2002 Isuzu Axiom on 2040-cars

Auto blog

Junkyard Gem: 1994 Isuzu Rodeo 4WD

After a decade in which Isuzu-built Chevrolet LUV pickups, Isuzu-engined Chevrolet Chevettes and Isuzu Geminis with confusing "Opel by Isuzu" or "Buick/Opel Isuzu" badges, Isuzu finally began selling Americans its vehicles with Isuzu badging in the early 1980s. There were Isuzu cars, sure, but the P'up pickup and (starting in 1984) the Trooper SUV showed that Isuzu was likely to rake in the most yen by selling trucks on this side of the Pacific. The three-door convertible Amigo appeared here in 1989, but it was a little too small and silly to sell much among the suburban-commuter set. For the 1991 model year, a five-door Amigo sibling showed up: the Rodeo. The early Rodeo is getting quite rare today, but I was able to find this fairly clean '94 in a Denver-area self-service yard a few months back. These trucks, which were based on the same chassis as the P'up (known as the Isuzu Pickup after 1987) sold well in Colorado. You could get the first-generation Rodeo with rear-wheel-drive, but the four-wheel-drive version made more sense if you wanted to slog through snow and mud in the Rockies (or just feel safe when crossing a parking lot dusted with the white stuff). This truck has true four-wheel-drive, not what eventually became known as all-wheel-drive, but at least the higher trim levels had automatic locking hubs instead of the manual sort that forced you to stop and kneel in the mud to switch. Americans loved automatic transmissions nearly as much in 1994 as we do today, but they cost a lot more relative to manuals back then. This truck has a five-speed manual. The MSRP on this truck was $19,249, or about $39,075 in 2022 dollars. If you wanted it with an automatic transmission, the price went up to $20,349 ($41,310 today). The air conditioning in this one cost an additional 850 bucks (1,725 bucks now). The engine is an Isuzu 3.2-liter V6, rated at 175 horsepower. This truck was built at Subaru-Isuzu Automotive in Indiana; Subaru eventually bought out Isuzu's share of the joint venture and now only Subaru models are built there. Just to add another manufacturer to the mix, Honda sold rebadged Rodeos with Passport badges (and rebadged Troopers as Acura SLXs). This one was well-cared-for, looking clean for a machine with close to 200,000 miles on the clock. We can assume that some costly mechanical ailment finally sent it to this, its final parking place.

Mazda and Isuzu to collaborate on a new pickup truck

After decades, Mazda has finally untangled itself from its relationship with Ford. The last vestige of that partnership is the BT-50, a rebadged version of the global Ford Ranger pickup truck. Once the BT-50 ends production, Mazda has announced that it will collaborate with Isuzu to develop its next generation of pickup trucks. The BT-50 was co-developed with Ford's Australian division. In their current iteration, the BT-50 and its Ranger twin were never on sale in the United States. Mazda's last pickup in the US was the B-Series, itself also a rebadged version of the old Ford Ranger. Isuzu pulled out of the US passenger vehicle market in 2009, although it still sells commercial vehicles here. Isuzu, continuing a long and complicated relationship with General Motors, co-developed the diesel engine that currently powers the Chevrolet Colorado and GMC Canyon. In select markets, Isuzu sells a rebadged version of the Colorado as the D-Max. Details on the Mazda/Isuzu tie-up are scarce. A single press release simply says "Isuzu will produce next-generation pickup trucks for Mazda, based on Isuzu's pick-up truck model." This isn't the first truck collaboration between the two companies. Since 2004, Mazda has sold the Titan, a rebadged version of the Isuzu Elf commercial truck. The Elf is sold in the US as the Isuzu N-Series. Those in the US hoping for a new competitor in the midsize-truck segment shouldn't get their hopes up for the new truck. There are currently no plans to bring them here. There is hope, though, that Ford will bring the Ranger replacement stateside sometime in the next few years. Related Video: News Source: MazdaImage Credit: WILLIAM WEST/AFP/Getty Images Isuzu Mazda Truck

16 things I learned about the Isuzu VehiCROSS

There are plenty of cars I remember existing, but actually know very little about due to the passage of time or just not particularly caring when they were new. Take the Isuzu VehiCROSS, which I fondly recall as this wackadoo off-roader from the late 1990s and early 2000s. But honestly, that's about it. So, since I've got a little extra time kicking about, I decided to fall into the rabbit hole labeled Isuzu VehiCROSS for an hour to see how much I could find out about this SUV (or "sport/utility" in 1999 parlance) that shared labeling with the watch I wore in 1999. Enjoy. 1) The VehiCROSS was not based on the Rodeo, as I always assumed, but rather the Trooper RS. Oh, so that bigger, boxier Isuzu they turned into an Acura? No, no, no. The RS was the two-door Trooper, and specifically the second-generation two-door Trooper, which I just discovered was a thing. And what a gawky, dorky, that-has-to-be-Photoshopped thing it was. Apparently, the Trooper RS was sold in the United States from 1993 to 1995, and in very small numbers. That is not surprising. 2) It was probably obvious, but the VehiCROSS was based on a concept car. Specifically, a concept car shown at the 1993 Tokyo auto show.  3) The quick turnaround from concept to its Japanese market introduction for 1997 was the result of some innovative manufacturing methods at the time (it arrived in the United States in 1999). According to the Motor Trend first drive, "There would be no time-consuming clinics, no 'courtroom drama' with the finance department, and to oversee the project, a 'Zip Team' consisting of 15-20 members was given the task of developing the vehicle in about half the normal time." Among its accomplishments, the team came up with a way to more quickly and cheaply produce the VehiCROSS' unique body pieces. Again according to Motor Trend, Isuzu used carbon stamping dies inside of the conventional cast iron dies. Though the carbon could be used far fewer times and result in a reduced overall capacity, they cost one-third to one-half as much and could be made in about six weeks – the cast iron ones would take four months and run about $1.5 million in 1990s dollars. Isuzu estimated they'd only be able to produce 2,400 VehiCROSSes per year until the carbon dies wore out. Then that would be it. According to sales data on Wikipedia, Isuzu managed to sell 2,005 in the U.S. alone in year 1 and 4,153 in total. In Japan, there were 1,805 sold in total.