1992 Jaguar Xjs Convertable 12 Cyl Prestine No Reserve on 2040-cars

Auto blog

Jaguar may kill supercharged V6 to make way for inline-six

This could be the last year to score a Jaguar with the carmaker's 3.0-liter supercharged V6. Autocar reports that Jaguar deep-sixed the the XE S and XF S in the UK due to poor sales and difficulty coping with European emissions regulation changes taking place this year. The mag expects the XJ and F-Pace to lose the V6, too, but suspects the F-Type might retain the engine. It's possible, however, the bent-six with up to 380 horsepower and 339 pound-feet of torque might finally be retiring for a reason reported on for at least three years: To make way for a 3.0-liter inline-six from the Ingenium line of motors. In 2015, Motor Trend noted the supercharged V6 would die at the end of 2016, succeeded by a "more powerful Ingenium inline-six," likely to be turbocharged. One year later, Car laid out a new family of Ingenium inline-sixes in gasoline and diesel versions. There would be three gas options with 300, 400, and 500 horsepower, plus three diesels with 275, 335, and 400 hp and herds of torque. In Car's report, the engines were meant to be here in 2017. This could be the year it finally happens. A Jaguar spokesman in the UK told Autocar that an uptake of less than 2 percent on the S models, "Coupled with impending emissions regulation changes, it makes sense to remove these variants from sale in the UK." When Jalopnik asked Jaguar U.S. about availability here — we aren't a party to the imminent European emissions changes — the carmaker would only say that the engine remains available in the current XE, XF, XJ, F-Type and F-Pace. No matter the timeline, Jaguar would want a six-cylinder to fill the gap from the 296-hp Ingenium 2.0-liter four-cylinder to the supercharged 5.0-liter V8 that starts at 470 hp. Jaguar expanded an area of its Wolverhampton, UK, engine factory to build the scalable Ingenium line. An inline-six would not only reconnect with Jaguar's past — and the firm's long-hooded cars remain ready to swallow them — the straight-six is lighter, has fewer moving parts, and emits less pollution than the supercharged V6. It is also compatible with front-, rear- and all-wheel drive, longitudinal and transverse mounting, and hybrid applications, so expect to see the motor migrate to the Range Rover, Range Rover Sport, and Land Rover Discovery.

Lister teases 675-hp, 200-mph Stealth SUV

In the middle of 2018, Lister unveiled what was then called the LFP, intended to be the world's fastest SUV. The initials stood for Lister F-Pace and the dark green hulking beauty was based on, surprise, the Jaguar F-Pace SVR. Except where the F-Pace SVR used a supercharged 5.0-liter V8 producing 550-horsepower to claim a 176-mile-per-hour top speed, the LFP would wring that engine out to 675 horsepower in order to hit 200 miles per hour. Since that time, Lister's rolled out other models such as the F-Type convertible-based LFT-C 666 and Knobbly roadster continuation cars. At last, the LFP is ready for primetime, and it brings the new name of Lister Stealth with it. According to CEO Lawrence Whittaker, all the firm is waiting on is for the UK's lockdown to end, then the high-rise double-ton party can start. For now, we have a teaser video with a few quick visuals of the dangerously aggressive bodywork and a microphone-melting clip of someone dancing on the throttle. Save for the audio distortion, it looks and sounds superb. The ingredients of the transformation from F-Pace SVR to Stealth remain secret. As Pistonheads pointed out, the 675-hp Lister Thunder, based on the F-Type SVR hardtop, installed a new supercharger pulley, air filter and intercooler, a freer exhaust, and a remapped ECU to unlock 100 more horses. It's reasonable to expect the same template as a starting point for the Stealth. If the crossover can hit its 3.5-second mark from zero to 62-miles per hour, it will beat everything we can think of that isn't a Tesla, and the Stealth will top all comers if it nails the promoted top speed. Whittaker said production stops at 250 units, with orders having already come in. The price starts at "around GBP140,000," equal to about $175,000 greenbacks. Tiff Needell, who raced Lister cars in the 1990s, has been lined up for video presentation work once the proper launch takes place. If we're lucky, Needell will be the one to show and tell us what the Stealth can do, occasionally sideways, with lots of smoke. Related Video:

Jaguar Classic's 3.8-liter engine block costs nearly as much as a new Jetta

Jaguar is helping collectors restore its vintage models by resuming production of the 3.8-liter six-cylinder engine block it built between 1958 and 1968. Called XK, the straight-six originally powered half a dozen models (including the famous E-Type), and its modern recreation costs nearly as much as a new compact sedan. Wearing part number C22250, the cast-iron block is built to the original's specifications by Jaguar's Classic division, and it comes with a 12-month warranty. Sourcing a used block would likely be markedly cheaper than ordering a new one from the factory, but enthusiasts who value originality above all will appreciate the fact that it comes certificate of authenticity. Customers who send the company proof of vehicle ownership can even retain the serial number from the engine they're pulling out, though an asterisk will identify it as a replacement. Jaguar built the XK engine for several decades, but the 3.8-liter variant only remained in production for 10 years. It powered cars like the surprisingly quick XK 150 roadster, the stately Mark IX and early examples of the E-Type, though its displacement grew to 4.2 liters in 1964. As of this writing, only the 3.8-liter XK is available new. If the E-Type you're painstakingly restoring deserves nothing less than the best, or if you think a 3.8-liter block makes an awesome coffee table, you'll need to send Jaguar a check for GBP14,340 including taxes, a sum that represents approximately $17,800 at the current conversion rate. Enthusiasts will also need to source pistons, connecting rods, a crankshaft and a complete cylinder head, among many other parts, so the cost of a full rebuild will lie well beyond the $20,000 threshold. For context, Volkswagen charges $18,895 for an entry-level Jetta. Related Video: