3.8 New 3.8l Nav Cd Wheels: 18 X 8.0j Machine Finished Aluminum Alloy Tachometer on 2040-cars

Auto blog

IED PassoCorso concept is a student-designed Hyundai we can get behind

Sometimes the best ideas come from fresh eyes, and a group of design students from Istituto Europeo di Design - better known as IED - are out to prove that sentiment with this striking Hyundai PassoCorto concept. This two-seat thesis project of the Master of Arts in Transportation Design program for the Turin, Italy school will be officially unveiled at the 2014 Geneva Motor Show beginning March 4.
The concept is said to be 161 inches long, 74 inches wide and 45.7 inches tall. It rides on a 96.5-inch wheelbase, which makes sense since passo corto means "short wheelbase" in Italian. The engine is tipped to be a mid-mounted, twin-turbo, 1.6-liter four-cylinder pumping out 266 horsepower. Judging by these images, we think the design looks fantastic, with all those sharp lines and creases drawing to a point in the rear. It shows a wonderful balance of being wild enough to draw attention, yet it almost looks realistic enough for the road.
The styling comes from 16 IED students coordinated by Luca Borgogno, lead designer for fabled Italian design house Pininfarina. The students were given a design brief by Hyundai to create a vehicle aimed at young, connected people like them. All of the students submitted a proposal, and two were selected to be merged together in a final look. The entire class contributed to bringing the design to full scale. Scroll down to get the full scoop on the little sports car concept.

New autonomous testing ground in Michigan will help battle bad weather

If one of the big weaknesses of autonomous vehicles is their ability to navigate in the snow, consider this a trial by fire. The American Center for Mobility says it has opened its $110 million driverless car testing facility on the site of a former General Motors assembly plant in Michigan, with Toyota and auto supplier Visteon the first to begin testing this week. The ACM proving ground is a 500-acre site at historic Willow Run in Ypsilanti Township, near Ann Arbor. It's one of 10 sites designated by the U.S. Department of Transportation as pilot proving ground sites to test AV technologies. It features a variety of simulated environments to test driverless cars, including a 2.5-mile highway loop, two double overpasses, intersections, roundabouts and a 700-foot curved tunnel. It also opens just as the region experiences a series of snowstorms and the first frigid temperatures of the season. That ability to test autonomous vehicles in a wide variety of weather conditions is important, as autonomous vehicle sensors have struggled to handle cold, wet and snowy conditions. Google parent Alphabet in October said its Waymo division was expanding its winter testing operations to Michigan, making it the sixth state where it's testing its driverless car systems. In a Medium blog post, Waymo CEO John Krafcik wrote that "This type of testing will give us the opportunity to assess the way our sensors perform in wet, cold conditions. And it will also build on the advanced driving skills we've developed over the last eight years by teaching our cars how to handle things like skidding on icy, unplowed roads." Waymo also opened a development center in suburban Detroit in 2016, working with Fiat Chrysler to integrate its autonomous technology into Chrysler Pacifica hybrid minivans. Visteon began testing and validating its DriveCore autonomous driving platform to evaluate algorithms, vehicle-to-vehicle and vehicle-to-infrastructure technology and other systems. Toyota used the facility Wednesday to begin orientation and driver training. ACM has so far secured $110 million to construct the first two phases from founders Ford, Hyundai America Technical Center, Toyota and Visteon, and says it expects to announce more investment soon.

We check out Hyundai's HRL exoskeleton, a robotic mobility suit for paraplegics

Hyundai makes some of the largest vehicles in the world – to wit, 185,000-ton ships with 56-foot high engines making power at 84 rpm – but its R&D division has found enough human-factor synergy with autonomous vehicle development that they're now working on robotic exoskeletons. We were recently introduced to two of these devices: the HRL designed to increase mobility and therefore quality of life for paraplegics; and the WEX, designed to assist in repetitive-motion lifting. Both of these machines are powered by replaceable lithium-ion battery packs with a 4-hour run time and 40-minute recharges. The HRL robotic legs are designed for people 64 to 71 inches tall and less than 250 pounds. The aluminum segments are adjustable in centimeter increments over a 10-cm range, and the 22.4-inch width means it would fit in many long-haul aircraft forward seats. With the 4.4-lb battery pack, the HRL weighs about 41 pounds. There are six 50:1 reduction-gear actuators, two pelvic actuators rated at 224 pound-feet of peak torque with 60-degree range of motion, and two hip and knee with 112 lb-ft peak, 180 degrees and twice the rotational speed of the pelvic motors. Twenty sensors control it all with default speed of just under a mile per hour and a top speed of 1.5 mph, and step length can be adjusted by smartphone via Bluetooth. One of the accompanying crutches has four thumb buttons much like a video-game controller, though they're experimenting with simpler inputs including a joystick. The crutch communicates with the leg unit over a few feet of distance via Zigbee wireless protocol, with security layers added for both obvious reasons and to ensure two users in the same vicinity won't transmit to the other's unit. An HRL can help you sit, stand, walk or climb and descend stairs; it will also stand on its own, simplifying the process of putting it on. Your correspondent is outside the design height limits so rather than do any impromptu CG research we deferred to colleague Chris Davies of Slashgear for impressions wearing it: "It grips tightly, the support would be comforting, and it delivers good posture. It does take some getting used to – when it first lifts up a leg to move it forward you do feel like you're going to fall over – but once you establish a gait and stop over-thinking it becomes much easier." Indeed, he never fell over and most who tried established a rhythm within a few minutes, if not a 1.5-mph sprint.