1981 Cj-8 Scrambler on 2040-cars

Auto blog

Chrysler recalling over 200k vehicles across its brands

With more than 200,000 units across six separate recalls and almost all of its brands, it appears that Chrysler has officially jumped headfirst into the recall pool this month. The National Highway Traffic Safety Administration has issued three official recalls for the automaker, and The Detroit News is reporting that the automaker itself has announced three more.
The biggest of the recalls applies to about 120,000 Dodge Charger, Dodge Challenger and Chrysler 300 models for 2011 and 2012 due to faulty wiring harnesses for the seat-mounted side airbags, which could lead to these airbags not deploying in the event of a crash. A little more than 60,000 two-wheel-drive versions of the 2007-2008 Dodge Nitro and 2008 Jeep Liberty SUVs are being recalled due to a heat shield that could cause the driveshaft to break, which if that isn't bad on its own, could then hit underneath where the airbag sensor is mounted, causing the airbags to deploy. Wrapping up NHTSA's recall notices, about 20,000 Jeep Patriot and Jeep Compass models for 2012 are also being recalled due to a problem with the fuel tank transfer tube that could lead to the vehicle stalling. The LX car recall campaign is going into effect this month, while the other two will start next month - all three notices are posted below.
In addition to the official NHTSA recalls, The Detroit News is also reporting that Chrysler is recalling more than 16,000 Ram trucks and a small number of Dodge Dart sedans. Around 6,500 2013 Ram 1500 trucks will be recalled due to an improper adjustment of the parking brake cable from the factory, while 7,000 Cummins-powered 2013 Ram Heavy Duty trucks are being recalled due to an engine cover that does not have as much heat resistance as it is supposed to. Finally, a total of 46 Dodge Dart sedans are being recalled due to a problem with the brake calipers and/or parking brake.

New 2018 Jeep Wrangler is definitely a Jeep Wrangler

Jeep is hiding details on the new Wrangler about as well as a colander holds water. The good people over at JL Wrangler Forums have managed to get ahold of some new images of the next-gen Wrangler. Surprise! It looks exactly how we expected it to look. These new images give us our best view yet, showing a number of details that we couldn't even glean from spy photos. Enthusiasts can put down their pitchforks. The Wrangler can still go topless. The two images - one of the front and one of the rear - show off what appears to be a Wrangler Unlimited Rubicon. The second photo is notable since it finally confirms that the doors and roof are fully removable, a feature that some feared would disappear with the new model. It looks like a fixed roll cage will help strengthen the Wrangler and protect occupants in the case of an accident. Hinges up front mean the windshield is still able to fold forward as well. The rest of the Wrangler, though all new, just updates the Jeep's timeless design. Up front, the grille is canted rearward at the top, the fog lights move to the ends of the bumper, the turn signals move to the front of the fender, and the hood latches are pushed forward a bit. The windshield appears to be a bit more upright and less curved than the current model. Around the side, we can see new vents behind the rear fenders. The door hinges looks smaller, and the mirrors have integrated side marker lights. There is a new line that cuts below the windows, flowing to the rear of the Wrangler. At the back, we can see that the tail lights now wrap around to the Wrangler's side, though they still look like the square lights we've always had. There is no sight of a rear-mounted spare, but plenty of spy shots have shown that it should carry over, new backup camera and all. It also looks like the new mounting points for the roll cage should provide a bit more cargo space. Look for more news, images, and renders as the Wrangler's development moves along. Related Video:

FCA and UAW deal could mean huge production shakeups

The big labor contract between Fiat Chrysler Automobiles and the United Auto Workers is likely to lead to some very serious production shakeups across the company's North American manufacturing operations. That's according to a new report from Automotive News, which details the sweeping changes at no fewer than five production facilities in Michigan, Illinois, Ohio, Mexico, and Poland. So without further ado, here's what's going where, presented in easy to digest bullet form. Ram 1500 production would move from Warren, MI to Sterling Heights, MI Warren, MI would be retooled for unibody production and would handle the Jeep Grand Wagoneer and could potentially build Grand Cherokees to ease the strain on Detroit's Jefferson North factory Chrysler 200 production would move from Sterling Heights, MI to Toluca, Mexico Dodge Dart production would move from Belvidere, IL to Toluca, Mexic Fiat 500 production, which is currently handled by Toluca, would be concentrated in Poland, where the Euro-spec Cinquecento is built Jeep Cherokee production would move from Toledo, OH to Belvidere, IL to make room for Wrangler and Wrangler Pickup production Like we said, those are some big changes. But, as FCA CEO Sergio Marchionne said in an earlier interview with Automotive News, this kind of shakeup would make a lot of sense. In that August interview the exec said that automakers moved truck production to Mexico because they were "threatened" by the UAW. "The only thing [the UAW] want is to move the truck back. Which is right. If you move the truck back here, which is [the UAW's] domain, [and move] all the cars that we get killed on somewhere else, we could actually make sense of this bloody industry and actually increase the number of people employed in this country and really share wealth because we are making money," Marchionne told AN. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing UAW/Unions Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA toluca warren sterling heights