mopar brand and backed by the FCA Style Centre, the showcar "explores" the potential of a model that provides countless customization options, while also providing an outlook for potential future Mopar accessories dedicated to the new Renegade. Based on the Trailhawk - the off-road version of the range - the prototype is not a simple customisation in aftermarket but a design project that, with due respect to the peculiarities of original models, has led us to the creation of a unique and fascinating article.

Fiat Chrysler picks Google, Samsung for global connected car system

DETROIT — Fiat Chrysler said on Tuesday it will use technology from Alphabet Inc's Google and Samsung to connect all its vehicles by 2022, providing music and video and facilitating future car-sharing and self-driving capabilities. Fiat Chrysler Automobiles NV (FCA) will use Google's Android operating system globally instead of a mixture of software that varies by region, a spokesman said. The automaker will also use a cloud-based digital platform from Samsung Electronics Co Ltd's Harman unit. Unlike its rivals General Motors and Ford, FCA has spent virtually nothing on developing self-driving vehicle technology. This saves the company large amounts of money, but makes it reliant on outside parties to provide technology and systems. FCA said it will launch the new capabilities in the second half of 2019. The company said the system will aid owners "by predicting maintenance needs, locating fuel and charging stations, receiving traffic prompts and restaurant offers and providing live customer-care assistance at the push of the button." Chrysler Dodge Fiat Jeep RAM Technology Emerging Technologies connected car