2007 Jeep Commander Overland, Loaded, 4x4. White W/ Tan Leather on 2040-cars

Auto blog

2016 Jeep Wrangler recalled over impact sensor wiring

Fiat Chrysler just announced a pair of recalls totaling nearly 311,000 units. The bigger recall affects certain 2016 and 2017 model year Jeep Wranglers. Although, since FCA claims all of the affected 2017s are in the company's hands, really, only 2016 owners should pay attention here. The affected Wranglers suffer from an issue where wiring disconnects from impact sensors in certain types of crashes, potentially preventing the airbags and pretensioners from activating. FCA uncovered the problem in what its press release calls "a routine, in-house crash test" and claims "service availability is imminent." The affected Jeeps require a simple rewiring. The other recall, announced Tuesday, is more of a fleet issue, affecting 2007 to 2013 model-year Ram 2500 and 3500 pickups and 3500, 4500, and 5500 chassis cabs and 2011 to 2014 Dodge Charger Pursuit police vehicles. There's a problem with "premature diode wear" in alternators that are subject to "frequent load cycling, at or near maximum amperage, [or] in hot ambient temperatures." Affected alternators could short out, causing a vehicle to stall or potentially catch fire. FCA lists 182,743 affected Wranglers in the US, 18,011 in Canada, 3,087 in Mexico, and 20,948 in global markets. The Ram/ Charger Pursuit recall lists 74,833 vehicles in the US, 10,077 in Canada, 1,088 in Mexico, and 134 outside the NAFTA region. Of all those vehicles, the Jeep recall hasn't caused any injuries or fatalities, while FCA says it's aware of one "potentially related injury" and no accidents due to its fleet vehicle recall. FCA says it will notify owners/operators of affected vehicles when service appointments are available. As per usual, all the work is free of charge. Related Video:

Land Rover Defender V8 vs. Jeep Wrangler Rubicon 392 | V8 4x4s square off on paper

Land Rover pulled the sheet off its 2022 Defender on Wednesday, introducing another high-performance V8 to the off-road segment. This time, it's a 5.0-liter, supercharged V8 boasting 518 horsepower. It will be available in both the Defender 90 and 110 models. In the former, Land Rover says it can crack off a 0-60 run in just 4.9 seconds on its way to a top speed of 149 mph. The long-wheelbase 110 will be a bit slower, but "slow" probably isn't the right adjective to use here at all.  But Land Rover isn't the only automaker offering a high-performance variant of its off-road SUV. While Jeep may have been sneered at for presenting the 2021 Wrangler Rubicon 392 on the heels of the 2021 Ford Bronco's introduction, it starts to make a lot more sense in this context. There's reportedly a high-output Bronco on the way, too, so call Jeep the dinosaur of the group all you want, but you can't put a price on being first. Well, you can, actually, but that's not the point.  Thankfully, both Land Rover and Jeep have provided enough specs for us to rough out a comparison chart. Since the Rubicon 392 is offered only in four-door guise, we're looking at the long-wheelbase Defender 110 as its direct competitor here. Have a look: There are a few caveats to mention off the top. For starters, we don't have an official curb weight for the V8-powered Defender yet, as Land Rover has not finalized its U.S. specs. We used the European figures (as provided by a spokesperson), which we expect to be accurate within about 50 pounds. The 0-60 time provided by Land Rover was for the Defender 90, which is smaller and somewhat lighter than the 110. When equipped with the inline-6, the Defender 110 is about a tenth of a second slower to 60 than the Defender 90, so we figure it should be roughly the same for the V8.  While the Defender has nearly 50 horsepower on the Wrangler, that advantage disappears thanks to the Land Rover V8's monster weight penalty, which will fall somewhere between 600 and 700 pounds depending on equipment. Yikes. On the flip side, however, the Land Rover has the edge in top speed, and it's not even close. Chalk that up to the tires, we suspect. We know for a fact that the Rubicon 392's all-terrains dictate its speed limiter; Jeep's own engineers told us as much. This could make for a (hypothetically) interesting drag race, as the Jeep's advantage off the line may evaporate once triple digits come into play.

Jeep Wrangler rides into SEMA on new Mopar performance axles

Mopar is unveiling Jeep Performance Parts axles as the latest off-road accessory to the Jeep Wrangler, which itself won the "4x4/ SUV of the Year" honors at SEMA for the ninth consecutive year. The show opens Tuesday and continues through Friday at the Las Vegas Convention Center. Mopar teamed with longtime partner and auto supplier Dana to develop the axles, which are co-branded under the name JPP Ultimate Dana 44 AdvanTEK. They're installed on a Nacho Wrangler concept at Mopar's 15,345-square-foot display. The high-strength axles are built in the U.S. and feature gear technology that reduces gear set packaging, with added strength and overall rigidity for the trail. The high-clearance carrier design adds an extra half-inch of ground clearance, with an expanded range of gear ratios (4.56, 4.88, 5.13 and 5.38) to accommodate for more tire sizes. Chromoly axle shafts, thicker quarter-inch steel bracket mounts, 9.5-millimeter tubes and upgraded U-joints also add durability, while a nodular iron differential cover adds rugged looks, and its ribbing adds strength and rigidity. The direct bolt-in assembly allows for use of OEM components and includes electronic differential lockers already installed. The axles will be available for purchase starting next month. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Jeep Wrangler Mopar Performance Axles: SEMA 2018 Related Gallery Mopar Jeep Performance Parts Wrangler off-road axle Image Credit: Live photos copyright 2018 Drew Phillips / Autoblog.com SEMA Show Jeep SUV Off-Road Vehicles Performance axle dana