2003 Hummer H2 Base Sport Utility 4-door 6.0l on 2040-cars

Auto blog

GMC Hummer EV revealed as a 1,000-hp, 350-mile, fast-charging beast

The 2022 GMC Hummer EV has finally been revealed, and it certainly looks the part. It has chunky, squared-off styling, big tires pushed to the edges, and a towering fascia. But it’s not a case of form over function. On the contrary, the Hummer EV is has some pretty wicked technology and gear under the skin. The first version of the Hummer EV that will be available is the tricked-out Edition 1. It features three electric motors, which allows for torque vectoring. These motors make 1,000 horsepower, though GMC still hasnÂ’t given real-world torque numbers. The motors are fed by a 24-module Ultium battery pack. The pack can provide an estimated 350 miles or more of range. Not only that, but it supports 800-volt fast charging up to 350 kW. ThatÂ’s comparable to PorscheÂ’s charging system, and GMC says it can add an extra 100 miles of range in just 10 minutes. Later, a two-motor Hummer EV and a three-motor version without torque vectoring. The Hummer EV rides on fully independent suspension with adaptive air shocks. They can provide continuous damping adjustments for comfort, and have a height adjustment range of 6 inches. When set in its max-height off-road mode, it has two additional inches of ground clearance, and the "Extract Mode" will lift it six inches higher than default. The Edition 1 model also comes with standard 35-inch mud terrain tires, and combined with the suspension, the Hummer EV has a fording depth of 2 feet and the capability to climb over an 18-inch vertical obstacle. Owners will be able to easily add more clearance since GMC made the wheel arches large enough to accommodate aftermarket 37-inch tires. Additional off-road goodies include skid plates along the chassis, rock sliders, the previously covered four-wheel steering with Crab Mode diagonal driving, and 18 camera views including angles under the truck for getting over rocks. Those cameras feature sprayers, too to keep them clean. Detailed information on torque output, torque vectoring, tire pressure, vehicle angles and more are also displayed on the infotainment screen. Speaking of that infotainment screen, itÂ’s a massive 13.4 inches and is paired with a 12.3-inch instrument display. They feature proudly in a squared-off, rugged-looking interior. The Hummer EV will get the latest version of Super Cruise, complete with automatic lane-changing. The Edition 1 gets the removable roof panels as standard, and those roof panels are clear, so you can still get some sun with them in place.

How a New York cabby can get an MV-1 taxi for just $11k

AM General – the same company that's behind the Hummer – is making it easier for taxi drivers to buy one of its wheelchair accessible cabs in New York. Between the factory's own incentives and those offered by the city, the new MV-1 Empire Taxi can cost as little as $11,200. Unlike other vehicles that can be converted after production for handicapped mobility, the MV-1 is designed by AM General from the get-go as a wheelchair-accessible vehicle. Mobility Ventures LLC – the AM General subsidiary responsible for the MV-1 – displayed a yellow cab version at the New York Auto Show in 2012, and is now bringing it to market as the MV-1 Empire Taxi. Pricing has been announced, and it is rather competitive, to say the least. Mobility Ventures charges $33,000 for one of its wheelchair-accessibly taxis. But the NYC Taxi & Limousine Commission is offering a $14,000 grant toward the purchase of a wheelchair-accessible cab, bringing the purchase price down to $19,000. Of course, the Commission will offer the same incentives towards the purchase of any wheelchair-accessible vehicle, but converting an existing van for the purpose generally costs a good $10-20k. So while a Nissan NV200 Taxi of Tomorrow, for example, might start at under $30k, add in the cost of mobility conversion and you're looking at a lot more – a solid $10k more, according to Mobility Ventures. If the $19k purchase price isn't enough to get New York cabbies on board, the manufacturer and the commission are offering further incentives for some customers. For every wheelchair-bound passenger a driver picks up, the city will pay the cabby 50 cents – that may not sound like a lot, but it adds up over time. What's more, Mobility Ventures will match the incentive for the first 25 customers who buy an MV-1 Empire Taxi, which combined can come to as much as $7,800 in payments over the course of a year. Work that into the equation and the end cost of the new Empire Taxi could come out to just $11,200. Mobility Ventures is working with other cities to offer similar incentives, with negotiations currently under way in Washington with the DC Taxi Commission. Mobility Ventures Unveils New "MV-1 Empire Taxi" for NYC - More Legroom and Luggage Space Than any Other Taxi or Wheelchair Accessible Vehicle - Innovative Program will Match TLC Payments to Drivers for Every Ride in a Wheelchair Accessible Vehicle, Along with Special MV-1 Purchase Discounts NEW YORK, Jan.

Mil-Spec M1-R First Drive Review | The ultimate Hummer H1 gets better

In 2018, we got our first introduction to Mil-Spec, a company that sought to do to Hummer H1s what other resto-mod companies like Singer and Icon have done to other classic cars. Its initial run of hopped-up Hummers showed quite a bit of promise with an array of mechanical upgrades, including a particularly potent and entertaining diesel engine, plus major improvements to interior livability and luxury. As good as the initial trucks were, Mil-Spec wanted to do even better. It focused on details such as better materials and ergonomics for what it’s calling the second-generation of restored H1s. And all those upgrades are on display in the M1-R, which takes the second-gen M1 and adds some pretty extreme customer-requested modifications. @autoblog WhatÂ’s that? Oh nothing, just a Mil-Spec M1-R rolling on by ##autoblog ##hummer ##m1r ##custom ##fyp ? original sound - Autoblog As with all Mil-Spec Hummers, the M1-R received a comprehensive restoration, taking the body and frame down to bare metal. It was recoated in a durable bedliner-style material made with bits of Kevlar. This particular one was given a tint to make it look like one of the factory H1 colors, Competition Yellow. Steel off-road bumpers, a front brush guard, rear tubular tire rack, fender flares and door panels finished in plain black add contrast and help give it a more rough-and-tumble look. The simple and rugged 20-inch Black Rhino wheels look right at home on the truck, too, especially wrapped in the 38-inch off-road tries. Most of the improvements in the second-gen M1 are found within the cabin. As before, every upholstered surface is made of leather, in this case with diamond stitching that the customer requested. ItÂ’s all done in-house (fun fact, Mil-Spec is now also doing upholstery for private jets). Virtually every non-upholstered surface is made from machined aluminum. That includes the steering wheel, climate control knobs, air vents, window switches, turn signal stalks, even the custom-made ignition key. They all look and feel superb with hefty weight and crisp edges. The toggle switches are a particular treat and return a light, mechanical click with each press. Some of them are a little tough to reach as a result of the HummerÂ’s strange interior layout, but that would be the case even in a stock Hummer. These aluminum pieces are a massive step up from the plastic rocker switches and air vents used on previous Mil-Spec Hummers.