2013 Infiniti M37 Private Seller 18k Miles No Reserve Naviga Premium Package on 2040-cars

Auto blog

Nissan recalls 226k vehicles over airbag inflators

Nissan and Infiniti are the latest automakers to issue recalls involving faulty airbag inflators from Takata. The Japanese automakers have announced campaigns covering about 226,326 units from seven models built in the early 2000s because they contain the bad part in the passenger-side, front airbag. The affected vehicles include the 2002-2004 Nissan Sentra, 2002-2003 Pathfinder and 2002-2003 Maxima, and it also covers the 2002-2003 Infiniti QX4, 2002-2003 I35, 2003 FX45 and 2003 FX35.
Like the other vehicles with the faulty inflators, it's possible for the part to rupture during airbag deployment and spray metal shrapnel at occupants. Nissan and Infiniti have even included vehicles with replacement airbags in this campaign because those parts also could have been defective. Both companies were also part of the earlier regional campaign to fix cars in high-humidity climates where the problem has been found to be the worst.
As is the usual response, Nissan and Infiniti will notify owners of the affected vehicles and will make the repair at no charge. According to the filing with the National Highway Traffic Safety Administration, these fixes will commence around August 11. Scroll down to read the report from NHTSA, or read the full defect notice as a PDF, here.

Nissan recalls Rogue, Pathfinder, Infiniti QX60 for seat issue

Nissan and Infiniti are recalling their 2023 Rogue, Pathfinder and QX60 SUVs and CUVs to address a potential defect in their seat frame welds that can allow the frames to fail in the event of a collision. The number of vehicles that potentially shipped with weak welds is rather small — just over 12,000 — but the issue could nonetheless lead to injury if a failure occurs during a collision.  "The driverÂ’s powered seat may not be fully secured to the seat frame on certain Nissan Rogue, Pathfinder, and INFINTI QX60 vehicles," Nissan's report to NHTSA said. "As a result of this issue, the seat frame welds may detach from the rear inboard seat bracket. If this condition occurs, it may increase the risk of injury to the occupant in the event of a crash. In addition, the seat frame assembly may not meet certain FMVSS 207 and FMVSS 210 requirements because of this condition," Nissan said.  Nissan says there's no easy way for customers to detect the issue ahead of time, and that its seats need to be inspected by a service tech to see whether it is properly secured. Dealers will be instructed to check the driverÂ’s seat rail clearance to the inboard seat bracket, and if necessary, the dealer will remove and replace the affected driverÂ’s seat cushion frame, NIssan said. The entire procedure should take less than two hours.  Owners of affected vehicles should look for notices to be delivered no later than June.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Recalls Infiniti Nissan Crossover SUV Luxury

Infiniti delays fastback-like QX55 crossover until late 2020

Infiniti confirmed it has delayed QX55 production by about five months. The as-yet-unveiled crossover is a swoopier, more stylish evolution of the QX50 with a fastback-like roof line inspired by some of the company's past models. The Nissan-owned company informed its suppliers production will start in November 2020, not in June as previously announced. It explained it needs to "ensure production capability" at the Aguascalientes, Mexico, facility that will manufacture the model. It didn't provide additional details, though a spokesperson confirmed the new timeline to Automotive News. The factory — a joint-venture between Mercedes-Benz parent company Daimler and Nissan — also makes the QX50, the A-Class, the Kicks, and the Sentra, among other models. "Production schedules are internal and due to various operation priorities can move — sometimes forward, sometimes backward — as a normal course of business," a spokesperson told Autoblog.  The QX55 is based on the aforementioned QX50, and spy shots confirm the two models share several design cues when viewed from the front. Minor nameplate-specific details will set the 55 apart from the 50. It's a different story out back, where the 55 ditches the 50's family-friendly silhouette for a fast-sloping roofline penned with an eye on the first-generation FX released for the 2003 model year, five years before the original BMW X6.  Infiniti is not yet revealing technical specifications, but we expect the variable-compression VC-Turbo engine will be one of the available powertrains. The turbocharged, 2.0-liter unit makes 268 horsepower and 280 pound-feet of torque in the QX50. It also returns 26 mpg in combined driving, according to the EPA. What remains to be seen is whether the delay also affects the car's unveiling date, which hasn't been publicly announced yet. An Infiniti spokesperson told Autoblog the QX55 is scheduled to make its debut "in the next few months," and pointed out it's one of five new models due out in the next three years. When it does arrive, the Infiniti QX55 will compete in the same segment as the BMW X4 and the Mercedes-Benz GLC Coupe.