2024 Honda Pilot on 2040-cars

Auto blog

Renewed deal continues to give Honda power to Ariel models

You can expect to hear screaming Honda engines in Ariel's stripped down vehicles for even longer; the two companies have just reaffirmed their exclusive powerplant supply deal in the UK. Ariel's models have used Honda power for the last 16 years. Just in time for the updated agreement, the eight technicians at the sports car brand's tiny factory just completed their 1,500th model with the Japanese automaker's high-revving engine. The basic Atom in the UK comes with the naturally aspirated 2.0-liter K20Z engine, and Ariel fits the mill with an exhaust and custom ECU tuning to make 245 horsepower. An optional supercharger can push the output to 310 hp or up to 350 hp. The top versions can reach 60 miles per hour in less than 2.7 seconds and a top speed over 155 mph. Ariel's other products have different Honda powerplants. The company's new Nomad uses a 2.4-liter K24 with 235 hp, and an optional supercharger can give the off-roader 290 hp. For those that prefer two wheels, the Ace motorcycle packs a 1,237cc V4 with 173 hp. In the US, the Atom wasn't always available with Honda power. Brammo, which previously imported the sports cars here, fitted them with a 2.0-liter EcoTec four-cylinder engine from General Motors. Ariel toyed with other powerplants, too, like its 500-horsepower V8 in the Atom 500. HONDA (UK) AND ARIEL RENEW EXCLUSIVE ENGINE SUPPLY DEAL AS 1,500TH HONDA-POWERED ARIEL ROARS OUT OF THE FACTORY Honda (UK) and Ariel renew exclusive engine supply deal as 1,500th Honda-powered Ariel roars out of the (very small) factory Honda (UK) and Ariel Motor Company renew exclusive engine supply deal for Atom and Nomad 1,500th Honda-powered Ariel in 16 years roars out of the factory Supercharged Civic Type R engine delivers a scorching 350bhp and top speed of more than 155mph in the famed Ariel Atom Honda (UK) and Ariel Motor Company have renewed their 16-year strong exclusive engine supply agreement which sees the famed Atom powered by the Civic Type R engine, and the new off-road Nomad by the Civic 2.4 unit. The news comes as the two brands celebrate the 1500th Honda-powered Ariel roaring out of the small factory in Somerset, where just eight highly skilled build technicians spend 100-200 hours painstakingly hand-crafting one vehicle each at a time, from start to finish. Over the last 16 years 1,500 new Ariels have been built here – just a few day's work for Honda's Civic-producing Swindon plant.

Junkyard Gem: 1997 Acura 1.6 EL

Drivers from Mexico or Canada who take their cars across the border into the United States may drive them legally here for one year, after which they must drive back home or go through a registration process that ranges from arduous to impossible, depending on the state. As a result, quite a few Canadian- and Mexican-market cars end up marooned and un-registerable here, and I find some of them during my junkyard travels. Today, we've got a Canada-only Acura that showed up in a Northern California boneyard recently. I'm always looking for junkyard odometers with very high final readings (right now a 631k-mile Volvo 240 holds the record), and at first glance I though I had come across a Civic sedan with nearly 450,000 miles. Then I noticed the metric speedometer and realized that I was looking at a non-US-market car. 448,538 kilometers is 278,709 miles, by the way. A look at the build tag and emissions stickers showed that this car was built and sold in Canada. I'd found a second-generation Acura EL in a Colorado junkyard a few years back, so I knew that I'd just found a first-generation EL. Like its Acura Integra contemporary, the Acura EL was based on the Honda Civic. It replaced the Integra in Canada for 1997 and production continued through 2005. It differed somewhat in appearance from the Civic and had a nicer interior but was mechanically nearly identical to the US-market Civic EX sedan. A version for the Japanese market was built in Canada and exported across the Pacific as the second-generation Honda Domani. The engine is a 1.6-liter SOHC four-banger with VTEC, rated at 127 horsepower and 107 pound-feet. This one appears to be a loaded EL Premium, with the optional four-speed automatic. List price would have been C$22,000, or about $30,676 in 2023 United States dollars (using the exchange rate for June of 1997). The decklid had an EL-only spoiler, so a local Honda expert must have bought it for a Civic sedan. Since this car was old enough to be federally legal under the 25-year rule, it could have been registered legally in some US states… but California's strict emissions regulations would have made the process too difficult to be worth undertaking on a near-300k-mile machine that isn't particularly exotic.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.