11 2011 Jeep Grand Cherokee Laredo Flex Fuel One Owner Extra Clean Suv on 2040-cars

Auto blog

2018 Jeep Wrangler might get power sliding roof panels

A user at JL Wrangler Forums snapped a few photos of a prototype 2018 Wrangler driving around, and one of the shots revealed some interesting switchgear. On the ceiling are a couple of handles that further confirm it will still have a multi-piece removable roof, something already expected when images of the truck leaked out. Just ahead of those handles is a binnacle of switches with no clear explanation for their existence. The folks at JL Wrangler Forums believe they have the answer. They suspect that the controls are for a Jeep Renegade-style My Sky roof. In case you forgot, the Renegade's My Sky roof is a cross between a sunroof and the Wrangler's removable roof. One of the panels can slide back like a sunroof, or it and a second panel can be pulled out entirely. The forum members believe the large center button and smaller buttons ahead of it are controls for sliding back either or both front roof panels. Of course the roof panels will still be removable, too. They also cite anonymous sources that say the forum's speculation is on the right track. A few years ago, rumors of a power top were circulating, too. We can certainly see this as a possibility. It would offer Wrangler owners the option of some open-air fun without requiring the unfastening of multiple latches and stowage of large roof panels. Although it would likely add plenty of cost, that won't be much of an issue for Jeep. It's already possible to spend remarkable amounts of money in heavily accessorized Wranglers, and Jeep doesn't have trouble getting them sold. We're still not completely convinced, though. It's also possible we could be looking at switchgear for overhead lights or other interior features, maybe even storage for sunglasses. We just can't be positive without getting a closer look at the switches. Also, there's at least one reason Jeep might want to avoid a feature like this. Power sliding top panels could add weight. Now Jeeps aren't amazing performers, save for the SRT and Trackhawk Grand Cherokees, so speed won't be an issue, but if the weight goes into the top panels, it could make top removal more difficult thanks to heavier components. We'll have to wait to find out for sure. Related Video:

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Here's why you shouldn't try to drift a Jeep Cherokee

This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. There are many reasons why an XJ-generation (or really any other) Jeep Cherokee doesn't make for a good drift machine. It's tall, it's four-wheel-drive... it's a Jeep, okay? But someone apparently forgot to tell that to this guy. Uploaded to LiveLeak, this video shows some poor schmuck who took his Cherokee to a (mostly) empty parking lot and tried to drift it. Needless to say, things didn't go quite as he planned, but they probably went exactly as you might have expected. Thankfully, nobody appears to have been hurt. Or at least, we assume so, since the guy apparently survived to put the video up online.