1971 Jeepster Commando Half Cab Rockcrawler Project on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Some Jeep Cherokees and Chrysler 200s to get standard stop-start in 2015

Automakers the world over are striving to find ways to make their models more efficient, and Chrysler has a solution for some versions of the 2015 Chrysler 200 and 2015 Jeep Cherokee (2014 model shown). The Tigershark 2.4-liter four-cylinder in the 200 and the 3.2-liter Pentastar V6 in the Cherokee are getting a slight boost later this year thanks to the addition of Chrysler's Engine Stop-Start system as standard equipment. The company predicts modest gains - a three-percent improvement in fuel economy and a three percent reduction in CO2 emissions with the new tech compared to without it. While it's not much, those who sit in traffic a lot may see a difference.
Chrysler's stop/start system uses a high-speed starter motor to restart the vehicle in a claimed a third of a second. It works by detecting when the vehicle comes to a stop and turning off the engine. A more powerful battery maintains all of the model's accessories while it sits. When the driver lets off the brake, the car starts up again to drive away. There is even a button in the cabin to turn the ESS off, if desired.
The Jeep will be the first to receive ESS in the third quarter of this year to coincide with the start of production of the 2015 model-year version. The 200 will follow in the fourth quarter as a rolling change in production.

FCA UConnect fiasco could set over-the-air updates back years

Since cars have become more software dependent, most major automakers have been inching toward enabling over-the-air updates to keep vehicle electronics, ranging from infotainment systems to safety features, current. But there are only two car companies — Fiat Chrysler and Ford —± currently doing OTA updates, and on a limited basis. GM CEO Mary Barra announced last summer that the automaker will launch a new EV architecture and infotainment system capable of over-the-air updates "before 2020." The one exception, per usual, is Tesla. Since the release of the Model S almost six years ago, the maverick EV automaker has made routine OTA software updates a core part of its vehicle platforms and value proposition, and has sent out updates for everything from adjusting ride height to enabling Autopilot, largely without incident. When I've asked automakers why they can't do the same thing, I've heard reasons ranging from running afoul of their dealers (and archiac regulation) to security concerns. Automakers like Ford and General Motors say they want to act like tech companies, which routinely send out OTA updates for a wide range of devices, but overall the car industry still moves at a very cautious snail's pace. And when automakers do try to move faster and take more risks — unlike with a smartphone update, which people bitch about but live with — the consequences can be significant when things go wrong. That's the case with Fiat Chrysler America and its recent public-relations nightmare when an OTA update went awry. The update went out at the end of last week for the Uconnect system in late-model vehicles, and it made head units go into a near continuous reboot, which caused owners to not only lose access to entertainment features, but also critical functions like emergency assistance. Almost immediately, owners took to Twitter to express outrage, and FCA was caught flatfooted. A tweet went out on Monday on the UconnectCares Twitter account that read, "Certain 2017 & 2018 Uconnect systems may experience a reboot every 45-60 seconds. Our Engineering teams are investigating the cause and working towards a resolution.