2006 Hyundai Sonata Gls on 2040-cars

Auto blog

Hyundai reveals a fourth, autonomous flavor of Ioniq

Hyundai added a fourth variant of the Ioniq line at this year's Los Angeles auto show, but this one isn't headed for production just yet. It's an autonomous concept that Hyundai is using to develop affordable, integrated hardware and software. Integrating all the hardware is something Hyundai is quite proud of, particularly the positioning of the lidar system in the front bumper. Hyundai says moving the lidar gear to the bumper allows the Ioniq "to look like any other car on the road and not a high school science project." We wonder if that statement was directed to Ford and its autonomous Fusion prototypes. The three lidar sensors are combined with a variety of other systems aboard the autonomous Ioniq. A number of the sensors are already going to be installed on production Ioniqs, including the radar for the car's Smart Cruise Control and the lane-keep assist cameras. The car's blind-spot radar will also be used for lane changes. Hyundai says by using these existing parts, implementing autonomous technology should be simpler and cheaper. These standard Ioniq sensors are all supplemented with a GPS antenna, high-definition mapping data, and a three-camera system installed just behind the windshield for detecting pedestrians, lane markings, and traffic signals. The car isn't just for show either. Hyundai has three of the autonomous Ioniqs testing in South Korea, alongside a pair of autonomous hydrogen fuel cell Tucsons. The company will also bring two autonomous Ioniqs to the 2017 Consumer Electronic Show. The cars will be there to give rides to the media. Related Video: Featured Gallery Hyundai Autonomous Ioniq concept View 19 Photos Image Credit: Hyundai Green LA Auto Show Hyundai Technology Emerging Technologies Autonomous Vehicles Sedan 2016 LA Auto Show hyundai ioniq

2019 Hyundai Santa Fe previewed in official renderings

As we near its official reveal in Geneva, Hyundai is trickling out more teasers of the 2019 Santa Fe crossover SUV. This time, instead of a dark photo, the company released a pair of renderings of the new family car. From what we can tell, it's like a huge, subtle Kona. At the front, we can see the SUV version of Hyundai's corporate "Cascade" grille complete with mesh insert instead of the slats found on Hyundai cars. The most obvious connection between this and the Kona are the headlights. It appears illumination may be split between slim, angry lamps high up, and a set of extra lamps lower in the fascia. The front fascia also looks more upright and tough than that of the current model. From what we've seen in spy photos, the front fascia seen in the rendering will translate very closely to real life. The illustrations also suggest the new Santa Fe will have much more sculpted, detailed flanks, too. Bolder plastic cladding shows up on the rocker panels, complete with contrasting aluminum brightwork. Another nod to the Kona shows up in the wheel arches. The creases rise up at the back, similar to the Kona's plastic flares. The rendering also shows a crease just below the windows running along the length of the Santa Fe. Looking at the last teaser image of the actual crossover, this crease is quite prominent. At the rear, the plastic cladding continues along the bottom. The hatch also looks more sculpted than the plain slab of the current model. It also appears to be raked forward more. But the forward rake is countered by the window line on the sides that rises upward. As mentioned with the front fascia, comparing these renderings to spy shots and the previous teaser, it looks like the production Santa Fe will look very much like it does here. Only the exaggerated things like the ultra-slim windows and massive wheels with rubber-band tires will be altered by the hands of rational, practical engineers. As such, the Santa Fe should be a pretty handsome family hauler, and a slightly bigger one than its predecessor, when it makes its debut at the Geneva show in March. Related Video:

US expands probe into ZF-TRW airbag failure-to-deploy to 12.3 million vehicles

DETROIT — U.S. auto safety regulators have expanded an investigation into malfunctioning airbag controls to include 12.3 million vehicles because the bags may not inflate in a crash. The problem could be responsible for as many as eight deaths. Vehicles made by Toyota, Honda, Kia, Hyundai, Mitsubishi and Fiat Chrysler from the 2010 through 2019 model years are included in the probe, which was revealed Tuesday in documents posted by the National Highway Traffic Safety Administration. It involves airbag control units made by ZF-TRW that were installed in the vehicles. The control units can fail in a crash, possibly because of unwanted electrical signals produced by the crash itself that can disable an air bag control circuit housed in the passenger compartment, according to NHTSA documents. The electrical signals can damage the control circuit, the documents say. ZF, a German auto parts maker which acquired TRW Automotive in 2015, said in a statement that it's committed to safety and is cooperating with NHTSA and automakers in the investigation. The case is another in a long list of problems with auto industry airbags, including faulty and potentially deadly Takata airbag inflators. At least 24 people have been killed worldwide and more than 200 injured by the inflators, which can explode with too much force and hurl dangerous shrapnel into the passenger cabin. The inflators touched off the largest series of automotive recalls in U.S. history involving with as many as 70 million inflators to be recalled by the end of next year. About 100 million inflators are to be recalled worldwide. On April 19, NHTSA upgraded the ZF-TRW probe from a preliminary evaluation to an engineering analysis, which is a step closer toward seeking recalls. So far, only Hyundai and Kia and Fiat Chrysler have issued recalls in the case. Four deaths that may have been caused by the problem were reported in Hyundai-Kia vehicles and three in Fiat Chrysler automobiles. NHTSA opened an investigation in March of 2017 involving the TRW parts in Hyundais and Kias. The upgrade came after investigators found two recent serious crashes involving 2018 and 2019 Toyota Corollas in which the airbags did not inflate. One person was killed. Jason Levine, executive director of the Center for Auto Safety, a nonprofit consumer group, said the ZF-TRW case shows the auto industry thus far has learned very little from Takata.