2002 Honda S2000 Turbo, 2,4 Litres, Black, on 2040-cars

Auto blog

Mid-engine Honda sports car surfaces in EU patent drawings

Based on new patent drawings, Honda clearly isn't done with sports cars. The design you see above was registered and published by the European Union Intellectual Property Office (EUIPO) and was first reported by AutoGuide. The drawings show a rakish, angular sports car design that is very clearly mid-engine. It could almost pass for a Lamborghini. But the name on the design is Honda Motor Company, and aside from the name, it bares a strikingly similar appearance to a mid-engine design found in a Honda patent two years ago. In fact, the only major difference between this car and the older one (seen below) is the lack of a windshield and top. The shape of the lights and the grille, as well as the front fender vent and character lines running from it, are reminiscent of the S660 kei roadster for Japan. The large, angular intakes look more related to the Acura NSX, though. View 6 Photos Unlike the previous patent renderings of the car, this one has an interior, and the inclusion of it may be why the top and windshield are absent. The interior also leads us to believe that this design is for an upcoming concept. The steering wheel is a small, rectangular piece similar to what you would find in an F1 car or Indy car. The seats also look like thin buckets designed to be as sporty and light as possible. A production version would probably have a bit more cushioning and a round wheel. It does look like there is a pushbutton transmission setup in the center console like current Acuras, though. So what does this mean? Honda is clearly still working on this design, and based on some of the more radical design choices for the interior, we're likely looking at a concept car that will show up in the next couple of years. Whether a concept will lead to a production car is tough to say. There's definitely room in Honda's global sports car roster between the S660 and NSX for something in between, and Honda has reported that it's getting pressure from dealers for sporty cars. The exterior design isn't so extreme it couldn't be tweaked for production, either. There have also been rumors that Honda is preparing a mid-engine hybrid sports car with the Type R's turbocharged four-cylinder. Honda also holds a trademark for the name "ZSX," which fits the naming scheme of the NSX and old RSX, but at least in Europe, Honda has held the trademark since 2009. We'll just have to wait and see what Honda does.

Honda Project 2&4 is our kind of sidecar sideshow [w/video]

Honda makes cars and Honda makes bikes. It makes a whole lot of other things, too, but those are the two areas of expertise that have given rise to the thoroughly enticing Project 2&4 concept. It's one of the smallest vehicles unveiled here at the 2015 Frankfurt Motor Show, but also among the most enticing. The result of a global in-house design competition, Project 2&4 was envisioned by the company's motorcycle studio in Asaka and brought to fruition with help from the automotive studio in Wako. It's powered by the 1.0-liter V4 engine Honda developed for MotoGP competition, driving 212 horsepower and 87 pound-feet of torque through a six-speed, dual-clutch transmission. With less than 900 pounds to motivate, that adds up to blistering performance of the kind we'd give most anything to experience firsthand. The 14,000-rpm redline would be enough to make our heart sing all on its own, but the novelty of Project 2&4 is its design. As you can see, it hands the driver's seat and controls off the side, with room for a hold-on-for-dear-life passenger seat on the other side. The neo-retro styling is inspired by the company's RA272 grand prix racer from the Sixties, but gives up on the center driving position for an altogether more original configuration. The result looks ready to take on the likes of the Ariel Atom and BAC Mono... to say nothing of the curbs of Suzuka and Fuji. If only Honda were (able) to put it into production.

Honda Project 2&4 concept has 212 hp, 893 lbs, and our hearts

Take one look at the Honda Project 2&4 concept, and it's immediately clear that the minimalist track special is the result of a collaboration between automotive and motorcycle designers. The body's styling is a modernized take on the Japanese brand's RA272 Formula One car from the 1960s, but then you notice the weird driver's seat that's fully exposed and suspended just inches above the road. The result is a vehicle that looks absolutely deadly, but like an absurd thrill to pilot, too. The Project 2&4's floating seating design simultaneously evokes both a sport bike and a go-kart. There's no dashboard or windshield at all, and the driver simply gets a steering wheel and a glass panel for the instruments. It's hard to imagine pairing things down much more than this, especially since the whole vehicle weighs just 893 pounds. The concept's other major piece of motorcycle DNA is the mid-mounted 1.0-liter V4 sourced from Honda's RC213V that races in MotoGP. Tuned here for road use, it puts down over 212 horsepower when spinning at 13,000 rpm, and peak torque of 87 pound-feet hits at a still stellar 10,500 rpm. The redline is at a stratospheric 14,000 rpm. The high-revving engine bangs through the gears through a six-speed dual clutch transmission. Unfortunately, the Project 2&4 has zero provisions for even a modicum of driver safety, and that makes it exceedingly unlikely for one to ever see customer orders. We still look forward to seeing that bizarre, floating seat on display at the 2015 Frankfurt Motor Show, though. HONDA PROJECT 2&4 POWERED BY RC213V TO DEBUT AT FRANKFURT: A COMBINATION OF GLOBAL CREATIVITY AND CRAFTSMANSHIP Winner of Honda's 'Global Design Project' to debut at the Frankfurt Motor Show Cabin-less structure features a floating seat design for immersive driving experience Powered by Honda's MotoGP RC213V engine, modified to run on public roads 'Honda Project 2&4 powered by RC213V', the winning entry from Honda's 'Global Design Project', will make its global debut at the 66th Frankfurt Motor Show at stand B11 in Hall 9.0. Embodying the concept of 'creative craftsmanship', Honda Project 2&4 celebrates Honda's position as the world's leading engine manufacturer, providing engines to 28 million people per year across two- and four-wheel automotive, power equipment, marine and aerospace applications.