2009 Hummer H3t Alpha Sut V8 4x4 Lifted Nav Rear Cam 8k Texas Direct Auto on 2040-cars

Auto blog

Why didn't GM recall fire-prone Hummers earlier?

As early as 2009, motorists reported fires in the Hummer H3. In a complaint filed that March with the regulatory agency in charge of vehicle safety, one motorist said they leaped into a smoldering vehicle and drove it away from gas pumps moments before it was engulfed in flames. Three months later, another motorist described how a fire spread from behind the glove box and consumed their H3. Dozens of car owners filed similar complaints with the National Highway Traffic Safety Administration in the six years that followed, detailing car fires of varying severity that originated in the HVAC systems of their Hummer H3s. But General Motors didn't issue a recall for any of the affected cars until last week, prompting fresh questions about how the company treats safety concerns in the wake of an ignition-switch flaw that went unaddressed for years and, at latest count, is responsible for killing at least 124 motorists. In recall documents filed with NHTSA last week, GM initially said it knew of three fires associated with the defect. Within hours, the company said it knew of 42 fires associated with the problem and three injuries sustained by vehicle occupants. A company spokesperson attributed the inconsistency to a "misstated" number in the original documents and that the higher number comes from NHTSA complaints, reports to GM and TREAD data. Beyond that discrepancy, the documents show General Motors, which has touted a revitalized attitude toward safety concerns since the ignition-switch recalls, did nothing upon determining there was a problem with the H3s. Prompted by two complaints the company received in September 2014, General Motors says it launched an internal investigation related to melting blowers in the HVAC system on December 8, 2014. In that investigation, the company says it confirmed a problem existed, finding that "mismatched electrical conductivity could result in overheating and melting of the blower motor connector module." But even with that conclusion, the company opted to close its internal investigation on April 29, 2015, without taking any action. It wasn't until NHTSA officials met with GM representatives in a meeting on June 18, 2015, that General Motors was prompted to reconsider.

Mil-Spec M1-R First Drive Review | The ultimate Hummer H1 gets better

In 2018, we got our first introduction to Mil-Spec, a company that sought to do to Hummer H1s what other resto-mod companies like Singer and Icon have done to other classic cars. Its initial run of hopped-up Hummers showed quite a bit of promise with an array of mechanical upgrades, including a particularly potent and entertaining diesel engine, plus major improvements to interior livability and luxury. As good as the initial trucks were, Mil-Spec wanted to do even better. It focused on details such as better materials and ergonomics for what it’s calling the second-generation of restored H1s. And all those upgrades are on display in the M1-R, which takes the second-gen M1 and adds some pretty extreme customer-requested modifications. @autoblog WhatÂ’s that? Oh nothing, just a Mil-Spec M1-R rolling on by ##autoblog ##hummer ##m1r ##custom ##fyp ? original sound - Autoblog As with all Mil-Spec Hummers, the M1-R received a comprehensive restoration, taking the body and frame down to bare metal. It was recoated in a durable bedliner-style material made with bits of Kevlar. This particular one was given a tint to make it look like one of the factory H1 colors, Competition Yellow. Steel off-road bumpers, a front brush guard, rear tubular tire rack, fender flares and door panels finished in plain black add contrast and help give it a more rough-and-tumble look. The simple and rugged 20-inch Black Rhino wheels look right at home on the truck, too, especially wrapped in the 38-inch off-road tries. Most of the improvements in the second-gen M1 are found within the cabin. As before, every upholstered surface is made of leather, in this case with diamond stitching that the customer requested. ItÂ’s all done in-house (fun fact, Mil-Spec is now also doing upholstery for private jets). Virtually every non-upholstered surface is made from machined aluminum. That includes the steering wheel, climate control knobs, air vents, window switches, turn signal stalks, even the custom-made ignition key. They all look and feel superb with hefty weight and crisp edges. The toggle switches are a particular treat and return a light, mechanical click with each press. Some of them are a little tough to reach as a result of the HummerÂ’s strange interior layout, but that would be the case even in a stock Hummer. These aluminum pieces are a massive step up from the plastic rocker switches and air vents used on previous Mil-Spec Hummers.

GM Design shows another early Hummer EV sketch

Like a new mother who's still so excited about her one-year-old baby that she can't stop showing ultrasound photos, General Motors is so excited about its biggest new baby, the battery-electric GMC Hummer, that it can't stop showing off development design sketches. The off-road monster with the 200-kWh Ultium battery pack debuted online on October 21 last year. The next day, the GM Design Instagram page posted some of the Hummer's early "theme sketches" leading to the production version. These had a conceptual flair to them, but were rather restrained. A month later, GM uncovered a series of development renderings showing off a much wilder truck bursting with more angles than a geometry text book. The archives have opened up again with a new "ideation sketch," this one between the first believable sketches and the second truck that Master Chief and Doomguy share on their days off.  All three sets of drawings show similar three-box proportions, it's the details that got a ton of love. On this newest sketch, the fenders flare a touch more than on the production truck, but the wheel wells are cut with the kind of clearance found on a Baja 1000 Trophy Truck. Out back, save for the tow hooks, the rear end is totally different than production. The sketch puts illuminated Hummer script across a narrow tailgate flanked by small square, taillights housing six individual elements. Beneath that, a bumper-less rear end puts nothing more than a sloped bash pate between the truck and the rocks it's just scrambled over. To our eyes, this is the best blend of production-ready comfort from the first sketches and zoot suit angles from the second that we've seen so far.  First deliveries of the GMC Hummer EV Edition 1 are expected before the year is out. When we get a chance to absorb the truck in its native habitats, we'll know whether there's cause for disappointment at what could have been. If so, with all this hunger among the monied for something different, we feel like restomodders have been given the perfect head starts on custom rebodied Hummers that would make things right. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.