1972 Jeep Cj5 Excellent Restored Condition With Lift Kit on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Marchionne uses racial epithet to describe what must power future Alfa Romeo models

Sergio Marchionne and his Fiat empire have a lot riding on the US return of the Alfa Romeo brand. The endeavor has been in progress for what feels like a lifetime - certainly for as long as Fiat has had the Chrysler brand under its Italian wing.
It's not surprising that Fiat CEO Marchionne needs a perfect first Alfa to mark a return to America. And here's where things get dicey. Nobody would argue with Marchionne's insistence that Alfa Romeo's be powered by Italian engines - as Marchionne himself is quoted to have said at the 2013 Detroit Auto Show, "There are some things that are well done in Italy."
If not what he said, then, it's how he said it that has eyebrows raised. "I cannot come up with a schlock product, I just won't. I won't put an American engine into that car. With all due respect to my American friends, it needs to be a wop engine." Wait, what's that?

EPA posts 2018 Jeep Wrangler Unlimited fuel economy

When Jeep loosed a trio of 2018 Wrangler photos in October, Jeep cognoscenti parried over details like radio antenna placement and painted tailgate hinges, while every other viewer merely noted, "It's still a Wrangler." Now that the Environmental Protection Agency's listed fuel economy ratings for the 2018 Wrangler Unlimited with the 3.6-liter V6, Jeep savants will again parry over details. Every other viewer will merely note, "It's still got Wrangler gas mileage." According to the EPA, the current Wrangler Unlimited with the 3.6-liter V6 and six-speed manual clocks 16 miles per gallon in the city, 21 on the highway, and 18 combined. The 2018 version with the same six-speed manual comes in at 17/23/19. Switching transmissions, the current model with the five-speed automatic hooks up 16/20/18, the 2018 model with an eight-speed automatic does 18/23/20. Those numbers might not jump off the page, yet according to the EPA's cost calculator, you'll save $250 per year on gas with the eight-speed auto 2018 Wrangler Unlimited, $150 per year with the coming six-speed manual. The eight-speed auto option also exceeds Chrysler's prediction from 2014 of a nine-percent improvement in fuel economy over the five-speed auto. Now we wait for numbers on the dark horse four-cylinder, which we'd expect to best the sixer's numbers, unless the rumors are true and the four-pot really is packing every wild horse it can handle. In that case, we'll turn to the EcoDiesel for frugal kicks. If we don't find out beforehand, we can expect those goodies and more at the LA Auto Show in December. Related Video: News Source: FuelEconomy.gov via Motor Trend Auto News Government/Legal Jeep SUV Off-Road Vehicles