2006 Infiniti G35 Sport Coupe 2-door 3.5l V6 on 2040-cars

Auto blog

Nissan and Infiniti recall 1.2 million vehicles because backup camera might go blank

Nissan North America has issued a recall for more than 1.2 million vehicles due to the ability to change backup camera settings to the point where there is no image in the display. The recall, which was filed with NHTSA on Sept. 12, 2019, includes cars, trucks, crossovers, SUVs, vans, and coupes across both the Nissan and Infiniti lineups.  Reported by Automotive News, NHTSA recall No. 19V654000 affects a total of 1,228,830 vehicles across two brand lineups and more than two dozen models. It includes the 2018-2019 Nissan Altima, Frontier, Kicks, Leaf, Maxima, Murano, NV, NV200, Pathfinder, Rogue, Rogue Sport, Sentra, Titan, Versa Note, Versa sedan; and 2018-2019 Infiniti Q50, Q60, QX30 and QX80. It also lists the 2019 Nissan GT-R and Taxis, as well as the 2019 Infiniti QX50, QX60, Q70, and Q70L. According to the recall, it is possible to adjust the backup camera and display settings "such that the rearview image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse." Although this type of occurrence would be extremely rare and most likely a mistake made by the driver, its real possibility means all of these cars are technically breaking the law. Federal Motor Vehicle Safety Standard (FMVSS) No. 111, "Rear Visibility," says so. According to Automotive News, this recall is not limited to the United States and also affects vehicles in Canada, South Korea, and Israel. The recall begins Oct. 19, 2019, and Nissan will provide affected customers with a free software update to fix the issue.        

Infiniti Prototype 9 is a wonderfully beautiful EV grand prix car

Few automobiles are as elegantly beautiful as the open-wheel grand prix cars of the 1940s, '50s and '60s. The simple, slender shapes of these cars bear no extravagant flourishes or adornments. The purposeful design is what gave these cars their beauty, and it's these classic machines that inspired the new Infiniti Prototype 9. Teased earlier this week, this concept blends old and new, with classic lines hiding a modern all-electric powertrain. The Prototype 9 will make its full debut next week at the 2017 Pebble Beach Concours d'Elegance. Infiniti says the car was built around a simple idea: what would a 1940s Infiniti grand prix car look like? While the silver paint may be more German than Japanese, the design could easily be mistaken for an actual '40s grand prix car. Only the Infiniti-styled grille gives it away. Everything about it, from the thin bias-ply tires wrapped over center-locking wire wheels to the bulging screws around the driver's seat, is pitch perfect. Underneath that achingly long hood rests a prototype electric motor and battery from Nissan's Advanced Powertrain Department. The combo sends 148 horsepower and 236 pound-feet of torque straight to the rear wheels. That's good enough to send the svelte 1,962 lb car to 62 mph in just 5.5 seconds. Top speed is right at 106 mph. While speed may die off towards the top end, all that torque and a 43/57 front to rear weight distribution should make the Prototype 9 a riot on a small, tight circuit. There's only enough juice in the battery for about 20 minutes of flat-out racing. The handmade steel body rests on a steel ladder-frame chassis. The front suspension uses a leading-arm rigid axle with transverse leaf spring while the rear uses a De Dion axle, also with a transverse leaf spring. The Prototype 9 also uses old-school hydraulic rotary type dampers. There's no power steering and no brake booster for the four-wheel disc brakes. The car was designed and built by a number of different departments within Infiniti and Nissan. A simple sketch expanded as more and more designers and engineers wanted to have a hand in the project. The steel body panels were all shaped and hammered by hand. The bare cockpit is only adorned with a thin seat, three gauges, a few switches, a gear selector and the steering wheel. The gauges are set into a fixed aluminum hub in the center of the steering wheel.

Infiniti Formula One-inspired Q60 Project Black S has been canned

Infiniti gave enthusiasts a preview of what a high-performance hybrid coupe equipped with Formula One-derived technology could look like when it released the Q60-based Black S concept in 2017. While executives hinted the 563-horsepower model could reach production sooner rather than later, the company confirmed it's been axed. Industry trade journal Automotive News learned the concept was consigned to the automotive attic from an Infiniti spokesman. He pointed out the design study "continues to inspire us," but he didn't explain why the Black S won't reach production. We're not surprised by the decision, though. It was a complex, eye-wateringly expensive version of a slow-selling model unveiled in 2015. Making the numbers add up was likely easier said than done.  Interestingly, many Infiniti dealers didn't want the Black S. "In today's market, a premium Japanese performance coupe has to be very low volume. Anything that Infiniti produces for its dealers, we want it to be a volume product. We're not really in the racing business. I would much rather see something like the QX60. That's a volume vehicle, that's where this company needs to go," opined Ed Lennon, the chairman of the Infiniti National Dealer Advisory Board, in an interview with Automotive News. Unveiled at the 2017 edition of the Geneva auto show, and presented again the following year in Paris, the Black S was powered by a gasoline-electric hybrid drivetrain built around the twin-turbocharged, 3.0-liter V6 that powers the Q60 Red Sport 400. It worked with three motor-generator units similar to the ones found in the Kinetic Energy Recovery System (KERS) fitted to Formula One cars. One spun the rear wheels, and the others were connected to the turbochargers to eliminate lag and deliver instant boost. Infiniti quoted a sub-four-second sprint to 60 mph. Hybrid technology adds weight, and Formula One-like components are no exception. Infiniti noted the drivetrain weighed 441 pounds more than the Red Sport 400's V6. Had it been built, the Black S would have relied extensively on carbon fiber to keep weight in check, and it would have offered a 50/50 weight distribution. Much has changed since 2017, however. Roland Krueger, the former Infiniti CEO who championed the project, left the company in January 2019 to lead Dyson's ill-fated automotive unit. Infiniti announced plans to exit the European market later that year, and it ended its participation in Formula One in 2020.