2017 Infiniti Qx80 Limited on 2040-cars

Auto blog

2018 Infiniti QX80 reveals fresh face in Dubai

Infiniti has finally revealed its refresh for the Infiniti QX80 at the Dubai auto show, and it's amazingly mild. Not that we were expecting a particularly wild redesign, since even the QX80 Monograph concept that previewed the SUV still looked similar to the existing vehicle, but this is still a pretty low-key update. The main changes are in the front fascia, which was teased not long ago. It features headlights that sit higher up and inline with the top of the grille. The lights are more slender and swept back, too. The tops of the fenders sit higher as well, providing a more squared-off look, and the side fender vents have a new design. Beyond the nose job, there are hardly any other changes. The taillights are new, and the chrome finish over the license plate extends into them. The rest of the roof, doors, windows, basically all the stuff in the middle of the SUV look pretty much identical to the old QX80. Underneath the skin is more of the same. The interior is the same with the exception of some new materials and colors. Apparently the shift knob is new, too. The powertrain is a carryover as well, featuring the same 400-horsepower 5.6-liter V8 with either two- or four-wheel drive. The QX80 has one other somewhat noteworthy change, and that's the price. Base price on the two- and four-wheel-drive QX80 models increases $900 over last year's to $65,745 and $68,845 respectively. The new QX80 goes on sale by the end of this year. Related Video: Featured Gallery 2018 Infiniti QX80 View 27 Photos Image Credit: Infiniti Infiniti SUV Luxury dubai motor show infiniti qx80

Mercedes and Infiniti confirm joint production in Mexico [w/video]

It's official, folks: After initial reports last week indicated that Mercedes-Benz was preparing to begin assembly at the Nissan plant in Aguascalientes, Mexico, the two parent companies have announced just that. Only instead of using the existing Nissan plant at the site (in operation since 1992), Daimler and the Renault-Nissan Alliance have announced a joint venture to build a new one alongside it.
The latest stage in the growing French-German-Japanese collaboration is part of a new collaboration that will see Infiniti and Mercedes jointly develop and build a line of compact premium vehicles, with the first Infiniti models set to roll off the assembly line in 2017 and the first Benzes to follow a year later. Neither party announced exactly which models that would encompass, but Mercedes already has a robust line of small vehicles (including the A-Class, B-Class, CLA and GLA), and Infiniti has long been toying with the idea of slotting in something smaller below the Q50.
The billion-euro project, split evenly between the two industrial giants, is set to create 5,700 new jobs in Mexico. In addition to the Aguascalientes project, Infiniti and Mercedes are also undertaking joint production of four-cylinder engines (initially for the C-Class and Q50) in Decherd, Tennessee, from which they will be exported around the world. By the time the new factory in Mexico reaches full capacity in 2021, it will have the capability to produce 300,000 vehicles annually. That's on top of the 850,000 vehicles the existing facility is capable of handling.

Infiniti's new VC-T changes the rules of small turbocharged engines

The upcoming Infiniti QX50 crossover does not get our pulse racing, no matter how shapely the QX Sport Inspiration concept that previews it may be. No midsize SUV does, to be fair. But it has something special under the hood – the world's first production variable-compression-ratio engine. That means the QX50's 2.0-liter turbo four, which makes 268 horsepower and 288 pound-feet of torque, will have up to 27 percent better fuel economy. Here's how it works. The trend of moving to smaller, turbocharged engines carries with it one big falsehood. Under low load when the turbo isn't needed, these engines are less efficient than an equivalent engine without a turbo because of the low compression ratio the turbo requires. That is, if you never need the extra power, you're wasting fuel. Turbocharged (and supercharged) engines use a lower compression ratio to prevent detonation. When you force extra air in a cylinder and mix it with fuel, it's more likely to prematurely go boom. Lowering the compression ratio prevents this problem, but it's less efficient. Infiniti's VC-T promises the best of both worlds, with a compression ratio that ranges from 8.0:1 for high-power turbo needs to a 14.0:1 ratio for fuel-sipping efficiency. At its heart the VC-T engine is a simple idea, but it's complicated to explain. Consider yourself warned. The photo below from Infiniti serves as a good visual overview. For the truly nerdy, this patent application covers the mechanical concept. Instead of having the pistons connected to the crankshaft, Infiniti's engine has a pivot arm with a connection on each end. One end connects to the piston, the other connects to a second lower shaft, which is controlled by an actuator arm. At any given time the engine's pistons move up and down according to the lobes on the crankshaft. But the actuator arm can change the angle of the pivot arm up and down. That is, the pistons still move in the same motion with the same stroke, but phase the entire stroke up or down. Move the pivot up and there's less room at the top, which means a higher compression ratio. Move the pivot down and the compression ratio goes down, too. As an added bonus, the lower shaft eliminates the need for counter-rotating balance shafts. Infiniti says this system works constantly and can vary the compression ratio to any number between 8:1 and 14:1. It also uses electronic variable valve timing on the intake valves to switch into Atkinson-cycle combustion for greater efficiency.