Series 1 Roadster #matching New Floor & Trunk Panels Needs Full Resto 1966 1967 on 2040-cars

Auto blog

Eagle Lightweight GT meticulous Jaguar restomod is 'the best an E-Type can be'

England claims so many boutique, specialist car companies doing such sensational work that if an artist were to draw a national muse for Britannia, she would hold a scepter in one hand and a gear shift in the other. Next up in the island's crowded showroom of posh vehicular gems, Eagle presents its Lightweight GT. The slinky coupe started as a Series 1 Jaguar E-Type (built from 1961 to 1968), then, after 8,000 hours of work in the chrysalis of Eagle's East Sussex workshops, the coupe emerges as a modern and much more comfortable version of Jaguar's factory Lightweight racers from 1963. Some context: After Jaguar stepped away from racing in the late 1950s, the company decided to convert 25 incomplete D-Type chassis into the road-legal XKSS roadster. Come 1962, with the D-Type and competition still on its mind, Jaguar toyed with its new E-Type road car to create the Low Drag Coupe for competition. The factory built just one, powered by a mightier version of the 3.8-liter straight-six in the E-Type that used a wide-angle cylinder head designed for the D-Type. The next year, Jaguar's racing fancy expressed itself in the E-Type Lightweight, still harking back to the D-Type with all-aluminum bodywork and an aluminum block for the 3.8-liter. The automaker planned to fabricate 18 Lightweights, but only got around to building 12. The Lightweights didn't dominate any of the big races, but privateers put them to effective use in smaller series. Their pedigree, aura, and multi-million-dollar valuations convinced Ford to debut an Advanced Lightweight Coupe Concept at the 2005 Geneva Motor Show, and in 2014 convinced Jaguar to complete the six remaining cars in the 18-car build.      Enter Eagle. After its Speedster, Low Drag GT and Spyder GT, the firm calls the Lightweight GT the answer to the question, "What’s the best an E-Type can be?" The hand-formed aluminum skin takes 2,500 hours to shape, revised slightly for better aerodynamics and comfort. A deeper ramp angle in front leads to deeper side sills, which bolster chassis stiffness, and with a lower floorpan, put the driver lower in the car and give him more headroom. Larger wheel arches fit 16-inch magnesium alloy versions of the peg-drive wheel Dunlop introduced in 1954, an inch larger than the wheels on the original Lightweights, and aluminum, three-eared knock-offs. There's steeper rake to the windshield and backlight.

Jaguar flagship J-Pace crossover due in 2021

We've been talking about a Jaguar J-Pace crossover for four years. In 2016, the large luxury SUV version of the XJ sedan was expected to arrive this year and challenge the Audi Q8, BMW X7, and Mercedes GLS. More recent information from Autocar put the J-Pace's length at roughly 4.9 meters (193 inches), putting the English offering in a bracket with the Mercedes-Benz GLE and the Porsche Cayenne. Dynamics will be the priority, with the J-Pace intended to "beat the Porsche Cayenne at its own game." The Jaguar will supposedly do this with a novel hybrid powertrain arrangement on the launch vehicle. The new Ingenium turbocharged inline-six, expected to be the "mainstream" engine, will turn the front wheels, the rear axle turned by an electric motor. That setup will provide more interior room thanks to the lack of a center tunnel, as well as finer control of torque to the rear wheels for better bad-weather and soft-roading character. Autocar said electric and four-cylinder versions were possible although not confirmed. The magazine said traditional gasoline and diesel versions without the electric motor out back would likely come only in two-wheel drive. However, not only is the phrase "front-wheel drive Jaguar" a terrifically un-sexy string of words, but the Modular Longitudinal Architecture (MLA) platform has supposedly been developed for rear-wheel- and all-wheel-drive cars. The Premium Transverse Architecture (PTA), an evolution of the aged D8 platform, supports the Range Rover Evoque, but all JLR products are planned to migrate to the MLA by 2025. The MLA will come in high-rise, mid-height, and low-rise versions. Products like the coming Range Rover and Defender will utilize the high-rise version. The J-Pace will use the mid-height MLA, along with the rumored Road Rover. The Jaguar F-Pace and Range Rover Velar take the low-rise PLA. These tiers would put a J-Pace roofline beneath the six-foot-two-inch-tall Range Rover and make for a sleeker appearance. Autocar also says that the J-Pace will have more luggage capacity than the Range Rover, quite the trick since the Jaguar won't be as tall and will be around six inches shorter. If it arrives in 2021, the shape could define the next stage in Jaguar design; the next-generation F-Pace has been predicted for 2022, so it could fall into line established by the big brother.

Jaguar F-Pace snapped inside and out

We've seen the Jaguar F-Pace undergoing testing before: at the Nurburgring, in the snow, and wearing a variety of different bodywork as development has progressed. But we've never seen it this close, and we've never seen it inside, until now. This latest batch of spy shots shows Coventry's new crossover out on the road undergoing warm-weather testing in what looks like Spain. It's tellingly parked in between a Jaguar XE and Range Rover Evoque, the gap between which the F-Pace is expected to bridge. It's still wearing heavy camouflage, of course, but this is our first glimpse inside the cockpit. The cabin rather similar to the one on the new XF sedan – and hardly any more upright, either, which tells us a bit about the handling character Jaguar is going after with the F-Pace. Expect to see the finished product at the Frankfurt Motor Show this coming fall – the same show where it unveiled the C-X17 concept two years ago to preview its arrival. Related Video: