Awd 4x4 Power Windows Power Locks Alloy Wheels on 2040-cars

Auto blog

2018 Jeep Wrangler production ending to make way for Jeep pickup

After more than a decade in production, the outgoing JK generation Jeep Wrangler is set to end production on April 7. According to Automotive News, parts supplier Hyundai Mobis North America notified the State of Ohio that production was ending. The Toledo, Ohio, plant where the Jeep is built is already deep into production of the replacement JL generation Wrangler. The big news isn't that JK production is ending but that the plant is retooling in order to get Wrangler pickup production underway. Details on the Wrangler pickup are scarce. Jeep hasn't said anything, so most of what we know comes from various spy shots. Basically, expect a JL Wrangler Unlimited with a bed. That's a good thing. We were quite smitten with the Wrangler when we drove it late last year. It's better equipped and more refined than ever. The Toledo plant has a capacity of about 300,000 units a year. FCA CEO Sergio Marchionne expects about 100,000 Wrangler pickups to be sold each year. When the Wrangler pickup arrives, look for a naturally aspirated V6 under the hood. The turbo inline-four is likely, though smaller volumes could limit the truck's engine choices. The upcoming turbo diesel is a possibility, too. Other details include suspension that takes a cue from Ram. Look for a full reveal in the next few months. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

NHTSA investigating 630k Jeep Wranglers for possible airbag fault

The National Highway Traffic Safety Administration is opening a preliminary evaluation into a possible wiring problem on some 2007-2012 Jeep Wrangler models that could affect airbag deployment. The government agency has 221 complaints alleging that the airbag warning light is illuminating, and that could indicate that the safety devices might not deploy in a crash. If a recall is necessary, an estimated 630,000 vehicles could be affected. According to the documents from NHTSA (as a PDF here), a "faulty clockspring assembly in the driver side airbag electrical circuit" could be the culprit. Also, some of the affected Wranglers are showing a fault code that indicates the safety device wouldn't deploy in an accident. However at this time, there are no reports of injuries related to this potential problem. NHTSA's preliminary evaluations are simply meant to investigate and don't necessarily lead to a recall. This isn't the first time for a potential problem like this on the Wrangler, though. A clockspring issue already led to a safety campaign for 2008-2012 right-hand drive Wranglers and an extended warranty for 2007 left-hand drive examples. Related Video: INVESTIGATION Subject : Air Bag Clockspring Wiring Failure Date Investigation Opened: JUN 19, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15025 Component(s): AIR BAGS All Products Associated with this Investigation Vehicle Make Model Model Year(s) JEEP WRANGLER 2007-2012 JEEP WRANGLER 2-DR 4X4 2007-2009 JEEP WRANGLER 4-DR 4X2 2007-2009 JEEP WRANGLER 4-DR 4X4 2007-2009 JEEP WRANGLER SAHARA 2007 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: The subject vehicles display an airbag warning light that may indicate a failure of the clockspring wiring in the driver side air bag circuit. Several complaints cite the following diagnostic trouble code (DTC): Code B1B02 Open Squib to driver's air bag. This DTC would indicate a no-fire condition (disablement) for the driver air bag. ODI investigated the RHD (right hand drive) Wrangler for a clockspring issue under PE11-019 which led to NHTSA Recall 11V258 on model year (MY) 2008-2012 RHD Wranglers as well as an extended warranty campaign on MY 2007 LHD Wrangler vehicles. This investigation covers the MY07-12 LHD (left hand drive) Wranglers.

Build your own: 2017 Jeep Wrangler Willys Wheeler

While still three weeks from the start of summer, it arrived in practical terms with the Memorial Day weekend. And while the country will have worked through its collective hangover (from too much food, drink and shopping) and gotten back to work, it's worth remembering what – automotively – got us here, preserving both democracy and personal freedoms. The CJ-inspired Jeep Wrangler got us here, and in its Willys Wheeler guise the spirit of America rolls on. As the many spy pics have shown, FCA's Jeep division is working hard to replace its current Wrangler within the next few months. With that, we say goodbye to 10 model years of Wrangling with the current model. And that decade has been a good one for Jeep. Despite the economic downturn between 2008 and 2010, Jeep and Jeep Wrangler sales have been consistent bright spots for FCA, along with – of course – Ram trucks and, uh, Ram trucks. With a new Wrangler around the bend, it's worth taking a look at the existing model. And knowing an all-new example is coming, what would be the reason – if shopping – to consider what's on dealer lots now? Despite the numerous areas of improvement the new model will deliver (in efficiency, refinement and safety) , there's something to be said for a vehicle 10 years into its production cycle. While this is wholly anecdotal, for every step forward a manufacturer makes with a new vehicle, the added tech and necessary complexity seem to mandate two steps back. In an Audi A4, tech would seem a good thing, while in a Wrangler, this Jeep enthusiast would see it as a mixed blessing. Almost 80 years into its evolution (the initial Jeep concept came together in the summer of 1940) little has changed in the Jeep's essential mission. A body-on-frame architecture transports a driver and up to three passengers over paved and unpaved surfaces with credible confidence and a modicum of security. Live axles front and rear enhance the Wrangler's off-road capability, but compromise its on-road behavior. And while a significantly wider track mitigates rollovers, the Wrangler is decades removed from "state-of-the-art" when discussing safety or handling. Currently there's but one engine available in the States, a 3.6 liter normally-aspirated V6 producing 285 horsepower at a you'll-rarely-get-there 6,400 rpm. Connected to either a six-speed manual or ($1,400) five-speed automatic, the engine moves the 4,000-pound (loaded) Wrangler with measured confidence.