New 2014 Jeep Compass Sport on 2040-cars

Auto blog

2018 Jeep Wrangler production ending to make way for Jeep pickup

After more than a decade in production, the outgoing JK generation Jeep Wrangler is set to end production on April 7. According to Automotive News, parts supplier Hyundai Mobis North America notified the State of Ohio that production was ending. The Toledo, Ohio, plant where the Jeep is built is already deep into production of the replacement JL generation Wrangler. The big news isn't that JK production is ending but that the plant is retooling in order to get Wrangler pickup production underway. Details on the Wrangler pickup are scarce. Jeep hasn't said anything, so most of what we know comes from various spy shots. Basically, expect a JL Wrangler Unlimited with a bed. That's a good thing. We were quite smitten with the Wrangler when we drove it late last year. It's better equipped and more refined than ever. The Toledo plant has a capacity of about 300,000 units a year. FCA CEO Sergio Marchionne expects about 100,000 Wrangler pickups to be sold each year. When the Wrangler pickup arrives, look for a naturally aspirated V6 under the hood. The turbo inline-four is likely, though smaller volumes could limit the truck's engine choices. The upcoming turbo diesel is a possibility, too. Other details include suspension that takes a cue from Ram. Look for a full reveal in the next few months. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Weekly Recap For 7.8.16 | Autoblog Minute

Senior Editor Greg Migliore recaps the week in automotive news, including a look at the new V12 hypercar coming from Aston Martin and Red Bull Racing. Aston Martin Jeep Autoblog Minute Videos Original Video autos Red Bull Racing hypercar am-rb 001

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.