42k Low Mile Free Shipping Warranty 1 Owner Clean Carfax Rare Luxury Collector on 2040-cars

Auto blog

Junkyard Gem: 1995 Jaguar XJR

It's not too difficult to find discarded examples of the supercharged-V8-powered Jaguar XJR of the X308 generation, but the earlier X300-based XJR with its blown straight-six is a much more elusive Junkyard Gem. Here's one that just turned up in a Denver self-service knacker's yard. For many years, the Denver Pick Your Part was a funky, muddy operation on an industrial stretch of Federal Boulevard. I bought a lot of parts for various projects and documented dozens of discarded vehicles for this series there. On April first, LKQ moved that operation to a brand-new location a half-mile away and I showed up early to experience the grand opening. I'll miss the old Denver Pick Your Part, even with the treacherous footing, but sometimes even junkyards get junked. The new location is set in a vast asphalt parking lot, which should make it easier for shoppers to get around and extract parts. One of the employees drives this seriously cool Scion xB project, so that's a good sign. As I walked the rows, this two-tone Jag caught my attention immediately. What's going on here? The VIN says it's a genuine XJR, complete with supercharged 4.0-liter straight-six rated at 322 horsepower and 378 pound-feet. That beat the 313-horse V12 in the XJ12 that sat next to it in the showrooms. The supercharger is a member of the same Eaton family that was used in the Ford Thunderbird Super Coupe. This makes sense, because Ford had purchased Jaguar in 1989. The U.S.-market X306 XJR was available only with an automatic transmission; a few hundred with five-speed manuals were sold in Europe. The version we got here was good for 14.9-second quarter-mile times and ran 0-60 in 6.6 seconds— not bad for a car that scaled in at 4,215 pounds. The MSRP was a cool $65,000, or about $134,206 in 2024 dollars. The 1995 XJ12 listed at $77,250, which comes to $159,499 after inflation. This generation of XJR was sold here for just the 1995 through 1997 model years, after which it was replaced by the V8 XJR. Just 6,547 were built. This one received a heavy customization at some point, including big SUPERCHARGED badging. The bonnet is covered with faux carbon fiber, which was all the rage during the early Fast & Furious Era. The upholstery has been redone in well-executed two-tone embroidered leather. I knew there had to be some traces of this car online. Sure enough, Mecum auctioned it in Denver back in the summer of 2015.

Strong JLR sales in China boost Tata Motors' quarterly profit

BENGALURU, India — Tata Motors Ltd on Friday posted a 67.2% surge in quarterly profit. Sales at its luxury car unit, Jaguar Land Rover (JLR), improved in key market China as the country led a recovery in the global automobile industry from the pandemic. The Indian carmaker had logged losses for three straight quarters as the COVID-19 pandemic dented business in several of its key markets even as it was already dealing with uncertainties around Brexit, weak demand and rising costs. The Brexit trade deal agreed upon in December has avoided the risk of tariffs on automotive parts and finished vehicles, Tata Motors said, adding that JLR remains encouraged by the Brexit trade deal. JLR sales in China jumped 20.2% on-quarter and were 19.1% higher from the year-ago period. Retail sales at the unit, which accounts for most of the company's revenue, were up 13.1% from a quarter ago, but still 9% lower than pre-pandemic levels. The company said it had saved 400 million pounds ($548.96 million) during the December quarter at JLR under Project Charge, taking the total savings to 2.2 billion pounds so far. Tata Motors has set a full-year target of saving 2.5 billion pounds. Consolidated net profit came in at 29.06 billion rupees ($398.52 million) for the third quarter, compared with a profit of 17.38 billion rupees a year earlier. It had reported a loss of 3.14 billion rupees in the previous quarter. The festive season in mid-November, during which Indians typically make big-ticket purchases, also helped overall sales. "Due to a strong festive season and a clear preference for personal mobility, the PV business posted its highest sales in last 33 quarters," Tata Motors Chief Executive Officer and Managing Director Guenter Butschek said. Total revenue from operations rose 5.5% to 756.54 billion rupees.

2020 Jaguar I-Pace Suspension Deep Dive | All kinds of weird and wonderful

I’ve driven the Jaguar I-Pace a handful of times, and it always proves to be an enjoyable experience. In case youÂ’re not up to speed, this is JaguarÂ’s dual-motor all-wheel drive all-electric SUV. ItÂ’s quick, it looks cool in a running shoe sort of way, and it delivers a decent 234 miles of range. Sure, it has its faults, particularly when it comes to the infotainment and climate control layout. But the electric JagÂ’s smooth ride comfort and direct steering feel are clear strong points, and its handling stays nicely balanced and displays sharp reflexes as far as IÂ’ve pushed it. That is to say, a strong pace, but nothing that would land me in jail. The suspension plays a big role in all of this, of course. I wanted to see what theyÂ’d done, so I recently put an I-Pace HSE up on jackstands and took a look underneath. Electric powertrain notwithstanding, I found this to be an utterly weird and fascinating machine.    From this vantage it is easy to see the big air spring (yellow arrow). The use of this type of spring medium allows the I-Pace to run at different heights. It mostly runs at standard height, but can also lower the car at highway speeds to lessen aerodynamic drag. ThereÂ’s an even lower mode to ease the loading of passengers and cargo, along with a raised-height off-road mode because, well, this is theoretically an SUV. It looks like it has a double wishbone front suspension, too, with a high-mount upper arm (green). But we canÂ’t be sure until we move in closer.   With the wheel turned, we can see that this is a double wishbone front suspension in the sense that it has a single ball joint (green) at the bottom. ThereÂ’s lots of nice-looking forged and hollow-cast aluminum bits and pieces, too. But it looks odd in some other respects. The lower arm (yellow), for example, seems to have a joint of some kind in it. Meanwhile, near the top, you can see how the tall upright (or hub carrier, if you like) is curved (red) to provide tire and wheel clearance. Use the wheel studs as a reference point and you can imagine how the tire assembly will nestle into that area.   The shock absorber (green) runs up the middle of what is a doughnut-shaped air chamber. A very tall tower of a doughnut, but you get the idea. But you canÂ’t call this a coil-over. Do I hear bag-over? Anyway, a position sensor (yellow) is connected to the upper arm so the height-control system can regulate itself properly.