Bluetooth Connection Heated Seats Leather Seats Power Sun Roof Warranty on 2040-cars

Auto blog

2020 Jaguar XE updated inside and out, diesel engine dropped

For the 2020 Jaguar XE sports sedan, less is more, at least in terms of powertrain offerings and trim levels. But the new, slimmer lineup adopts additional tech features, and the model also sees design tweaks inside and out. The diesel engine and the 3.0-liter V6 have been axed. The 247-horsepower 2.0-liter turbocharged Ingenium inline-four is the base engine. It's mated to an eight-speed automatic transmission and can be had with rear-wheel drive or all-wheel drive. This base engine's new model designation is P250, versus 25t previously. The step-up engine is the 296-hp version of the Ingenium 2.0-liter. Cars so equipped wear a new P300 badge, in place of the previous 30t. All-wheel drive is now standard with the 296-hp engine, and Jaguar claims a zero-to-60-mph time of 5.4 seconds for this powertrain. The exterior design tweaks include new bumpers front and rear, a reshaped rear valence, as well as new LED headlights and taillights. A wider grille with lattice mesh is supposed to draw the XE closer visually to the I-Pace EV. The previous thicket of trim levels — Premium, Prestige, R-Sport, S, Portfolio, and Landmark — have been pruned to just two: S and R-Dynamic S. Newly available is Jaguar Land Rover's InControl Touch Pro Duo infotainment system, which uses a second screen for climate control, flanked by two large knobs that can operate different functions (temperature, fan speed, and seat heating/cooling). The new rearview camera mirror eliminates blind spots, and wireless device charging has been added to the center console. Jaguar also has ditched the rotary shifter in favor of pistol-type shifter found in the F-Type and elsewhere, while surrounding it with a variety of controls, including a flipper switch to toggle among the car's different drive modes. A beefier steering wheel includes capacitive-touch switches. Newly designed seats, with standard leather, are claimed to be more comfortable, while redesigned door panels incorporate wider, softer armrests as well as increased storage capability. Base pricing climbs from $37,990 for the old rear-wheel-drive 20t to $40,895 (including destination) for the new P250. The AWD P250 is $42,894, while the P300 is $47,290. The 2020 Jaguar XE is on sale now. Related Video:

Junkyard Gem: 1965 Jaguar S-Type 3.8

The first Jaguar XJs appeared on American roads in late 1968, and decades of production made it the iconic Jaguar sedan most familiar to us today. Before the XJ, however, there was the Mark 2, and that powerful and stylish midsize saloon sold fairly well here during the 1960s. The S-Type (yes, the Leaper-badged Lincoln LS sibling built by Ford around the turn of the century took its name from this car) was an upgraded version of the original Mark 2, sold here for the 1964 through 1968 model years. Here's a rough but recognizable '65 S-Type 3.8, found in a Denver-area wrecking yard recently. The feature that set the S-Type apart from the ordinary Mk2 was this independent rear suspension, based on the one used in the bigger and costlier Jaguar Mark X. The base Mk2 and its old-timey solid rear axle remained available in 1965, with a sticker price of $5,419 (about $51,460 in 2022 dollars), while the S-Type cost $5,933 (around $56,340 now). Yes, those inboard disc brakes were just as much a nightmare to work on as you'd think, but they reduced unsprung weight and improved the handling and ride. This car was about the same size as a typical Detroit midsize sedan of the day, but far more expensive and much more prestigious. GM's swankiest S-Type-sized offering, the Buick Skylark, cost a mere $2,552 ($24,235 today) and had a notable lack of real wood inside. Actually, that Skylark with the optional 300-cubic-inch (5.0-liter) "Wildcat 355" V8 would have been a lot quicker than the S-Type, at least in a straight line, and your friendly Buick dealer probably could have arranged to have the hot-rod 401 (and its 325 horses) out of the Gran Sport coupe stuffed into a new Skylark sedan. The S-Type of 1965 got this sophisticated DOHC straight-six of 3.8 liters' displacement, rated at 220 horsepower. As you'd expect, someone grabbed the pair of SU sidedraft carburettors before I got here, perhaps before the car even arrived at this place. The 4.2-liter version of this engine used in the Mark X got three carbs. I suspect that this car was bought by a Denver-area Jaguar enthusiast for parts, decades back, and then was used for outdoor storage of components for future projects.  These cars are worth decent money in good condition, but this one would need the application of tens of thousands of dollars to be worth … tens of thousands of dollars. As someone who daily-drove an MGB for a few years, the sight of all this Lucas electrical hardware makes me sweat a little.

Jaguar Land Rover exploring 3D HUD and infotainment projections

With its most recent technology research, Jaguar Land Rover (JLR) is exploring the use of 3D projections for a world before and/or after autonomous vehicles come to fruition. In collaboration with the United Kingdom's University of Cambridge, JLR has developed concepts for a 3D head-up display that shows information on the road ahead and a system that projects personalized 3D infotainment for vehicle passengers.  As of right now, hundreds of production vehicles are equipped with two-dimensional head-up displays, some color, others black and white. Using various techniques and different technologies, manufacturers display information in a flat image in front of a driver. Some might find it distracting or unhelpful to have this in the driver's line of sight, and JLR might have found a solution. Rather than wedge the information in between the person and the view ahead, a 3D system that uses augmented reality could display the info onto the road in front of the driver. JLR thinks the system could project navigation directions, safety alerts such as lane departure, hazard detection or other bits typically found in a car's infotainment or instrument cluster. Some might find this to be even more distracting that 2D head-up displays, but to each his or her own. While the 3D head-up display is something that could be used right now, if it were released and passed legal, part two of JLR's 3D technology research is imagined for a life where truly autonomous vehicles are skating across the country. Using head- and eye-tracking technology, the system could lock into the position of numerous people in a vehicle and give each of them a personalized 3D projection "screen." This could be used to track a trip, look up points of interest, or even watch movies. JLR points out this could be used during ride-sharing without bothering others in the vehicle. The work with the Center for Advanced Photonics and Electronics at Cambridge is still in development for now, but it's only a matter of time before 3D tech makes it into cars in some degree.