2005 Infiniti Qx56 on 2040-cars

Auto blog

Infiniti Q60 Project Black S packs F1-derived hybrid twin-turbo V6

At the 2017 Geneva Motor Show, Infiniti unveiled the Project Black S, a souped-up version of the Q60 coupe that packed technology derived from the Renault Sport Formula 1 Team's race cars. Details were scarce. Aside from some F1-inspired bodywork, all we knew was that the twin-turbo V6 would be paired with a kinetic energy recovery system, or KERS for short. At next week's Paris Motor Show, Infiniti is bringing a new concept that's a bit more polished as well as some additional details about what rests under the hood. The car is still dubbed the Infiniti Project Black S. The car still packs a twin-turbocharged 3.0-liter V6 paired with an energy recovery system. Infiniti claims the car makes 563 horsepower, up from 400 in the Q60 Red Sport 400. The Project Black S should hit 60 mph in fewer than four seconds. The powertrain uses three motor generator units (MGU) and a single MGU-K that harvests brake energy. Two electric turbochargers harvest heat energy from the exhaust, meaning the car can gain energy both under braking and acceleration. Visually, there's not much that's changed from last year's Geneva concept. We only have one new photo, but to our eyes the only difference is a few yellow accents on the front bumper. We'll have to wait until next week's reveal for more photos. Related Video:

2022 Infiniti QX60 spied running around post-Monograph Concept reveal

Infiniti recently revealed the QX60 Monograph Concept, a concept crossover meant to preview the next generation QX60. Today, the first spy shots of the QX60 in production form hit our desks. There’s a whole lot we canÂ’t see under the camouflage, but it looks fairly representative of what we expect a production version of the Monograph Concept would look like. The headlights, grille design, lower opening and side air intakes all look like they were pulled straight off the concept. It also has the same hood design with raised outer edges that lead right into the A-pillar. Its droopy side camouflage does a good job of disguising its curvaceous profile and pronounced rear fenders. We can see a hint of widening at the rear fenders, and we hope that the MonographÂ’s look is translated over to production there. The mirrors were moved further down onto the doors, and the flush door handles are done away with. This tester appears much less flamboyant with normal-size wheels replacing the giant and dramatic spinners on the Concept (gallery of the concept below). Infiniti QX60 Monograph View 36 Photos Infiniti is copying the shape of the rear over to production. We can clearly make out the raked rear window, overhanging spoiler and rounded shape of the back end. The taillights are a bit difficult to see, but their general design matches up to the Concept. As for the fancy chromed exhaust area on the concept, those spots appear flat and barren on this preproduction model. ItÂ’s still heavily covered in camo, though, so we donÂ’t yet know what the rear bumper design will look like in its final form. The production QX60 is set to be revealed next year where it will likely go on sale as a 2022 model year car. ItÂ’s unclear what powertrain(s) will be lurking under the hood, but at least we know the production version wonÂ’t stray terribly far from the concept now. Related Video:

Infiniti QX30 Concept is ready to join the compact crossover fray

Today, the compact crossover market is an automotive Klondike. Automakers are scrambling to stake their claim on an increasingly segmented, increasingly valuable landscape. That's especially true in the premium market, where every Audi Q3, BMW X1, Mercedes-Benz GLA, Lexus NX and Buick Encore sold takes up a piece of market share that requires a great deal of effort for another automaker, in this case Infiniti, to reclaim. That makes the new QX30 Concept, debuting this week at the 2015 Geneva Motor Show, an extremely important vehicle for the Nissan-owned brand. The QX30 Concept has already been "earmarked for production" and will be launched next year, according to Infiniti. When that happens, we'll see a compact CUV with toned down styling from the vehicle shown here, much like the upcoming Q30 production model. It's fair to say the looks of the QX30 are in direct opposition to those of the aforementioned Lexus NX. Where that car is sharp and angular, Infiniti's designers emphasized the "spontaneous and fluid" look of the new concept. Infiniti's most recent, Q50-inspired design language works nicely in a compact CUV form factor. The double-arch grille and its flanking headlights give the QX30 a refined, almost predatory look. That, as it turns out, is intentional. "The Q30 Concept was like a panther, lithe and slender. We transformed the QX30 Concept into a mountain lion, strong and muscular," Infiniti's Executive Design Director Alfonso Albaisa said in a statement. The strong, wavy character lines in the profile lead into the short, chopped rear overhangs. Above the beltline, the rear window is raked forward aggressively, lending the QX30 a coupe-like profile. In the cabin, we can already see the makings of a production car's interior, with two strong material choices – dark brown and blue leather – highlighting the dash. On the concept, purple accent lighting is emitted from the center stack's controls, while the violet shade carries over into what looks like a digital instrument cluster and the speaker surrounds in the doors. Sections of quilted leather on the seats, meanwhile, look very nice, but we doubt they will make it to production on what is ultimately going to be a reasonably priced vehicle.