Infiniti 2008 Silver G35x Awd, 68,000 Miles. Well Maintained By 1 Owner. Clean on 2040-cars

Auto blog

Massive Airbag Recall Affects Seven Automakers

The recall of faulty airbag inflators supplied by Takata has exploded today to grow to seven automakers. In most cases, only models in certain high-humidity regions were affected because the National Highway Traffic Safety Administration found in its investigation that moisture played a role in determining whether there would be a problem. However, some companies opted for national campaigns. The exact number of affected models for these campaigns isn't yet known at this time. BMW is recalling an undisclosed number of 325i, 325Xi, 330i and 330Xi models from the 2001 through 2005 model years and the 2001-2006 model year versions of the 325Ci and 330Ci for the driver side and passenger side inflators. Only vehicles currently registered in Florida, Puerto Rico, Hawaii and the US Virgin Islands are covered under this recall. Neither Chrysler's filing with NHTSA nor its press release list the specific models affected, but a company spokesperson told Autoblog that at this time it only covers the driver and passenger side inflators for the 2006 Dodge Charger in Florida, Puerto Rico, Hawaii and the US Virgin Islands In most cases, only models in certain high-humidity regions were affected because the NHTSA found that moisture played a roll in determining if there would be a problem. Ford is recalling an estimated 58,669 cars that include the 2005-2006 model years of the Ford GT for the driver and passenger inflators, the 2007-2007 model years of the Mustang for the driver side and 2004 Ranger for the passenger side. It covers vehicles originally sold or currently registered in, wait for it... Florida, Puerto Rico, Hawaii and the US Virgin Islands. Honda is issuing three separate recalls regarding the problem. First, the company is recalling the 2002-2003 model years Civic, CR-V and Odyssey and the 2003 model year of the Accord, Element, Pilot and Acura MDX to replace the passenger's side inflator. This covers all models nationwide. Second, Honda is repairing the passenger's side airbag inflator in the 2003-2005 Accord, Civic, CR-V, Element, Pilot, the 2003-2004 model year versions of the Odyssey, the 2003-2005 model year Acura MDX and 2005 Acura RL. However, only for vehicles located in Alabama, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico and the US Virgin Islands. Owners will be notified in July. Finally, Honda is separately replacing some models' driver's side inflators.

Infiniti SUV recall marks latest chapter in Takata airbag saga

Automotive parts maker Takata is having a rough year with millions of vehicles equipped with its airbag inflators being recalled. However, it looks like there might still be problems with the company's quality control, if a new recall by Infiniti is any indication.
The Japanese luxury brand is recalling 1,912 total units of the 2013 Infiniti QX56 and 2014 QX80 in North America because of a manufacturing flaw with their Takata-supplied inflators for the driver's side front airbag. Of those, 1,848 are in the United States, according to the National Highway Traffic Safety Administration. Specifically, the outer baffle could be the wrong component and cause too much pressure to build up inside. According to documents submitted to NHTSA, it's possible in a crash for the part to rupture spraying metal shrapnel at occupants. At this time, Infiniti has not had any reports of this actually happening to drivers.
While this problem sounds nearly identical to the issue affecting millions of earlier vehicles, it must be noted that this is a different fault. According to the notice being sent to dealers on NHTSA's website: "This particular Voluntary Safety Recall Campaign is unrelated to two earlier campaigns that involved Takata passenger front air bag inflators on some older model Infiniti vehicles. This issue involves a much newer inflator and is a different, more isolated, Takata quality control issue."

2022 Infiniti QX60 spied running around post-Monograph Concept reveal

Infiniti recently revealed the QX60 Monograph Concept, a concept crossover meant to preview the next generation QX60. Today, the first spy shots of the QX60 in production form hit our desks. There’s a whole lot we canÂ’t see under the camouflage, but it looks fairly representative of what we expect a production version of the Monograph Concept would look like. The headlights, grille design, lower opening and side air intakes all look like they were pulled straight off the concept. It also has the same hood design with raised outer edges that lead right into the A-pillar. Its droopy side camouflage does a good job of disguising its curvaceous profile and pronounced rear fenders. We can see a hint of widening at the rear fenders, and we hope that the MonographÂ’s look is translated over to production there. The mirrors were moved further down onto the doors, and the flush door handles are done away with. This tester appears much less flamboyant with normal-size wheels replacing the giant and dramatic spinners on the Concept (gallery of the concept below). Infiniti QX60 Monograph View 36 Photos Infiniti is copying the shape of the rear over to production. We can clearly make out the raked rear window, overhanging spoiler and rounded shape of the back end. The taillights are a bit difficult to see, but their general design matches up to the Concept. As for the fancy chromed exhaust area on the concept, those spots appear flat and barren on this preproduction model. ItÂ’s still heavily covered in camo, though, so we donÂ’t yet know what the rear bumper design will look like in its final form. The production QX60 is set to be revealed next year where it will likely go on sale as a 2022 model year car. ItÂ’s unclear what powertrain(s) will be lurking under the hood, but at least we know the production version wonÂ’t stray terribly far from the concept now. Related Video: