1981 Jeep Cj8 Scrambler (driven Almost Daily) on 2040-cars

Auto blog

Here's what it'll take to build a Jeep Grand Cherokee Hellcat

Let's get one thing straight: We want a 707-horsepower Grand Cherokee Hellcat to happen. Badly. The latest report from Motor Authority is encouraging; the bonkers SUV supposedly has a codename, Project K, and has been given the green light for production. Fingers crossed. You might be wondering why the Trackhawk isn't already a thing. Hellcat engines exist, SRT Grand Cherokees exist, so just combine the two, right? It's not quite that easy. Here, we outline what needs to happen, why it should be the quickest Hellcat vehicle out there, and why it won't come anywhere near 200 miles per hour. How To Build A Hellcat Jeep The first engineering problem is feeding the air-intensive beast that is the 6.2-liter supercharged V8. The first engineering problem is feeding the air-intensive beast that is the 6.2-liter supercharged Hellcat V8. Breathing is important on two counts: pulling in enough air for the combustion to put out 707 hp, and then cooling the various heat exchangers once the engine is up to temperature. Dodge did it with the Charger and Challenger, it can do it with the Jeep. This is one place where the Grand Cherokee's larger frontal area might be a boon, as it gives the engineers more surfaces through which to suck air. Once you generate the 707 horsepower and 650 pound-feet of torque, it has to get to the wheels somehow. Jeep's current SRT all-wheel-drive system will at least need some beefing up to handle the torque. It could require a more complete re-engineering. We at least know the ZF-supplied eight-speed auto, used in the Dodge Hellcat models, is up to the task. The Hellcat engine should fit in the Grand Cherokee, as it's about the same size as the 6.4-liter currently in SRT Jeeps, but the Hellcat is taller because of its supercharger. The hood may need to be raised or at least resculpted for clearance, as well as to address those cooling needs. Quicker Than Everything, But Not Faster 200 mph? We're skeptical, from both a physics standpoint and a legal one. A reminder of the quick/fast distinction: quick is acceleration, fast is road speed. The Jeep's all-wheel drive will help put the Hellcat engine's power to the ground in a more manageable way than the Charger and Challenger do through just the rear wheels. That means better acceleration times than the Dodges (11.0 seconds in the quarter-mile for the Charger Hellcat, 11.2 for its Challenger sibling).

Junkyard Gem: 1983 AM General postal Jeep DJ-5L

When neither snow nor rain nor gloom of night will stay you from your appointed rounds, you don't need fancy styling or futuristic technology. All you need is a simple steel box with four wheels, one seat (on the right-hand side), a mail-sorting tray, and an engine. The Jeep DJ was that vehicle, and DJs served as workhorses for the United States Postal Service starting in 1955 and — in some rural areas— into our current century. Here's one of the last ones made, found covered with snow in a Denver self-service wrecking yard. Related: Postal truck prototypes spied from Oshkosh and Karsan When American Motors bought Jeep in 1970, it built and sold DJs via its AM General subsidiary. The DJ-5 was a stripped-down, two-wheel-drive version of the pretty-spartan-to-start-with Jeep CJ, and there wasn't much to go wrong with it. The final year for the DJ-5 was 1984. During the AMC era, the DJ received an ever-shifting array of engines, depending on what looked like the best deal in Kenosha at a given time. Starting with the Chevrolet Nova straight-four, Jeep DJ engine compartments boasted AMC straight-sixes of 232- and 258-cubic-inch displacements, followed by Audi 2-liter straight-fours (yes, the same engine used by the Porsche 924), then the 2.5-liter GM Iron Duke four, and finally the 2.5-liter AMC straight-four. This DJ-5L has Duke power. The early DJs had manual transmissions, but all the AM General DJ-5s came with automatics. If you think an Iron Duke powering a Jeep is odd, consider that it's bolted to a Chrysler Torqueflite transmission. Once the USPS was done with them, cheap DJ-5s flooded the market. This one has had a random junkyard seat swap, but retains the handy mail-sorting tray. Featured Gallery Junked 1983 Jeep DJ-5L View 21 Photos Jeep Commercial Vehicles Classics amc mail truck

Baby Jeep to join Renegade in FCA's plan for new Italian-built models

FCA is boosting its European production, introducing new models that will be built in currently under-utilized manufacturing facilities. Among the new models is a new small Jeep, smaller than the current Renegade, as Automotive News reports. FCA's Mike Manley mentioned the entry-level Jeep model earlier this year, also saying that the vehicle is targeted to European and possibly Latin American customers; in the summer, Autocar placed the launch date in 2022. The new "baby" Jeep would be made in the same factory in Pomigliano, Italy, as the small Fiat Panda, which is a top seller in Italy. The current generation Panda was introduced in 2011; if it gets a replacement in 2022, it could possibly share a platform with the Jeep model — or, the Jeep could be an eventual outright replacement for the Panda. One of Fiat's earlier core products, the Punto hatchback, was canned in August, and that production capacity will be used to make the Jeep Compass instead, at the Renegade-producing Melfi factory in southern Italy. The Compass has not previously been built in Europe. The Fiat model portfolio would be shrunk to just the 500 model family and the Panda — the 500 would also be FCA's key electric vehicle offered in Europe. It is not yet clear whether the electric 500 would be made in Turin, Italy, or in Poland; Turin might also get a Giardiniera-badged wagon version of the refreshed 500. As for the Alfa Romeo brand, it is set to gain an even bigger SUV model than the Stelvio, based on the Maserati Levante's platform. The Levante's sales have suffered recently in China, but Maserati does have light in the horizon: The Alfieri 2+2 grand tourer is still in the cards, with a launch expected for 2020 and both a convertible and an electrified version planned to follow. The Alfieri would be made in Modena, Italy, according to Automotive News' sources. None of these plans namedrop the storied Lancia brand, which has been shrunk to just the Ypsilon hatchback, based on the same platform as the current 500 and Panda. Despite that, the Ypsilon was again the second-bestselling car in Italy after the Panda in October. It is unlikely that FCA will be able to ignore this, but it is just as unlikely that any development money will be afforded to come up with a replacement for the Ypsilon, which is as similarly old as the Panda. Perhaps official announcements expected on Thursday will also clarify what will happen to Lancia.