2014 Hyundai Elantra Limited on 2040-cars

Auto blog

2019 Hyundai Veloster shows off its colorful new face

The next-gen Hyundai Veloster is coming soon. When I was in Korea for the launch of the new Hyundai Kona, all three variants — standard, Turbo and N — were trotting around the automaker's proving grounds, teasing and laughing at us since we weren't allowed to use our cameras. After some sleuthing, we uncovered some new info. Thanks to the automotive media back in Korea, we have what appears to be official images of the new Veloster Turbo done up in some of the best-looking camouflage we've seen in a long while. The car will make its full debut at the Detroit Auto Show in January. It seems the car was shown off to the Korean press at Inje Speedway in Gangwon Province. The car retains the same basic three-door layout of the old model. That means two doors on the passenger side and one for the driver. The shape may be generally the same, but the car looks far cleaner than before. It's as if Hyundai's designers smoothed out all the lines and pulled the bodywork tighter to the frame. Like before, the exhaust appears to exit from the center, though the N model I saw in Korea and in spy photos has a more traditional dual-exit exhaust pipe. Floating red-painted calipers appear to clamp on some pretty large rotors. There appear to be two wheel designs, too. There aren't any photos of the interior, but once again our spy photographers have come through. The press release we found also lists a new heads-up display. Since these photos came from Korea, we contacted representatives at Hyundai here in the U.S. for more info, but weren't given any clear answers. All we were told was that the images came from their counterparts in Korea. Expect the Veloster Turbo to share the 201-horsepower turbocharged 1.6-liter inline-four and transmissions from the Elantra GT Sport. Korea apparently gets a 1.4-liter engine, but it's unclear if that's coming here. We hope the hopped-up Veloster N will get the 271-horsepower turbocharged inline-four from the i30 N. Hyundai has been on a killer roll as of late. We can't wait to drive this. Related Video:

Feds open investigation into recall of 1.7M Hyundais, Kias

US safety regulators have opened a formal investigation into the recall of nearly 1.7 million vehicles by Hyundai and affiliate Kia over engine defects, according to filings published Saturday. A South Korean whistleblower reported concerns last year to the National Highway Traffic Safety Administration (NHTSA), which will probe the timeliness of three recalls carried out in the United States and whether they covered enough vehicles. Fines could be imposed on the automakers if the NHTSA determines the recalls were not conducted properly. The agency did not immediately comment on the probe. A Hyundai spokesman in Seoul the company "has conducted recalls in compliance with US regulations and procedure" and will "sincerely" cooperate with the investigation. In 2015, Hyundai recalled 470,000 U.S. Sonata sedans, saying engine failure would result in a vehicle stall, increasing the risk of a crash. At that time, affiliate Kia did not recall its vehicles, which share the same "Theta II" engines. Kim Gwang-ho, then an engineer at Hyundai, flew to Washington in August 2016 to tell NHTSA the companies should have recalled more vehicles over the problem, citing an internal report. He also reported several alleged safety lapses to both U.S. and South Korean authorities. On March 31, Hyundai expanded its original U.S. recall to 572,000 Sonata and Santa Fe Sport vehicles with "Theta II" engines, citing the same issue involving manufacturing debris, the NHTSA said. On the same day, Kia also recalled 618,160 Optima, Sorento and Sportage vehicles which use the same engine. The recall, which was also conducted in Canada and South Korea, cost the duo 360 billion won ($322.40 million). "TIMELINESS AND SCOPE" According to the filings published Saturday, the agency opened a probe May 18 into "both the timeliness and scope" of the "Theta II" engine recalls and their "compliance with reporting requirements." In August 2014, Hyundai agreed to pay a $17.35 million fine to settle a NHTSA investigation it delayed the recall of 43,500 Genesis cars to fix a brake defect linked to two injuries. NHTSA said in 2014 Hyundai "must change the way they deal with safety-related defects." Hyundai vowed to make improvements to how it handled safety issues after the fine. In 2015, the company retained former U.S. Transportation Secretary Ray LaHood as an adviser on safety issues.

We check out Hyundai's HRL exoskeleton, a robotic mobility suit for paraplegics

Hyundai makes some of the largest vehicles in the world – to wit, 185,000-ton ships with 56-foot high engines making power at 84 rpm – but its R&D division has found enough human-factor synergy with autonomous vehicle development that they're now working on robotic exoskeletons. We were recently introduced to two of these devices: the HRL designed to increase mobility and therefore quality of life for paraplegics; and the WEX, designed to assist in repetitive-motion lifting. Both of these machines are powered by replaceable lithium-ion battery packs with a 4-hour run time and 40-minute recharges. The HRL robotic legs are designed for people 64 to 71 inches tall and less than 250 pounds. The aluminum segments are adjustable in centimeter increments over a 10-cm range, and the 22.4-inch width means it would fit in many long-haul aircraft forward seats. With the 4.4-lb battery pack, the HRL weighs about 41 pounds. There are six 50:1 reduction-gear actuators, two pelvic actuators rated at 224 pound-feet of peak torque with 60-degree range of motion, and two hip and knee with 112 lb-ft peak, 180 degrees and twice the rotational speed of the pelvic motors. Twenty sensors control it all with default speed of just under a mile per hour and a top speed of 1.5 mph, and step length can be adjusted by smartphone via Bluetooth. One of the accompanying crutches has four thumb buttons much like a video-game controller, though they're experimenting with simpler inputs including a joystick. The crutch communicates with the leg unit over a few feet of distance via Zigbee wireless protocol, with security layers added for both obvious reasons and to ensure two users in the same vicinity won't transmit to the other's unit. An HRL can help you sit, stand, walk or climb and descend stairs; it will also stand on its own, simplifying the process of putting it on. Your correspondent is outside the design height limits so rather than do any impromptu CG research we deferred to colleague Chris Davies of Slashgear for impressions wearing it: "It grips tightly, the support would be comforting, and it delivers good posture. It does take some getting used to – when it first lifts up a leg to move it forward you do feel like you're going to fall over – but once you establish a gait and stop over-thinking it becomes much easier." Indeed, he never fell over and most who tried established a rhythm within a few minutes, if not a 1.5-mph sprint.