2013 Jaguar V6 Awd on 2040-cars

Auto blog

Junkyard Gem: 1995 Jaguar XJR

It's not too difficult to find discarded examples of the supercharged-V8-powered Jaguar XJR of the X308 generation, but the earlier X300-based XJR with its blown straight-six is a much more elusive Junkyard Gem. Here's one that just turned up in a Denver self-service knacker's yard. For many years, the Denver Pick Your Part was a funky, muddy operation on an industrial stretch of Federal Boulevard. I bought a lot of parts for various projects and documented dozens of discarded vehicles for this series there. On April first, LKQ moved that operation to a brand-new location a half-mile away and I showed up early to experience the grand opening. I'll miss the old Denver Pick Your Part, even with the treacherous footing, but sometimes even junkyards get junked. The new location is set in a vast asphalt parking lot, which should make it easier for shoppers to get around and extract parts. One of the employees drives this seriously cool Scion xB project, so that's a good sign. As I walked the rows, this two-tone Jag caught my attention immediately. What's going on here? The VIN says it's a genuine XJR, complete with supercharged 4.0-liter straight-six rated at 322 horsepower and 378 pound-feet. That beat the 313-horse V12 in the XJ12 that sat next to it in the showrooms. The supercharger is a member of the same Eaton family that was used in the Ford Thunderbird Super Coupe. This makes sense, because Ford had purchased Jaguar in 1989. The U.S.-market X306 XJR was available only with an automatic transmission; a few hundred with five-speed manuals were sold in Europe. The version we got here was good for 14.9-second quarter-mile times and ran 0-60 in 6.6 seconds— not bad for a car that scaled in at 4,215 pounds. The MSRP was a cool $65,000, or about $134,206 in 2024 dollars. The 1995 XJ12 listed at $77,250, which comes to $159,499 after inflation. This generation of XJR was sold here for just the 1995 through 1997 model years, after which it was replaced by the V8 XJR. Just 6,547 were built. This one received a heavy customization at some point, including big SUPERCHARGED badging. The bonnet is covered with faux carbon fiber, which was all the rage during the early Fast & Furious Era. The upholstery has been redone in well-executed two-tone embroidered leather. I knew there had to be some traces of this car online. Sure enough, Mecum auctioned it in Denver back in the summer of 2015.

2020 Jaguar I-Pace Suspension Deep Dive | All kinds of weird and wonderful

I’ve driven the Jaguar I-Pace a handful of times, and it always proves to be an enjoyable experience. In case youÂ’re not up to speed, this is JaguarÂ’s dual-motor all-wheel drive all-electric SUV. ItÂ’s quick, it looks cool in a running shoe sort of way, and it delivers a decent 234 miles of range. Sure, it has its faults, particularly when it comes to the infotainment and climate control layout. But the electric JagÂ’s smooth ride comfort and direct steering feel are clear strong points, and its handling stays nicely balanced and displays sharp reflexes as far as IÂ’ve pushed it. That is to say, a strong pace, but nothing that would land me in jail. The suspension plays a big role in all of this, of course. I wanted to see what theyÂ’d done, so I recently put an I-Pace HSE up on jackstands and took a look underneath. Electric powertrain notwithstanding, I found this to be an utterly weird and fascinating machine.    From this vantage it is easy to see the big air spring (yellow arrow). The use of this type of spring medium allows the I-Pace to run at different heights. It mostly runs at standard height, but can also lower the car at highway speeds to lessen aerodynamic drag. ThereÂ’s an even lower mode to ease the loading of passengers and cargo, along with a raised-height off-road mode because, well, this is theoretically an SUV. It looks like it has a double wishbone front suspension, too, with a high-mount upper arm (green). But we canÂ’t be sure until we move in closer.   With the wheel turned, we can see that this is a double wishbone front suspension in the sense that it has a single ball joint (green) at the bottom. ThereÂ’s lots of nice-looking forged and hollow-cast aluminum bits and pieces, too. But it looks odd in some other respects. The lower arm (yellow), for example, seems to have a joint of some kind in it. Meanwhile, near the top, you can see how the tall upright (or hub carrier, if you like) is curved (red) to provide tire and wheel clearance. Use the wheel studs as a reference point and you can imagine how the tire assembly will nestle into that area.   The shock absorber (green) runs up the middle of what is a doughnut-shaped air chamber. A very tall tower of a doughnut, but you get the idea. But you canÂ’t call this a coil-over. Do I hear bag-over? Anyway, a position sensor (yellow) is connected to the upper arm so the height-control system can regulate itself properly.

V12-powered Jaguar E-Type Series 3 the restomod treatment from UK firm

As Jaguar tries to figure out its future, a growing number of aftermarket companies are reinventing its past. British restoration shop E-Type UK is the latest company to announce a restomod program for the popular sports car released in 1961. It's working with later Series 3 models, which is a little unusual, and it leaves no part untouched. E-Type UK starts every Unleashed project with a donor car; it doesn't build an E-Type from scratch. After strengthening the basic platform, it bores out the V12's cylinders to increase its displacement to 6.1 liters, 800 cubic centimeters more than stock. Additional modifications, like an electronic fuel-injection system and a free-flowing exhaust system, boost the engine's output to 400 horsepower, and a five-speed manual transmission sends the cavalry to the rear wheels. Four-piston front brake calipers ensure the Unleashed stops as well as it goes. With the engine finished and tuned, E-Type UK turns its attention to the chassis. It fits the E-Type with technology the original model could only dream of, like fully adjustable shock absorbers. Wire wheels are standard equipment, they fit the car's sleek profile well, but their diameter increases slightly to 16 inches to clear the bigger brakes. Designers restyled the bumpers, the grille, and the exterior emblems, though the changes are relatively subtle, and they added LED headlights to give the E-Type the visibility of a modern car. Inside, the only limit is the thickness of the buyer's wallet. Anything is possible; the options include different types of leather upholstery and various trim options. Heated seats, LED lighting, a push-button ignition, Bluetooth connectivity, and a surround-sound system are among the equipment added by E-Type UK to encourage future owners to drive their Unleashed often. All told, each build requires at least 4,000 hours of labor, which partially explains why pricing starts at GBP325,000 (around $447,600 at the current conversion rate) before the cost of a donor car enters the equation. For context, that money could buy you two examples of the Lamborghini Huracan Evo and a garage to keep them in, a small plane, or 447 examples of your favorite $1,000 econobox. And yet, we doubt E-Type UK will have a difficult time finding clients. Restomods are a big trend in the industry, some are even Volvo-based, and they're never cheap. Related video: This content is hosted by a third party. To view it, please update your privacy preferences.