2018 Infiniti Q50 3.0t Luxe Sedan 4d on 2040-cars

Auto blog

Infiniti Q50 Eau Rouge gets the heart of a GT-R [w/video]

There has been ongoing talk of an Infiniti using the Nissan GT-R powertrain practically since the moment the Nissan's flagship sports coupe hit the road. While the rumors have gone back and forth over the years, they have never completely gone away. It seems Infiniti is finally turning an ear to the screams of its most vocal enthusiasts with an updated version of the Q50 Eau Rouge concept boasting a modified version of Godzilla's engine and all-wheel drive system debuting at the 2014 Geneva Motor Show. It's even taking things a step further and granting it a new, seven-speed transmission to replace the Nissan's six-speed.
The latest evolution of the Eau Rouge packs the same 3.8-liter, twin turbocharged V6 found in the GT-R but with a unique tune of 560 horsepower and 443 pound-feet (600 Newton-meters) of torque. That makes it 15 hp more powerful than the standard 2015 GT-R but gives up 20 lb-ft of torque. Power gets to the ground through the GT-R's all-wheel-drive system. Infiniti predicts that the Eau Rouge would sprint to 60 miles per hour in less than 4 seconds and on to a top speed of 180 mph.
According to Infiniti Communications Senior Manager Kyle Bazemore in an email to Autoblog, the modded GT-R powertrain was not the only choice for the Eau Rouge. It also considered "developing a high-power sports diesel" and hybrid versions with an electric supercharger. However, "this was the clear solution for this concept car," Bazemore said. Other than the drivetrain, the Eau Rouge in Switzerland is identical to the one shown in Detroit. Sadly, it is not confirmed for production; so we might not be getting the fabled Infiniti GT-R sedan any time soon. Still, we can hope.

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.

Nissan looking to expand UK plant to build Infiniti Q30

With the Infiniti Q30 concept heading to the Frankfurt Motor Show next month and a future premium compact model heading into production at Nissan's Sunderland UK assembly plant, just connecting the dots tells us this new small Infiniti is headed for UK production. Backing this up, Reuters is reporting that Nissan is looking to expand the Sunderland plant by 25,000 square feet, while Automotive News Europe takes it a step further by almost confirming that the Q30 will be built alongside the Nissan Qashqai and Note.
The reports say that Sunderland is already the UK's biggest automotive plant, but the expansion will make it even larger with production capacity expected to rise from the current 500,000 units built each year to more than 550,000. There is no indication if the expansion will bring more jobs to the plant, which already employs around 6,000 people.