Absolutely Loaded! Power Everything! Leather! Check Out This Beautiful Ride!! on 2040-cars

Auto blog

Nissan, Infiniti issue recall for replacement Takata air bags in older models

Nissan and Infiniti are recalling older vehicles that were repaired after collision damage to address problems with Takata replacement air bag inflators that were potentially installed. The overall campaign population is difficult for Nissan to pin down because the only vehicles impacted would be those that Nissan and Infiniti know to have been serviced with the replacement units in question. Officially, the recalled population numbers just 375, but Nissan says more than 18,000 cars could have the defective parts installed.  Drivers of 2001-2003 Nissan Maximas, 2002-2006 Nissan Sentras, 2007-2012 Nissan Versa Sedans/Hatchbacks, 2002-2003 Infiniti QX4s and 2006-2010 Infiniti M35s/M45s that had their vehicles repaired after a collision or theft should be aware that these deadly replacement parts may have been used.  "The potentially affected inflators may have been installed on vehicles after final remedy repair completion under the vehicle recalls as part of a subsequent theft or collision repair," Nissan's notice said. "Vehicles that received the subject parts prior to December 9, 2016, are not affected as they would have been subsequently included in the final remedy recalls and replaced with a final remedy driver and/or passenger air bag inflator. Nissan has identified 18,422 vehicles that may have had these parts installed during service." The air bag inflators in question were inadvertently shipped to service inventory between December 9, 2016 and November 12, 2021 — after the dangers of Takata's inflator design were known to the industry. Notices are already being mailed; owners will be asked to bring their cars in for inspection, and if defective parts are found, they will be replaced.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Infiniti Q50 steer-by-wire system took 10 years to develop [w/video]

Infiniti's Direct Adaptive Steering (DAS) is quite a novelty - the system employs no physical connection between the steering wheel and the front wheels under normal circumstances and instead relies on a computer, clutch and steering-angle actuator to guide vehicles down the road with input from the driver.
In our First Drive review of a 2014 Infiniti Q50 equipped with the system, we weren't overly impressed by the artificial feedback. But we can't help but be impressed with how long Infiniti spent on its development: a full 10 years, according to Autoline Daily in the video report below. A staggering 70 percent of the research and development time spent on DAS was devoted to getting the steering feel right, and unfortunately, our first impression suggests their results still leave something to be desired, as we found it lacked the sporty feeling a sport sedan should have.
The weight of DAS is comparable to that of a conventional steering system due to its complexity. For example, three ECUs are used in the first-generation DAS system to ensure there's never a loss of steering, but Infiniti is refining the technology and is working to simplify it to reduce weight. One day Infiniti hopes that only one ECU will be needed to control DAS. We just hope it doesn't take the Japanese automaker another ten years to get the steering feel right.

Infiniti Q Inspiration Concept shows its face

Update: Infiniti released a second image of its Q Inspiration Concept with a press release about sales. We're not sure why, but we're not complaining and have added it above. The original rear three-quarter image is below in the text. Following a teaser image and some cryptic hints from designers, Infiniti has mostly revealed its concept for the Detroit Auto Show. It's called the Q Inspiration Concept, which for having "inspiration" in the name, is actually a rather uninspired name. But that's OK, because what it lacks in clever naming it makes up for in a beautiful fastback body. When the teaser was released, one of the designers mentioned the car would have a "long cabin," and that's no exaggeration, as the greenhouse reaches nearly to the tail edge of the car. It's a roofline that is highly reminiscent of the Audi A7. And as such, it would make a lot of sense for this Infiniti to be a hatchback, too, especially if it reaches production. We can't say for sure if this concept has a hatch, though, since there are some panel gaps at the base of the D-pillar and the Tesla Model 3-style rear pane of glass suggests this concept is technically a sedan. Unlike the Audi A7, the rest of the Infiniti is as curvy as the roof. There's hardly a crease anywhere, and it looks muscular with the big bulging front and rear fenders that flow effortlessly into each other. The clean exterior is accented by a lack of exterior door handles and what look to be cameras for side mirrors. The contrast to the organic curves comes from the nose and the wheels. The area where the grille would be is more chiselled and aggressive than the rest of the body. The wheels also have hard edges and lots of complicated elements that don't quite fit the organic theme of the rest of the car. Still the car overall is very striking and graceful. The press release continues to emphasize new powertrains, proportions, and the future design direction of Infiniti. As such, we suspect that this car uses, at minimum, a version of Infiniti's variable-compression engine, and more likely features extensive electrification, if not a pure EV powertrain. The lack of a large opening at the front would seem like further evidence the car utilizes electricity at some level. The car will make its full debut on Jan. 15. Related Video: Image Credit: Infiniti Green Detroit Auto Show Infiniti Hatchback Luxury Sedan 2018 detroit auto show