2002 Jaguar X-type Base Sedan 4-door 3.0l on 2040-cars

Auto blog

Driving Jaguar's Continuation Lightweight E-Type

Something has happened to sports cars over the past 15-20 years. While reaching ever-higher levels of quantitative dominance the driving experience continues to become more sterile. Stability control, torque vectoring, variable electronic steering racks, lightning-quick dual-clutch automatic transmissions – all these make it easier to harness more power and drive faster than ever before. And yet too often it feels like something is missing. There is a growing divide between the capabilities of the modern performance car and the driver's sense of connection to the experience. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. The story of the Lightweight E-Type goes back to 1963, when Jaguar set aside eighteen chassis numbers for a run of "Special GT E-Type" cars. These were factory-built racers with aluminum bodies, powered by the aluminum-block, 3.8-liter inline-six found in Jaguar's C- and D-Type LeMans racecars of the 1950s. Of the eighteen cars slated for production, only twelve were built and delivered to customers in 1964. For the next fifty years, those last six chassis numbers lay dormant, until their rediscovery a couple of years ago in a book in Jaguar's archives. In an era like the one we're in now, the Jaguar Lightweight E-Type hits you like a slap in the face. Jaguar Heritage, a section of Jaguar Land Rover's new Special Vehicle Operations (SVO) division, took on the task of researching the original Lightweight E-Types and developing the methods to create new ones. Every aspect of the continuation Lightweight E-Type, from the development of the tools and molds used to build the cars, to the hand-craftsmanship, reflects doing things the hard way. They may not build them like they used to, but with these six special E-Types, Jaguar comes awfuly close, if not better. Working alongside the design team, Jaguar Heritage made a CAD scan of one side of an original Lightweight E-Type body. That scan was flipped to create a full car's worth of measurements. That ensured greater symmetry and better fit than on the original Lightweight E-Types (which could see five to ten millimeter variance, left-to-right). The scan was also used to perfect the frame, while Jaguar looked through notes in its crash repair books to reverse-engineer the Lightweight E-Type's suspension. The team repurposed a lot of existing tooling for the continuation cars, and developed the rest from analysis of the CAD scan.

Ferrari exec to lead Jaguar North America

Jaguar has announced that Jeff Curry will be serving as the brand's new North American vice president, effective August 13. The move is a coup for Jag, which lured Curry away from his previous posting as VP of marketing for Ferrari North America, and is further evidence of just how strong Jaguar's comeback has gotten.
Curry has spent over 20 years in the auto industry, and has worked with Audi, SiriusXM and Land Rover, where he made his start in the industry. His primary responsibilities with Jaguar will cover marketing communications, customer relationship management, and product planning.
Jaguar Land Rover's North American president, Andy Goss, heaped praise on the brand's newest addition saying, "Jeff brings with him extensive automotive and luxury marketing experience, critical expertise in leading-edge technologies and a personal passion for automobiles."

The Jaguar XJR-15 is a 215 mph, barely-legal road car that's for sale

The late 1980s and early 1990s were awash with supercars from automakers across the globe. Classic Driver in the UK is selling one of the rarest of all of these supercars, the road-going racecar that is the Jaguar XJR-15. The XJR-15 is the lesser known sibling of the Jaguar XJ220. Only 27 were ever built. The XJ220 may not have received the same recognition and reverence as the Ferrari F40, the Porsche 959, and the McLaren F1, but for a time it held the record for the fastest road-going automobile, 217.1 mph. All of the XJ220's engineering and prowess is owed to the development of the XJR-15, which in turn owes everything to driver Tom Walkinshaw and his experience in touring and Le Mans racecars. Unlike the twin-turbocharged XJ220, the XJR-15 features a big, naturally-aspirated V12 that turned out 450 horsepower and 420 lb-ft of torque when new. The engine has a dry sump oil system, a Cosworth forged crankshaft, connecting rods, aluminum pistons, and fuel delivery from a Zytec electronically controlled sequential fuel injection system. The engine is mated to a five-speed transaxle from Tom Walkinshaw Racing, while the suspension - fabricated wishbones and horizontal pushrod-spring dampers at the front and coil springs at the rear - is pulled straight from the XJR-9 racecar. At the time, the car was capable of hitting 60 mph in under four seconds and topped out at 215 mph, just shy of the mark later set by the Jaguar XJ220. The XJR-15 was also the first road car to make extensive use of carbon fiber. In fact, at 2,315 lbs, the car's listed weight is less than that of a new ND Mazda Miata. The body was designed by future McLaren F1 engineer Peter Stevens. While the McLaren and Porsche were more complete and well rounded machines, the XJR-15 was a bare bones, uncompromised track machine. The interior was barely more than a carbon tub fitted with a pair of one-piece seats. The car in this listing is chassis number 21 and only has 1,400 miles on the odometer. Some minor modifications to the hinges allow the hood and engine cover to be quickly and easily opened. The car is listed for GBP450,000, or about $560,000. Not cheap, but what rare, early 1990s supercar is? Related Video: News Source: Classic Driver via Car Buzz Jaguar Coupe Performance ferrari f40 jaguar xj220