Wrecked 3.0l V6 235 Horsepower 3 Liter V6 Dohc Engine 4 Doors 4-wheel Abs Brakes on 2040-cars

Auto blog

Jaguar explains the perfect driver seating position

Although the shapes of car seats are one-size-fits-all, manufacturers have created numerous ways to customize how seats are positioned in efforts to cater to the multiple sizes of drivers. Whereas old vehicles only had the options of reclining and sliding forward or backward, new cars have seats that move up, down, forward, backward, and just about any other direction. In a new video, Jaguar demonstrates exactly how to use these features to find the perfect seating position. The advice comes from Steve Iley, Jaguar Land Rover's chief medical officer. Many people only think of seating position as a means to comfort, but when dealing with posture, it can affect a person's health. Iley's first tip is to empty out your pockets, thus avoiding any impingements. That includes anything from wallets to keys to cellphones to stowed-away snacks. Before putting a seatbelt on, the driver should then make sure his or her butt is all the way to the rear of the seat and that the entire back is touching the seat. Next are the seat adjustments. Iley suggests moving the back of the seat until the driver's spine and pelvis are aligned and straight. Note in this position the driver's thighs should be resting on the seats without any pressure points. Following this step, check the distance and position of the feet relative to the pedals. Jaguar says in the correct position, the leg should still be slightly bent when a pedal is fully pressed. The driver's elbows should be in a similar slightly bent position. With both hands on the wheel, make sure the arms aren't straight and have a slight kink at the elbow. In an ideal position, the driver's shoulders should remain in contact with the seat even during turning. Last, the headrest should be aligned with the top of the head. Not mentioned in Jaguar's advice is that NHTSA urges you to sit at least 10 inches from the steering wheel — as far back as you can while still comfortably reaching the pedals and wheel — in order to minimize the potential for serious injuries from airbag deployment, and the old 10-and-2 hand position is discouraged for the same reasons. Hands at 3 and 9 or at 4 and 8 are the new norm. AAA demonstrates in the video below. If any part of this doesn't make sense, you're in luck. Both videos are helpful. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Jaguar brings the new XKSS to Jay Leno's Garage

Jay Leno is no stranger to the Jaguar XKSS, having driven Steve McQueen's no less. But that doesn't mean he would turn down a chance at another one, and certainly not the continuation model seen in this week's Jay Leno's Garage. This particular XKSS is the first of nine cars built to complete the car's original 1957 production run, which was cut short in a factory fire. The video covers many of the fascinating details that went into recreating the XKSS. Among them are Jaguar's acquisition of an original D-Type engine block to make new castings, and even replicating the type of type of steering wheel used back in the day. Most of the vehicle is made to be identical to the originals, with only a few changes made for usability. This includes better quality materials for the brake lines, and ethanol-resistant materials for the fuel tank. Because this particular XKSS was on its way to the LA Auto Show (where we saw it debut at the Petersen Museum), Leno didn't get a chance to take it for a spin. However, snippets of his drive in McQueen's car were added, since it's the same car for all intents and purposes. What Leno emphasizes is how modern the car feels, also noting that it feels lighter than many other classic Jaguars. To see all the details and impressions, check out the video above. Related Video:

All-electric Jaguar XJ coming soon on platform shared with 'Road Rover'

We've been posting on the likelihood of electric Jaguars for a while now, especially the XJ leading the charge as a new EV flagship. Rumors at the beginning of 2018 predicted an XJ EV on our doorstep by the end of 2018, the 50th anniversary year of the XJ. By April this year, it was looking like the battery-powered XJ would use the I-Pace platform and make an appearance sometime in 2019. Now, Automotive News Europe reports that during Jaguar Land Rover's Investor's Day presentations, the automaker said it would debut a "large SUV and a large premium sedan" on its Modular Longitudinal Architecture (MLA) suitable for EVs, hybrids and traditional ICE-powered cars. The sedan in question is the next-gen XJ. Nick Rogers, JLR's product engineering boss, said electric MLA vehicles will get 90.2-kWh batteries that return range of up to 400 kilometers (292 miles) on the European cycle. That would effectively be the same size battery as the I-Pace, which rides on its own one-off platform, and the same range; in the U.S., the I-Pace is rated at 234 miles. It's said the XJ's design, produced by former Jaguar design chief Ian Callum and his team, has already been cleared. It swaps the four-door body for a five-door, a la the Audi A7, and introduces a new design language for the car and the carmaker. Car and Driver says the new statement sedan aims to be "a cutting-edge alternative to the BMW 7 Series and Mercedes-Benz S-Class," and Autocar saying it will "remain Jaguar's flagship in preference to a large SUV, such as the rumored J-Pace." The point of introducing the EV first is to establish the car's technology and sporting credentials — hopefully before the Porsche Taycan and Audi E-Tron GT arrive. Eventually, an ICE version of the XJ powered by an Ingenium inline-six should come; that will welcome buyers not ready to make the all-EV switch, a necessary move in keeping with the XJ's competition for global sales with the S-Class and 7 Series. However, leaving room in the design for a conventional drivetrain will force compromises that the all-electric competition doesn't face. Production of the current XJ ends at the Castle Bromwich facility on July 5. The new sedan is slated to be "announced in the near future" and built at JLR's plant in Solihull, which assembles Land Rover products. The same MLA platform will support a road-focused Land Rover as a sibling to the XJ, dubbed the "Road Rover" internally.