2005 Jeep Grand Cherokee Limited Sport Utility 4-door 5.7l on 2040-cars

Auto blog

Jeep Cherokee Trail Carver is a more rugged Trailhawk

We briefly mentioned the Jeep Cherokee Trail Carver that was heading to SEMA last week when discussing the Mopar lineup set to be shown in Las Vegas. At the time, though, we weren't able to dive too deeply into details. But with SEMA in full swing, we were able to sneak over and grab some snaps of one of the first modified Cherokees we've seen. The Cherokee is, after all, kind of an unknown quantity in the modification department, being so new and featuring such a polarizing design. We were quite interested to see what Mopar could come up with.
Starting with the Trailhawk 4x4 and its 3.2-liter V6, the engine is fitted with a Mopar cold-air intake and a new exhaust, although it's not clear what sort of power boost has resulted. We'll admit, we were hoping Jeep and Mopar would get a bit more aggressive with the Cherokee's suspension (has anyone thrown a few-inch lift on the new Jeep yet?), but there's no mention of upgrades beyond the knobby, off-road tires. Those should do some good when the going gets rough, while rock rails are there to protect the Auburn Pearl paint on the body.
Speaking of that paint, it's complemented by an interesting graphics package in contrasting black and Crush Orange. The cabin sports Katzkin Amaretto leather seats, along with tech-friendly items like a wireless charging system for cellphones and wireless internet.

Fiat Chrysler dumped 40,000 unordered vehicles on dealers

In a move that echoes recent history, Fiat Chrysler has been making more cars and trucks than dealers in the U.S. are willing to accept, with Bloomberg reporting that at one point the automaker had built up a glut of around 40,000 unordered vehicles. That’s led some dealers to accuse FCA of reviving the dreaded “sales bank” accounting practice of obscuring inventory to improve the balance sheet. The company reportedly began building up its inventory of unordered cars this summer despite an industrywide slowdown in sales and an eagerness by some dealers to thin their inventories because rising interest rates are making it more expensive to hold unsold cars. The inventory build-up also coincided with Fiat ChryslerÂ’s efforts to find a merger partner, first with Renault, which fell through, then last monthÂ’s announcement that it will merge with FranceÂ’s PSA Group. FCA denies any such scheme and tells Bloomberg the rising inventory is down to a new predictive analytics system designed to better square supply with demand from dealers that is helping the company save money and narrow the numbers of unsold vehicles. The company recently agreed to pay a $40 million civil penalty to the U.S. Securities and Exchange Commission to settle a complaint that it paid dealers to report fake sales figures over a span of five years. While no one is suggesting that FCA is in dire financial straits — the company saw higher than expected earnings in the third quarter and record profits in North America — the practice has strong historical precedent by Chrysler, which built up bloated inventories in the run-up to its two federal bailouts, in 1980 and 2009. It was also common at GM and Ford during the 2000s, when all three Detroit automakers struggled with excess manufacturing capacity and plummeting sales in the lead-up to the Great Recession. Back in 2012, CFO Magazine wrote about a report that explained automakersÂ’ rationale for the practice and how it works: Say fixed costs for a given factory are $100, and that the factory can make 50 cars. Consumers, however, demand only 10. Under absorption costing, if the company makes all 50 cars, its cost-per-car is $2. If it makes only up to demand, or 10 cars, the cost-per-car is $10. Although each car adds variable costs for steel and other parts, if those costs are low, the company still has an incentive to make more cars to keep the cost-per-car down.

Jeep Wrangler plug-in hybrid confirmed for 2020

The Jeep Wrangler will get a plug-in hybrid electric model in 2020, brand head Mike Manley confirmed this week at the Los Angeles Auto Show in a move he says is "future proofing" the legendary off-roader. "A full plug-in electric Jeep Wrangler will be available in 2020, furthering our commitment to all those who value the responsible, sustainable enjoyment of the great outdoors and very importantly, future proofing this Wrangler for generations to come," he said after the reveal of the 2018 model. It was reminiscent of a Steve Jobs 'One More Thing' moment from an Apple event. Manley explained the details of the new Wrangler, codenamed JL, and then dropped the EV nugget near the end of the press conference in Los Angeles. He didn't offer up further details like range or power. The plug-in hybrid will join a now-expansive powertrain lineup for new generation of the Wrangler. Jeep will offer a mild hybrid next year with its 2.0-liter turbo four-cylinder engine. Called eTorque, the hybrid adds regeneration, stop-start and electric power assist. This system makes 270 horsepower and 295 pound-feet of torque. In 2019, the Wrangler will get a 3.0-liter V6 EcoDiesel engine rated at 260 hp and 442 lb-ft. The tried-and-true Pentastar V6 with 285 hp and 260 lb-ft also continues. In an exclusive interview with Autoblog in January, Manley previewed the Wrangler's electric plans at the Detroit Auto Show. "The hybridization could actually help Wrangler," he said, noting it could improve torque distribution, a critical element for four-wheel drive vehicles." He added, "Electrification, absolutely. I could see Wrangler being a form of electric." The 2018 Wrangler goes on sale in January featuring a raft of improvements. It is about 200 pounds lighter thanks to the use of aluminum. There are also new engines, updated styling features and a nicer interior. Related Video: Featured Gallery 2018 Jeep Wrangler Rubicon View 80 Photos Green LA Auto Show Jeep SUV Off-Road Vehicles confirmed 2017 LA Auto Show