Leather Interior Low Miles on 2040-cars

Auto blog

Recharge Wrap-up: Jaguar's aluminum recycling, lithium demand rises

Jaguar Land Rover has recycled over 50 metric tons of aluminum over the past year. As Jaguar celebrates a year of sales of the XE – which makes use of recycled aluminum – its closed loop recycling program has prevented some 500,000 metric tons of CO2 emissions. The XE is the first car in Jaguar's REALCAR (short for REcycled ALuminium CAR) program, and the company says it has recycled an amount equal to almost 200,000 XE body shells. "Its success so far marks a significant step towards our goal of having up to 75 percent recycled aluminium content in our vehicle body structures by 2020," says Group Engineering Director Nick Rogers. Check out the video above, and read more from Jaguar. Electric vehicle manufacturers are putting a strain on lithium supplies. Since the metal is used in the batteries of most electric vehicles, demand is expected to grow by 8.8 percent a year through 2019. While Tesla has deals with natural resource companies Pure Energy Minerals and Bacanora Minerals, they won't be able to keep up with the automaker's goal of 500,000 EVs by 2020. Tesla, BYD, and other EV manufacturers are going to be competing for these resources, and new lithium firms will enter the market to compete for automakers' business. Read more in the press release or the blog post from Market Research. Connecticut's Department of Energy and Environmental Protection (DEEP) has announced a new funding opportunity for building public EV charging infrastructure. DEEP is accepting applications from private entities for awards of up to $10,000 for installing a public dual-head charger or two single-head chargers, for up to 17 new charging stations. It prefers proposals for underserved areas with major traffic, such as downtowns. Connecticut has a goal of putting 3.3 million EVs on the road by 2025. Read more in the notice from DEEP, or visit DEEP's website. Car clubs are responsible for the removal of about 25,000 cars from London roads. According to a new survey, every club car removes 10 private cars, as club members sell their own vehicles. The survey of 4,000 Londoners also shows that carsharing members drive an average of 750 fewer miles every year after joining. London is currently home to 186,000 car club members using 2,800 cars, while the UK's 220,000 club members use over 3,800 club cars. Also, many car clubs offer access to electric vehicles, which helps to further reduce emissions.

Jaguar XFR-S pitted against Mercedes E63 AMG

It was Steve Sutcliffe at Autocar who got the tough job of comparing the Mercedes-Benz E63 AMG to the limited edition Jaguar XFR-S on the track and sheep-strewn British B-roads. In UK spec both Mephistophelean sedans wrangle the same 542 horsepower, but step out of the corral and things look to weigh heavily in the Mercedes' favor: it has more torque, it's lighter, it's quicker from 0-to-60 and it's less expensive.
But that's on paper. Sutcliffe was given the job to see what effect all those letters and numbers had on the real-world driving experience. One of them is "an absolute hoot at the track" with great steering and weight management, one is "magnificent." To find out which is which, watch the video below.

Driving Jaguar's Continuation Lightweight E-Type

Something has happened to sports cars over the past 15-20 years. While reaching ever-higher levels of quantitative dominance the driving experience continues to become more sterile. Stability control, torque vectoring, variable electronic steering racks, lightning-quick dual-clutch automatic transmissions – all these make it easier to harness more power and drive faster than ever before. And yet too often it feels like something is missing. There is a growing divide between the capabilities of the modern performance car and the driver's sense of connection to the experience. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. The story of the Lightweight E-Type goes back to 1963, when Jaguar set aside eighteen chassis numbers for a run of "Special GT E-Type" cars. These were factory-built racers with aluminum bodies, powered by the aluminum-block, 3.8-liter inline-six found in Jaguar's C- and D-Type LeMans racecars of the 1950s. Of the eighteen cars slated for production, only twelve were built and delivered to customers in 1964. For the next fifty years, those last six chassis numbers lay dormant, until their rediscovery a couple of years ago in a book in Jaguar's archives. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. Jaguar Heritage, a section of Jaguar Land Rover's new Special Vehicle Operations (SVO) division, took on the task of researching the original Lightweight E-Types and developing the methods to create new ones. Every aspect of the continuation Lightweight E-Type, from the development of the tools and molds used to build the cars, to the hand-craftsmanship, reflects doing things the hard way. They may not build them like they used to, but with these six special E-Types, Jaguar comes awfuly close, if not better. Working alongside the design team, Jaguar Heritage made a CAD scan of one side of an original Lightweight E-Type body. That scan was flipped to create a full car's worth of measurements. That ensured greater symmetry and better fit than on the original Lightweight E-Types (which could see five to ten millimeter variance, left-to-right). The scan was also used to perfect the frame, while Jaguar looked through notes in its crash repair books to reverse-engineer the Lightweight E-Type's suspension. The team repurposed a lot of existing tooling for the continuation cars, and developed the rest from analysis of the CAD scan.